Question about 1985 Jeep Cherokee

Open Question

1985 jeep cherokee heater blower motor not working

Blower motor not working

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 116 Answers

SOURCE: 2004 jeep grand cherokee blower motor controller melted contacts

replace the switch and the plug end uf the harness.... do one wire at a time availabla from chrystler

Posted on Dec 31, 2008

Ad
r_mcalhoun
  • 166 Answers

SOURCE: 96 jeep cherokee fan blower motor not working

90 % of this problem is the blower resitors. they keep them it stock at most dealers

Posted on Apr 02, 2009

inhisname
  • 76 Answers

SOURCE: Heat/AC Blower fan speed only works on High

hello, this sounds like a bad blower motor resistor!! its cheap and easy to change..if you need more info on locations let me know,, good luck.....marty

Posted on May 27, 2009

  • 3640 Answers

SOURCE: how to replace 2006 Jeep Grand Cherokee fan Heater

the blower motor is under panel near glove box. remove connector then the 3 mounting screws that hold it in. if changing the motor, use old fan cage from blower to new one, remove retainer clip to take off of motor shaft. CARL,

Posted on Jan 20, 2010

Obertelli
  • 3006 Answers

SOURCE: i have a 1999 Jeep Wrangler and the heater fan

If you bypass the resistor pack and connect the motor directly to the fused 12v supply then the fan should run at maximum speed. If so, it's the resistor pack that's blown: a very common fault on a huge number of makes and models.

Posted on Feb 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 trailblazer blower not working


Are you saying the blower motor would run intermittently and then just stopped working? My first thought is faulty blower motor, I've seen faulty blower motors that would run intermittently. Any motor that uses brushes, you can tap on the motor to see if it will start working, that is a sign of bad motor brushes, replace the blower motor. There could be other issues?
Did you check the blower fuse, not only check the fuse, check the fuse circuit for voltage, use a test light. Check for applicable hvac trouble codes. With hvac on, check for voltage and ground at blower motor wiring connector, if both are good and no blower action, suspect the blower motor.
blower motor-ah4hlr42fk2bjlxp04hurvgv-3-0.jpg

May 13, 2017 | Cars & Trucks

1 Answer

98 buick heater stop working


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Dec 14, 2012 | 1998 Buick LeSabre

1 Answer

Sorry its blower



Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Dec 07, 2012 | 2006 Kia Sportage

1 Answer

My heater blowers dnt work and i need to knw where i can locate the resister blocks for my heater blowers so i can ghange them


Its located under dash,or near glove box.

The dash panel lower side has to be out.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Heater is not working


HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | 1988 Honda Accord 4 Door

1 Answer

Heater blower don't work


It can be faulty blower motor or faulty blower motor resistor.Get the blower motor inspected.If its faulty it has to be replaced.

=======
For blower motor testing and replacing,check the link below:----
Blower motor Testing/replacing for all vehicles? http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------
These will help.
Thanks.

Nov 25, 2012 | Cars & Trucks

2 Answers

Blower motor not working


Either its the resistor or the motor itself.


SUV Performance Parts

Nov 23, 2012 | 2006 GMC Canyon

1 Answer

2001 dodge caravan Ac comes on but will not blow ay any speed . I replaced blower motor resistor.


try tapping the bottom of the blower motor with the blower motor speed selector turned to high and the key on. If the blower motor starts working replace it.

Another thing you can try is unplugging the blower motor and supplying your own power and ground wires to the blower motor. It doesn't matter what pin on the blower motor you supply power or ground. It will work either way. If it doesn't than replace the blower motor. If it does you might have a bad control head.

You could also have a bad blower motor relay or blower motor fuse located in the underhood fuse block. There should be power at the dark blue wire at the blower motor with the key on and the fan speed set to any position.

here's a how to article I did on blower motor operation.

blower motor does not work

Nov 17, 2010 | 2001 Dodge Caravan

1 Answer

Blower motor


PART 1
If all blower speeds are not working I would check the blower, but if only one speed is not working I would check the resistor block for the blower it controls the speeds. they use 2 different blowers in this truck I have to sent a second message with the rest it will not hold it all inthis message.

2001–05 Models With Delphi Blower Motor
  1. If equipped, remove the sound insulator panel.
  2. Remove the blower motor insulating cover screws.
  3. Disconnect the electrical connector from the blower motor.
  4. Remove the blower motor insulating cover.
  5. Pull the retaining tab down while turning the blower motor counterclockwise in order to disengage the blower motor from the heater/ventilation module.
  6. Remove the blower motor.
c93043c.jpgPull the retaining tab down while turning the blower motor counterclockwise in order to disengage the blower motor

To install:
  1. Install the blower motor.
  2. Install the blower motor to the heater/ventilation module. Turn the blower assembly clockwise until the retaining tab locks into place.
  3. Install the blower motor insulating cover.
  4. Connect the electrical connector to the blower motor.
  5. Install the blower motor insulating cover screws.
    1. Tighten the screws to 14 inch lbs. (1.6 Nm).
  6. If equipped, install the sound insulator panel

Nov 27, 2008 | 2004 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...