Question about Cars & Trucks

Open Question

On my kia rio 5 why does the ignition coils keep blowing

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 35 Answers

SOURCE: Replace Ignition Coil - Kia Rio 2002

must dismantle all wires and battery...

Posted on Sep 24, 2008

Ad
  • 109 Answers

SOURCE: 2001 Kia Rio meter fuse keeps blowing

check for power and ground on fuse wires

Posted on Jun 24, 2009

AUTODOC01
  • 216 Answers

SOURCE: 2002 kia rio keeps on blowing out 10amp fuse. when

SOUNDS LIKE A SHORT COULD BE ANYWHER FROM ECM TO WIRING I WOULD TAKE IT TO A SHOP FOR 1-2 HR LABOR THEY CAN LOCATE THE PROBLEM ? MOST COMMON ARE WIRES RUBBED INTO IN HARNESS HIGH STRESS AREAS NEAR ENGINE, LOOK FOR WIRES TOUCHUNG OR FRAYED INSULATION ON THE WIRES GOOD LUCK

Posted on Aug 24, 2009

mamunszone
  • 24 Answers

SOURCE: 2000 kia rio keeps blowing rear/left, front/right

May short circuit in motor or motor wires,

Posted on Sep 29, 2009

  • 4 Answers

SOURCE: radio, ignition coil, antitheft and climate control fuses keep blowing

try looking for a short in the wiring harness and do they run to the same fuse

Posted on Feb 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace ignition coil on my 2011 Kia Rio 1.6l?


Step one: buy new ignition coil
Step two: find bad ignition coil
Step three: replace the coil.

Seriously it is this easy, once you buy the new part you know what to look for in your engine bay. disconnect the old one and reconnect the new one in the same way.

Dec 16, 2014 | 2011 Kia Rio

1 Answer

2009 KIA RIO


DID YOU REPLACE THE COILS AND PLUGS ??

May 17, 2014 | 2005 Kia Rio

1 Answer

2010 kia rio lx spark plug torque specificatons


Ignition coil hold down bolts are thin and could snap if over tightened. Just run the bolts down snug by hand and then give it 1/8 turn . Its just enough to keep the coils from vibrating loose.

Feb 14, 2014 | Cars & Trucks

1 Answer

Where is the coil pack located on a 2007 kia rio 1400cc engine


You don't have a "coil pack" or single ignition coil for the motor. You have individual ignition coils for each cylinder - see link here:

http://www.carpartswarehouse.com/viewpicture.asp?partid=32-70024%20%20&code=F4

Jun 08, 2012 | Kia Rio Cars & Trucks

1 Answer

99 Kia Sportage, meter fuse keeps blowing,


check your ignition switch or also your mass air flow hope this work

Aug 30, 2009 | 2004 Kia Rio

2 Answers

Kia Rio Died suddenly while Driving - Now will not start -


maybe your fuel pump stop working or a blown fuse for the fuel pump or ignition coil. First checked for blown fuses

Jul 24, 2009 | 2001 Kia Rio

1 Answer

How do i change the spark plugs on a 2003 kia rio


INSPECTION

1. Disconnect high-tension code from spark plug.
2. Remove the spark plug.
3. Connect the spark plug to a high tension code.
4. Hold the spark plug with insulated pliers 5~10mm from a ground.
5. Crank the engine and verify that there is a strong blue spark.
If there is no spark, inspect the following points.

Step Inspection Action

1 Check for good connection of ignition coil Yes Go to next stop.
No Repair or replace
2 Check if resistance of high-tension leads are OK Yes Go to next step.
No Replace
3 Check if the ignition coil is electrically charged
1) Ignition switch "ON"
2) Check if the engine coil (+) is electrically charged
Yes Go to next step
No Check the wire harness between ignition switch ignition coil and ECM
4 Check if resistance of ignition coil is OK
Resistance
Primary : 0.36~0.44Ω (at 68°F (20°C))
Secondary : 10.9~13.3kΩ (at 68°F (20°C)) Yes Go to next step
No Replace
5 Check if ECM is OK Yes
No Replace

REMOVAL

Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.

Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.

INSTALLATION

1. Install spark plug into cylinder head.

Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)

2. Reconnect high-tension leads.
3. Reconnect negative battery cable.

Jul 17, 2009 | 2002 Kia Rio

1 Answer

Replace Ignition Coil - Kia Rio 2002


must dismantle all wires and battery...

Sep 09, 2008 | 2002 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...