Question about 1995 Toyota Camry
Can I access from under the hood or do I need to crawl under the car to locate and replace the sensor? Thanks !
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
Posted on Aug 11, 2009
Firstly, ensure you have the required 'mixture' of coolant/water (must have required coolant).
Second, I would recommend you re-test all the cooling system sensors again (make sure they're within specifications), in case a new one is faulty.
Third, ensure the new thermostat was of the correct temp setting (they all differ), so that it opens at the required time. Most cooling systems operate within 90 - 100degC.
Fourth, make sure the radiator (and associated hoses) aren't blocked.
If your temp gauge is reading higher than normal, but NOT in the danger zone...then this can be considered normal (especially if you've replaced with new components) and nothing to be concerned about.
However, if the temp gauge IS in the danger zone....then this suggests the coolant is not flowing through the cooling system properly.
If all above components test ok, then it's possible your water pump may not be pumping enough volume.
Posted on Aug 16, 2009
Testimonial: "I appreciate your help...Maybe I should just relace the water pump, that would be the last thing that I would need to replace."
left side of engine compartment next to the air cleaner (between air filter box and firewall) bolted to inner fender
Posted on Jun 22, 2010
Follow the hose from the bottom of the radiator to the point where in reaches the engine block. That's where the thermostat is located and the Engine Coolant Temperature switch is there too.
Posted on Jul 09, 2010
Tips for a great answer:
Jul 07, 2014 | 1995 Toyota Camry
Jun 12, 2014 | 1995 Toyota Camry
Oct 17, 2011 | 1995 Toyota Camry
Apr 18, 2011 | Toyota Camry Cars & Trucks
Feb 27, 2010 | 1995 Toyota Camry
Nov 22, 2009 | 2009 Toyota Camry
Sep 30, 2009 | 1995 Toyota Camry
Jul 01, 2009 | 1995 Toyota Camry
May 31, 2009 | 1999 Toyota Camry
Mar 13, 2009 | 2006 Toyota Camry
49 people viewed this question
Usually answered in minutes!