Question about Cars & Trucks

Open Question

Pt cruiser oil light and chime comes on - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 80531 Answers

SOURCE: oil light keeps coming on and beeps

This is the pressure light, nothing to do with the oil needing to be being changed, you have low oil pressure being indicated, this will destroy the engine if the light is really indicating low oil pressure, have the oil pressure tested with a mechanical test guage at a shop, if the oil pressure is ok then replace the oil pressure light sending unit.

Posted on Nov 23, 2008

Ad
Remontti-J
  • 32 Answers

SOURCE: pt cruiser 2001 oil consumption

I have run with my PT 290,000 km until now and oil consumption is about 1 litre/12,000 km.

Posted on May 29, 2009

SOURCE: How do you turn off the seat belt chime on a 06 PT

I'm assuming your asking this so you can keep the belt off. If that is the case just plug it in sit on the belt. Otherwise you can start pulling fuses till it shuts off or you can go to the chimer and unplug it. If you pull a fuse you may also shut something else off. Since this is a safety feature for yourself and the passenger and in most states a law I don't think anyone should tell you exactly how to bypass this feature. But I do know how annoying it can be. If it didnt warn you to put it on you could forget and get injured.

Posted on Jul 29, 2009

  • 603 Answers

SOURCE: our 2003 pt cruiser's oil light came on. the car

Low oil pressure turns on the light, not a low level of oil. You might have a serious problem.

Posted on Jan 07, 2010

agent91
  • 2100 Answers

SOURCE: I have a 04 pt cruiser with airbag light and chime

p1685,,"skim invalid key"
I have no idea what they are talking about, but that is the code.

DTC P1685 is Invalid SKIM Key. The Sentry Key Immobilizer Module (SKIM) is part of the security system and kills the vehicle when a wrong key is used. There may be a problem with your key or the chip reader in the ignition switch. This is something the dealer will need to determine for sure. This code will also be set if someone actually tried to steal the vehicle.


My guesswould beto reset your PCM (unhook bat. and depress brake for 1 min), then try to start the car. If that doesn't work, I guess haul it into a dealership so they can run a diagnostic quote.gif

I got this from another site, check it out.

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's indicated when engine warning light comes on 2002 PT Cruiser


any time a warning light comes on there is a problem that needs to be checked out. you don`t say what warning light comes on, oil light, check engine light, coolant light.

Oct 10, 2014 | 2002 Chrysler PT Cruiser

1 Answer

I have a 2005 Chrysler PT Cruiser at just over 80,000 miles. At random intervals, the warning chime will sound off for no apparent reason. There are no warning lights on the dashboard. There are no error...


Check to see if you have a water level indicator in the top of the radiator . A small plastic fitting with 1 wire from it. IF so it works when there is no water around it and will activate an alarm to warn you of lost water in the cooling system. The problem here is that the radiator cap will allow heated water out to the reservoir but on cooling down insufficient water is drawn back in to keep the top tank completely full. So there is a space that will allow water to miss the unit (cornering-stopping-hills up or down) momenterially and hence the unit chimes intermittently. Check if the top tank is completely full when cool.

Sep 06, 2013 | 2005 Chrysler PT Cruiser

1 Answer

2006 pt cruiser oil light


It's OK that oil light flickers or comes on while starting. It turns off when oil pressure comes up to normal. That won't happen till car is running.

Jul 12, 2013 | Cars & Trucks

1 Answer

Engine codes po325 po442 and air bag light


Determine what the code descriptions of errors are. Then check and replace as needed.
Airbag light indicates problem with airbag system. You must visit the dealer to have analyzed and diagnoses given. Do not attemp to fix yourself. The airbag system, can cause severe injury or death.

Jan 21, 2013 | 2003 Chrysler PT Cruiser

2 Answers

Oil pressure light comes on


i would suggest you change the oil pressure switch ,also called oil sending unit first. this part is not that much and isnt hard to do.if that doesnt fix it then you might have an oil pump going out

Dec 10, 2012 | 2005 Chrysler PT Cruiser

1 Answer

The light on my PT Cruiser, 2005, comes on and chimes. There is oil in the car and the car runs fine. Is there a reset switch that should have been reset after I had my oil changed? Or is there something...


Which light comes on and chimes?
No there is no reset.
Let's first focus on which light is illuminated? The Check Engine Light or another light?
If the check engine light, have you had the trouble code read?

Jan 28, 2018 | Cars & Trucks

1 Answer

Our 2003 pt cruiser's oil light came on. the car


Low oil pressure turns on the light, not a low level of oil. You might have a serious problem.

Jan 07, 2010 | 2002 Chrysler PT Cruiser

1 Answer

Engine light comes on, stays on, doesn't blink,


The last chime is most likely an audible reminder that the check engine light is on. It would be advisable to get the car scanned to see why the light is on. Even if the car seems to be running ok, your fuel economy or emissions could be worse than they should be.

Jul 28, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Oil light keeps coming on and beeps


This is the pressure light, nothing to do with the oil needing to be being changed, you have low oil pressure being indicated, this will destroy the engine if the light is really indicating low oil pressure, have the oil pressure tested with a mechanical test guage at a shop, if the oil pressure is ok then replace the oil pressure light sending unit.

Nov 23, 2008 | 2001 Chrysler PT Cruiser

1 Answer

2004 PT Cruiser dome light doesn't work


If there is a switch on the dome light, that may be your problem. You would need to remove the assembly and check for voltage coming into the switch using a voltmeter with the door open.

May 30, 2017 | 2004 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15360 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...