Question about Mercury Cars & Trucks

Open Question

Replace valve cover gaskets on a1999 mercury marquis 4.6 engine

Valve covers are leaking

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: how to the replace the head cover gasket on 2001 hyundai elantra

Check this link, shouldn't be too bad.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528019703d

Posted on Dec 22, 2008

MrScary66613
  • 1990 Answers

SOURCE: oil leaking out of valve cover gasket

It is a Valve Cover Gasket. You can get a new one at any Auto Parts Store. To make this repair last longer, Do not get the Cheap one, Get a Felpro Gasket and it will Quadrupel the Gasket Life. Please Rate My Response! Thanks!

Posted on Jan 30, 2009

leetamara
  • 702 Answers

SOURCE: valve cover gasket leaking

When you buy the valve cover set, it will include the spark plug well "O" rings. Simply remove the valve cover and on the underside of the valve cover, you'll see the "O" rings that need replaced and you'll see exactly how the valve cover gasket itself fits.

Posted on Feb 12, 2009

  • 1 Answer

SOURCE: replace valve cover gasket

I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.

Posted on May 04, 2009

  • 61 Answers

SOURCE: how to replace valve cover gasket 1998 chevy malibu

The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air intake, loose wires etc.) Then you will need to remove your valve covers (using basic tools) and be very careful to not let anything get on your lifters, which your valve covers protect. Once you have the valve covers off compare the new gaskets to make sure they are the right size. Then remove the old gasket and replace with the new one using a high temp gasket sealant (available at any auto parts store) to attach the gasket to the valve covers. Then tighten down snug and check for leaks after replaced. 

Posted on May 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve cover leaks


Try replacing the valve cover gasket. If the valve cover gasket still leaks oil after replacement try adding standard 1/4 lock washers to the top of the valve cover bolts. I have a 2005 Suzuki Reno and had to replace the valve cover gasket several times. Adding the washers tightened the seal of the gasket and prevented any leaking,

Jan 13, 2014 | 2006 BMW 750Li

Tip

Simple steps to replace the Valve Cover Gaskets on a Jaguar XJ8?


Replace the valve cover gasket if the valve cover gaskets are leaking or if they're worn. The procedure is as follows:--
1)First carefully remove the nuts holding the valve cover to the engine head.2
2)Then pull the valve cover off from the engine head .
3)You can use flat-tip screwdriver to remove the valve cover.
4)It will be very dirty inside so you will have to clean the mating surfaces on both the engine head and the valve cover.
5)Take your time and clean it completely.

6)You can use a bead of RTV sealant on both mating surfaces.

7)Then carefully seat the gasket to top of the engine head.
8)The gasket can only be fitted in one way. So fit it properely.
9)Then tightly Press the valve cover to the gasket
10)And tighten the valve cover nuts secure.

This will help.Good Luck.

on Mar 10, 2010 | Jaguar XJ8 Cars & Trucks

1 Answer

Valve cover won't come off


Follow the detailed procedure mentioned in the link below to remove replace VALVE cover:----
Click the link below:---
VALVE COVER GASKET REMOVAL GUIDE http://technoanswers.blogspot.in/2012/06/valve-cover-gasket-removal-guide.html

-----------
For more help on these issues,check the link below:---
Car oil leaks from valve cover gasket? http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

--------
Lexus RX: Tapping noise under Valve Cover At Low RPM? http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html
---------- How to replace Timing Belt,Water pump And Valve Guides on Mitsubishi Montero http://repairhelpcenter.blogspot.com/2012/10/how-to-replace-timing-beltwater-pump.html

----------
2000 Toyota Solara: Valve Cover Gasket Replacing? http://technoanswers.blogspot.in/2012/04/2000-toyota-solara-valve-cover-gasket.html

----------
Valve Cover Keeps Cracking? http://schematicsdiagram.blogspot.in/2012/04/valve-cover-keeps-cracking.html

----------
These details will help.
Thanks.

Nov 23, 2012 | 2006 Subaru Forester

2 Answers

Which engine oil should i use for 88 grand marquis


Valvoline synthetic would be very good , or even valvoline 10w40 non-synthetic .

Oct 25, 2011 | 1988 Mercury Grand Marquis

1 Answer

Oil leak found in one out eight spark plugs we changed on a 2000 mercury grand marquis


If oil was found on outside of plug oil may be leaking from valve cover gasket and it should be replaced

Jan 07, 2011 | 2000 Mercury Grand Marquis

1 Answer

Recently replaced the spark plugs and discovered oil surrounding the outside of some of the plugs. Should this be?


this is not supposed to be, u must replace the valve cover gasket, the plug well seals are leaking

Jun 09, 2010 | 2002 Mercury Grand Marquis

2 Answers

How to replace starter +1993 Mercury Grand Marquis


disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,

May 08, 2010 | 1993 Mercury Grand Marquis

2 Answers

Changed the spark plugs and the old ones were covered in oil


i'm guessing that your car is a 4-cylinder. this is common for inline 4-cylinder engines. since the spark plug holes usually go through the valve cover, the valve cover gasket will leak and collect in the spark plug holes. to fix this you will have to replace the valve cover gasket.

Mar 23, 2010 | 2000 Saturn SW2

1 Answer

What is the labor time to replace valve cover gaskets on a 2003 mercury grand marquis?


I'm not sure what the labor time is but technically it doesnt take ALL that long. Besides removing a few parts to clear a way to the covers. I would assume somewhere around 3-5 hours is what you might get hit up for.

Jan 05, 2010 | 2003 Mercury Grand Marquis

1 Answer

Tiny oil leak from head gasket


Yes.

But is it the head or the valve cover leaking oil?

May 27, 2009 | 2000 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...