Question about 2002 Kia Sportage

Open Question

Engine diagram camshaft sensor loc

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to find out what controls fuel injector pulse on a 2002 grand am 2.2 liter dohc for there isn't a cam sensor

The link (from shows where the camshaft position sensor is located (see the diagram for the 2.2L). Are you sure your engine doesn't have one?
Repair Guides Components Systems Camshaft Position Sensor AutoZone com

Aug 17, 2017 | Cars & Trucks

2 Answers

Diagram of where a camshaft sensor is on a dodge stratus 2.4L 4 cylinder

2003 model
not confirmed
crank angle sensor might be near the stater motor on the block



Jul 07, 2016 | Dodge Cars & Trucks

1 Answer

Do u have a diagram of a cam sensor for a 2001 ford taurus

Looks like this in the engine area if you have the 3.0L 2V engine:


Camshaft Position (CMP) sensor

This the 3.0L 4V engine:


Camshaft Position (CMP) sensor

This is the part from any parts store:

3.0L 2V

This is the 3.0L 4V


Jun 26, 2011 | 2001 Ford Taurus

1 Answer

Bad camshaft position sensor , i have a 2005 dodge ram 2500 5.7 gas truck , can't find it!

The camshaft sensor is located on the frontside of the engine, heres a diagram to help you locaye it. good day.johnjohn2_136.gif

Jun 25, 2011 | Dodge Ram 2500 Cars & Trucks

1 Answer

I own a 2004 accent with 122,000 km on it. Long story short, had to get a new head gasket put on, so rocker cover, cams, everything had to come off. Work was done and everything was put back together. I...

P0340 - Cam Timing

of a mistimed camshaft system (all must apply):
  1. Camshafts have previously been removed from the engine.
  2. Engine runs rough.
  3. Vehicle sets P0340 (camshaft sensor code).
  4. Camshaft sensor has been checked with a known, properly operating camshaft sensor.

The diagram in the manuals should show the timing marks on both cam gears to be on the blue timing chain links.


Mar 23, 2011 | Hyundai Motor 2004 Accent

3 Answers

I need to find a diagram of my motor(2.2 Liter)so I can find where the Camshaft sensor and the Crankshaft Sensor are. I need to replace them!!

on a 2-2 remove starter motor. disconnect sensor wiring,remove crankshaft mounting bolt and take out crank sensor. the sensor is located by the oil filter. as for the camshaft sensor, (the 2-2 is not equipped with a camshaft sensor)

Jan 29, 2010 | 1998 Chevrolet Cavalier

2 Answers

Replacing a camshaft position sensor on a 1998 cutlass

The cam sensor is integrated with the crank shaft sensor behind the crank shaft pulley. The 3.1 runs 2 crank sensors. the one behind the crankshaft pulley in integrated to act as a cam sensor. It has 2 sets on rings for that sensor, 1 is in use accustomed for the fuel timing
Good luck and hope this helps friend. 

Jul 14, 2009 | 1998 Oldsmobile Cutlass

Not finding what you are looking for?
2002 Kia Sportage Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

80531 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides