Question about 2000 Volkswagen Beetle
You have no communication with your ECM, it could be the ECM itself or a Can-bus wiring problem. You will have to check continuity on your CAN wiring from the ECM to the gateway, you will need wiring diagram. Should be able to find those on the internet or some parts stores offer them free
Posted on Feb 12, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens
Posted on Jul 12, 2009
I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.
Posted on Jul 23, 2009
Tips for a great answer:
Jan 18, 2018 | Volkswagen Polo Cars & Trucks
Jun 06, 2016 | 2008 Volkswagen Polo Classic
Jan 24, 2013 | 2012 Volkswagen Polo
Jul 27, 2017 | Cars & Trucks
Jul 18, 2012 | Cars & Trucks
Feb 13, 2010 | 1999 Volkswagen Golf
Dec 05, 2008 | 2008 Toyota Corolla
Sep 06, 2008 | 1992 Volkswagen Fox
Mar 03, 2017 | 2000 Volkswagen Beetle
118 people viewed this question
Usually answered in minutes!