Question about Cars & Trucks

1 Answer

Vt commodore rack boots - Cars & Trucks

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 79 Answers

Vt commodore steering Rack boots always rip and tear,the racks always tend to leak from the internal seals.
So if this the case with yours I would recommend you just get a reconditioned steering rack and fit it but once the rack is replaced you will also need to do a wheel alignment.
steps to change rack .
1.raise vehicle on hoist
2.remove front wheels
3.remove tie rod end split pins
4.undo tie rod end nuts and inner nuts on rack ends
5.release tie rod end from hub.
6.centralise steering wheel and remove keys from ignition
7.count the number of turns on each side that tie rod come off and write down .
8.undo the 2 metal pipes that go into the rack feed and return lines and make sure u have container under the vehicle to collect old fluid.
9.undo the 13mm nut and bolt that mounts the rack to the steering colum shaft.
10.undo the 2 *19mm bolts and nuts that mount the rack to the crossmember.
11.gentle wiggle the rack and it will come away.
12.follow these steps in reverse when fitting new rack.,make sure you replace the oring seals .
13.you will need to get a wheel alignment done..

Posted on Feb 22, 2015

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 288 Answers

SOURCE: vt 3,8 transmision slips when warmed up ?after stoping at the T.L must turn off engine than back on in order to keep going

Have you checked the oil lately? Might need changing also the filter.

Posted on Nov 15, 2011

alicantecoli
  • 22219 Answers

SOURCE: commadore vt key will not turn ignition on

providing you have the chipped key in then its possible just like the old days but iam wary on giving this information out ,do you mean the key will not turn if so then the steering lock will not release except a VW ,or does key turn and nothing happens

Posted on Feb 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car stays in first gear when driving it's a vt commodore


automatic ?
GM 4L60E transmission.

low oil
faulty shift solenoid

if transmissions shot
approx $350-400 gets a better one from a wrecker

repair manual for the auto is online
and some youtubes made on theses automatics

join this free forum
best VT commodore owners think tank in australia
https://forums.justcommodores.com.au/forums/vt-vx-holden-commodore-1997-2002.10/

Mar 07, 2017 | Cars & Trucks

1 Answer

Need to know colour of pulse wire to speedo to fit after market cruise control on vt commodore v6 auto


my replay to your same question
has VT repair manual link and Vt commodore forum link

Oct 31, 2016 | Cars & Trucks

1 Answer

My battery went flat and I jump started my car (Holden VT) now my stereo is locked. Dose anybody know how to unlock it. It's a eurovox radio unit.


Samantha, You need the VIN and the radio serial number. Take those into a Holden dealer to get the radio code and programming instructions from the dealer. They may want a small fee for the #. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002/131983-vt-stock-radio-cassette-player-security-code.html
Radio Security code Street Commodores Online Forum
Go Technologies Eurovox FAQs

Aug 26, 2016 | Holden Cars & Trucks

1 Answer

Please help... my heater will not work in my vt commodore. Where is the fuse for this please?


i own a VT commodore

no fuse vacuum driven
heater tap is in the engine bay drivers side


take time to join just commodores forum
http://forums.justcommodores.com.au


26206984-r2ugqs25e0pyyy0hkxf5y1qh-1-0.png

May 28, 2016 | Holden VT Cars & Trucks

1 Answer

Step by step method on how to put fan belt back on commodore 98


Hi Sharon, The link below is a diagram of pictures for 1998 VT commodore fan belt.........CHEERS MATE..

how to put fan belt back on commodore 98 Google Search

Apr 15, 2016 | 1998 Holden VT Commodore

1 Answer

Is a VT SS commodore rack pinion steering arm the same as the VT rack pinion or they different from V6 to 5 ltr


Ask at the parts shop for the part numbers if they are the same they can be changed.

Mar 12, 2015 | Cars & Trucks

1 Answer

Vt shifter button


this is not an uncommon problem.
you will need to go to your local holden dealer and purchase a new gear shift button.
To fit the new gear shift button you will need to remove the centre console insert and the screw that holds the t-bar trim in position..

Jul 03, 2013 | 1998 Holden VT Commodore

1 Answer

Realign a vt boot


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..

Sep 04, 2012 | 1998 Holden VT Commodore

1 Answer

I need a diagram for a 2000 commodore vt 3.8 v6 engine so i can change the heads. i tryed to entre make and model but didnt have holden


Steve,

I suggest you join up the Commodore Forum and pose your question there. You will find people there helpful. There is a sub-forum for the VT model.

http://forums.justcommodores.com.au/forum.php#holden-commodore-related

Sep 08, 2011 | Oldsmobile Calais Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...