Question about 1983 Chevrolet Caprice

Open Question

WHERE IS STARTER LOCATED ON 83 CAPRICE - 1983 Chevrolet Caprice

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mechanicm639
  • 253 Answers

SOURCE: steering column interchange 83 caprice and 84 Impala?

The column should work. If you have the same features. Cruise, tilt, dimmer and all on the column. Good Luck

Posted on May 22, 2009

ministock48
  • 258 Answers

SOURCE: how do i change the starter

the starter should come right out without taking the exhaust loose you may have to take a cover loose from aroud the starter at the transmission but you shouldn't have to mess with the ehaust at all

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do and change the electric control module 83 Chevy Caprice Classic


Not too difficult.
You just switch out the PROM which is a chip in the computer that transfers from one to the other.
The ECM should be behind the radio or glove box.
Be careful with the pins when you plug the harnesses in.

Mar 07, 2015 | 1983 Chevrolet Caprice

1 Answer

How to change a starter1994 Chevrolet Caprice 4.3L


diconnect battery jack up car, starter is located on passenger side of engine. disconnect wires to stater 1 lrage nut 1 small nut. then remove 2 starter bolts

Aug 02, 2012 | Chevrolet Caprice Cars & Trucks

1 Answer

Replace the starter, where is it located, what tools do i need


Underneath vehicle, right side (depending on engine). You'll need a suitable jack with jack stands, 8mm wrench to disconnect negative battery cable, 13mm wrench and/or socket with ratchet to remove main wires to starter, 7mm wrench to remove remote wire on starter, and a 15mm socket with ratchet and 6inch extension to remove starter-to-engine bolts (2). Good luck.

Aug 31, 2011 | 1994 Chevrolet Caprice Classic

2 Answers

Where is starter switch located on a 1995 chev caprice?


bottom rear of the engine at the transmission bell housing.

Feb 17, 2010 | 1995 Chevrolet Caprice

1 Answer

How do i change the starter in my 83 chevy caprice 305 without breaking studs on exhaust


the starter should come right out without taking the exhaust loose you may have to take a cover loose from aroud the starter at the transmission but you shouldn't have to mess with the ehaust at all

Nov 11, 2009 | 1983 Chevrolet Caprice

1 Answer

Steering column interchange 83 caprice and 84 Impala?


The column should work. If you have the same features. Cruise, tilt, dimmer and all on the column. Good Luck

May 22, 2009 | 1983 Chevrolet Caprice

2 Answers

My 1993 Chevy Caprice Wont Start


there are large fuses in the relay box it could be one of these located in the engine compartment

Mar 18, 2009 | 1993 Chevrolet Caprice

2 Answers

How to install a 1986 chevy capri starter?


The starter is located on the passenger side, right at the bellhousing for the transmission underneath the car. it is held in by 2 15mm bolts. make sure battery is disconnected before moving wires off of it, as it will zap you!. remove the wires from the solenoid on the starter, and make sure they match up correctly on the new one. bolt the new starter in with the bendix gear facing the flywheel. secure hardware, reconnect battery, and give it a test.

if the starter continues to run and does not disengage, quickly disconnect the battery, remove 2 bolts on starter, and place a shim.

you may need a shim if the starter wont line up with the flywheel correctly. any local parts house has these readily available.

Feb 27, 2009 | 1986 Chevrolet Caprice

1 Answer

Oil pressure sending unit 83 caprice


i believe it is back by the distributor at rear of engine

Oct 01, 2008 | 1983 Chevrolet Caprice

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...