Question about Cars & Trucks

Open Question

Remove sump of a 1.6 ford ikon 2005 model - Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: HOW TO REMOVE SUMP ON ZETEC 1.6 FORD STAITIONWAGON ,98 MODEL

undo engine mounts and jack engine up a bit,cheaper to find a complete engine in scrapyard and change it if its endy.this is often cheaper than a repair

Posted on Apr 11, 2009

techbuster
  • 5081 Answers

SOURCE: removing a sump pan

you drain as much engine oil from them sump as you can by undoing the 13mm sump plug. you then undo all the bolts holding the sump onto the engine

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford ikon 1.6i lx 2005 modeltorque setting of acylinder head. how to do it.its a rocam engine


You must use new head bolts, these are one time "stretch to yield" bolts
Tighten cylinder head bolts in three stages in the sequence indicated

10--4--2--6--8

7--5--1--3--9

Tighten in the following stages
STAGE 1 ------------20 Nm 14.75 lb
STAGE 2--------------40 Nm 29.51 lb
STAGE 3 Turn head of bolt 90 degrees of rotation.

Aug 11, 2016 | 2005 Ford Ikon 1.6i

1 Answer

My ford icon 1.6i only accelerate at 2000 rpm and idel between. 0.900/1000rpm and use accessive fuel..pullaway is weak??


Problem with my Ford Ikon 1.6? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...
Jun 10, 2012 - The same problem presist on slow speed also. ... Still the problem presist on sudden acceleration and when we strart up in signals. .... Ford ikon 2002 clx 1.6i starting problems start quick on running can it be the starter?

Ford Ikon fuel consumption, miles per gallon or litres/ km ...

www.cfcr.eu/ford-ikon-fuel-consumption-miles-per-gallon-or-litres-km
Ford Ikon fuel consumption, miles per gallon or litres/ km ... How much fuelconsumed Ford Ikon 1.6 i, liters / 100 km or miles per gallon. Ford Ikon 1.6i it is a ...

Oct 24, 2015 | Ford Cars & Trucks

1 Answer

I have a ford ikon 1.3 clxi. Its engine goes off when I switch on AC. otherwise it runs very smoothly. Please advise.


you may have a problem with a vacuum leak that causes the car to go a pitch higher to take the load of the ac,get a carb spray and start the engine and as you spray you would hear a change in the engine,then you have to fix that leak

Apr 27, 2014 | 2005 Ford Ikon

1 Answer

How does one remove the sump from the Rocam engine of a 2005 Ford Bantam pickup?


    1.Loosen the wheel nuts on both front wheels
    2.Raise the front of the vehicle, both sides
    3.Removes the front wheels
    4.Remove the both side ball joint bolts and lift the suspension of the ball joint using a steel bar or similar,
    5.Remove both inner cv joints from the vehicle
    6.Remove the battery and the plastic battery housing;
    7.Remove the air intake pipe
    8.Drain the oil from the sump
    9.Remove the resonator from the gearbox, hydraulic hose from the gearbox, reverse gear switch, speedo cable.
    10.Remove the two bell housing bolts on the top (next to the cylinder head). Take one bolt to a local tools and hardware and source the exact thread bolt but buy bolts that are approx 5/6cm longer - buy 5 bolts to be safe. Replace the two bolts removed with the longer ones.
    11.Remove the starter motor and power cables;
    12.Remove the bolt above the starter motor and insert a long bolt here
    13.Next remove all bolts mounting the sump,
    14.At the back of the engine (side where the manifold is) remove all bolts and insert one long bolt. Note none of the long bolts should be mounted into the oil pan (sump).
    15.Use a support bar to support the engine and gearbox assembly (I made one using a steel pipe and bolted this onto the engine strut bolts;
    16.Using a 17 socket and long extension remove the gearbox mounting (3 nuts), Lower the gearbox side of the engine so that the mounting bolts clear the engine mounting;
    17.Insert a large screw driver or similar between the engine and gearbox assembly and separate them (note most gearbox will separate itself);
    18.You will notice a +/- 4 to 5 cm space between but the gearbox and engine is still joined together by the longer bolts.
    19.Using a long 8mm "t" socket as shown below, insert this between the fly wheel and onto the sump bolt (x2) and remove them. Using a normal 8mm spanner / socket remove all other sump bolts. The sump can now be removed from the vehicle.
    20.[Information for using a 8mm special tool: note that the Gedore 8mm or similar will not work between the fly wheel and sump]. I had bought a cheap small 8mm socket {it comes 8mm, 10mm and 12mm in a three way small socket - cost about R12} I cut off the 8mm from this and joined a long steel rod to it and also a handle which made is a "special" T socket spanner, similar to the image below.
    21.Install in reverse order as described above.

one-remove-sump-from-rocam-engine-2005-j5ekklqbg0r4og3swv24qsbc-4-0.png

May 13, 2013 | 2005 Ford Bantam 1.3i

1 Answer

I need to find a pin code for my ford cd stereo serial number m14790931


please im despatly need code for my Ford ikon amb 1.6. the car radio serial no: 328829060935
part no: 8a39-18c939-dc

model no: 14790935

Nov 12, 2012 | 2008 Ford Ikon 1.3i

2 Answers

Taking the sump off a 2005 1.6 beetle


cannot say i have done one but the golf and polo come off on the earlier models ,perhaps its a gearbox out and flywheel off job which means its a drop out the bottom the complete unit ,i just do not know sorry

Mar 02, 2012 | 2005 Volkswagen New Beetle

1 Answer

HOW TO REMOVE SUMP ON ZETEC 1.6 FORD STAITIONWAGON ,98 MODEL


undo engine mounts and jack engine up a bit,cheaper to find a complete engine in scrapyard and change it if its endy.this is often cheaper than a repair

Apr 11, 2009 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...