Question about Cars & Trucks

Open Question

How to get the Tumblr out of ignition switch when the key is on the off position stuck in the off position

How to get the Tumblr out a 2000 Oldsmobile Alero when you finish in switch is on the off position

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2000 Oldsmobile Alero won't start

Does your keyless remote works? Good connection from battery (-) to ground (black cable)? Also the imobilizer can be faild sometimes (antitheft)

Posted on Feb 24, 2009

  • 118 Answers

SOURCE: 2000 oldsmobile alero key will not turn everytime

It needs a new switch

Posted on Sep 08, 2009

  • 4 Answers

SOURCE: mitsubishi galant 2004 key stuck in ignition

1st Remove Battery cable from Battery because the only time the air bags will deploy is when the key is in the ignition. I have tilt steering and when I put the steering wheel in the up most position. I came right out. But now it seems to stick more lately.

Posted on Jan 02, 2010

  • 5 Answers

SOURCE: speedometer on 2000 oldsmobile alero is stuck at

try physically pushing it back to zero then drive the car if noting happens the speedo is bad

Posted on Feb 09, 2010

  • 565 Answers

SOURCE: ignition switch to a 2001

no there is no lock position for the alero. if the key wont turn the key and or ignition cylinder may be worn out. try jiggling the key as you try to turn it. you may need to replace the ignition switch to repair this. when you do it will need to be programed to the vehicle. hope this helps

Posted on Jan 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 oldsmobile alero and I can't get sound out of my rear speakers good speakers and connection just no sound


OLDSMOBILE ALERO 2000 speakers - Sonic Electronix

www.sonicelectronix.com/oldsmobile-alero-2000-car-speakers.html
OLDSMOBILE ALERO 2000 speakers - find speakers that fit your ... sound. This size is capable of delivering exceptional mid-bass that can't be found in smaller ...

2001 Oldsmobile Alero Car Radio Stereo Audio Wiring ...

www.modifiedlife.com/2001-oldsmobile-alero-car-radio-stereo-audio-wi...
Easy Plug and Play Wiring Adapter. ... 2001 Oldsmobile Alero Car Radio Stereo Audio Wiring Diagram ... If you can't find your car audio wire diagram, car stereo wire diagram or car radio ... Right Rear Speaker Positive Wire (+): Dark Blue ... olds alero and I have replace the stock stereo and have found that the sound out put ...

Request a Oldsmobile Car Radio Stereo Wiring Diagram


Jan 21, 2016 | Oldsmobile Cars & Trucks

2 Answers

How to reset anti-theft on a 2000 alero


The security, antitheft or lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://www.diy-gm-security.com/

25627937-vycpj41x2iphfdmbx4v0vfed-3-0.jpg

Apr 04, 2015 | 2000 Oldsmobile Alero

1 Answer

I HAVE 2000 OLDSMOBILE ALERO THAT FIRES BUT WANT CRANK. IVE CHANGED THE COIL PACKS IGNITION SWITCH CRANK POSITION SENSOR AND I HAVE A NEW FUEL PUMP WHAT COULD BE THE PROBLEM?


pull one sparkplug and crank the engine to see if you are getting spark. then check to see if there is fuel getting to the injectors, without fuel and spark at the right time an engine won't run

Sep 20, 2014 | 2000 Oldsmobile Alero

1 Answer

Ignition switch to a 2001 oldsmobile alero will not turn when key is inserted to start vehicle. Steering wheel will not go to a locked position as it should when car is parked and key is removed. Key will...


no there is no lock position for the alero. if the key wont turn the key and or ignition cylinder may be worn out. try jiggling the key as you try to turn it. you may need to replace the ignition switch to repair this. when you do it will need to be programed to the vehicle. hope this helps

Jan 27, 2011 | 2000 Oldsmobile Alero

1 Answer

I just replaced the ignition switch and lock in my 2000 alero and now it starts and runs fine but the security light is on and stays on. How do I reset this security light?


TURN THE IGNITION SWITCH TO THE ON POSITION FOR 10 MINUTES WITH ENGINE OFF.UNTIL SECURITY TURNS ITSELF OFF.THEN TURN OFF IGNITION SWITCH WAIT 5 SECONDS.THEN START THE ENGINE.IF SECURITY STILL ON DEALERSHIP HAS TO FIX.

Jan 18, 2011 | 1999 Oldsmobile Alero

1 Answer

I have a 2000 Oldsmobile Alero. It will start but won't stay running. What could be the problem?


There are many things that can cause that symptom. The most common is the AntiTheft System locking out the fuel control due to a problem with the PassKey sensor in the Ignition Tumbler. If this is the case, your "SECURITY" light will be flashing when you turn the Ignition Switch to the "Run" position. It could also be a problem with the Instrument Panel Cluster (IPS) Oldsmobile had a big problem with these modules failing to communicate with the Engine Control Module (ECM). This results in the ECM locking out the injectors in the "Run" position. You will get start-stall-start-stall....

Jan 16, 2011 | 2000 Oldsmobile Alero

1 Answer

Resetchangeoillight


Oldsmobile Alero, 1998-03
Turn the ignition to the ON position, engine OFF. Press the RESET button and release. The CHANGE OIL indicator will start flashing. 2000-03
— Press and release the RESET button again. 1999 — Press and hold RESET button until audible chime is heard and then release.

Here's the link I used
http://www.synthetic-direct.ca/technical/reset_oil_service_light_olsmobile.htm

Feb 10, 2010 | 2000 Oldsmobile Alero

2 Answers

Frozen power window


I just fixed a frozen up one on a 2002 Alero, I removed the door panel, unbolted the motor and it had a lot of pressure on it. When re-installed with no preload, the window worked fine. I lubed the tracks with silicone spray just to be safe.

I've seen this many times over the years on GM windows and still can't explain why it happens. Perhaps holding the switch in the up position too long/?

Feb 25, 2009 | 2000 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...