Question about 2009 Dodge Journey

Open Question

On the dash where the mileage is displayed it says gate. What is does that mean?

Instead of the mileage the word gate is displayed.

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 138 Answers

SOURCE: My dodge cummins has hard start problem

Not sure about your hard starting problem, but the Done in the odometer is the conclusion of the computer test. If you turned your key on and off 3 times, it activates the self-diagnosis and will show the codes of any problems you are having. If you are getting no codes, and just DONE, it's finding no problem.

Maybe a Dodge expert will pipe up and give you some ideas about the no-start. According to a quick google search, it seems your problem is relatively common.

Posted on Nov 07, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dash says gas cap

is the gas cap screwed on correctly ?

Jan 29, 2013 | 2007 Dodge Caliber 2.0

1 Answer

Display reads oil at 15%

You will have to reset the maintance light. Turn the key in the on position.( Not the crank position ) Push the trip meter button until you see the mileage reading. Now turn key off and with left hand hold in trip button. While holding in the button with left hand turn key to on position until you see dash lights. Hold button in until light starts to blink then after 4 blinks release button for 4 blinks then hold in again until light resets. If it doesn't work try trip A instead of mileage reading.

Apr 27, 2009 | 2006 Honda Accord

1 Answer

Reset the oil indicator on a 2000 Toyota Rav4?

while you have the odometer reading current total mileage turn the key on while holding down the black button that switches from trip odometer to total mileage and you will see dashes where the odometer numbers are displayed. hold down the button until all the dashes disappear. then the display will read zeros when complete

Apr 22, 2009 | Toyota RAV4 Cars & Trucks

1 Answer

Maintenance Required light came on & stayed on after oil change

I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
If you do NOT see the dashes, followed by the 5 zeros, start the entire procedure again, but start with the odometer set to TRIP "A". Some vehicles use Trip A instead of the ODO.

You do NOT START the vehicle at any time during the reset procedure.
If the engine starts, the procedure will not reset.

Apr 03, 2009 | 2007 Toyota FJ Cruiser

1 Answer

What is the gate open warning light mean

that means that your rear door isnt shut all the way or swith that sends the singnal to the dash light is bad.

Mar 07, 2009 | 1987 Dodge Caravan

1 Answer

CErr Displayed on dash

For the mileage display, it's probably just a service reminder. Does your mileage come up when you press the button once? Or try resetting by holding the button in for a few seconds. The cutting out could be time for a tune up, adjustment of your idle speed, new fuel filter, or leaking vacumm hoses. Those are the easiest places to start. Could also be low fuel pressure or emission system problems, but hopefully you won't have to go there. If check engine light isn't on, it probably isn't emissions.

Feb 26, 2009 | 1988 Volkswagen GTI

1 Answer

Dash will not display shifter position or mileage

It actually sounds like you have a cold or cracked solder joint or you have oxidation on your connector or socket to the display module. Unplug then plug in your display module several times to attempt to remove the oxidation and see if that helps.

Sep 02, 2017 | 1999 GMC Sierra

1 Answer

Oil change light

Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.

Jul 29, 2008 | 2004 Toyota Corolla

Not finding what you are looking for?
2009 Dodge Journey Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides