Question about Honda Cars & Trucks

2 Answers

Causes cylinder misfire

1998 Honda CRV with 172,000 miles. Engine in perfect condition except this winter it generated a misfire code in cylinder 4. Compression tested (all fine) on all cylinders, spark plugs and wiring replaced, timing belt replaced, coil replaced. Only does it on first start in extremely cold temps. Once engine is warmed up engine light goes out. Only thing left is maybe the battery is getting low?

Posted by Anonymous on

  • Robert Wood Aug 12, 2017

    Can you feel a misfire ?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,656 Answers

A restricted injector can cause a more severe misfire at cold temps . Can you get someone to do an injector balance test on it ?

Posted on Aug 12, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 8,270 Answers

Could be injector or possibly intake gasket leak.
see misfire section at link below.
Do It Yourself Diagnosis and Repair

Posted on Aug 11, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 19 Answers

SOURCE: S10 pickup misifirng when light highway load

I had to rebuild my engine at 97000 miles cuz of low engine oil pressure and bad berrings

Posted on Jan 09, 2009

  • 14036 Answers

SOURCE: 2001 Galant ES-V6 DTC is P0304 - Cylinder #4 misfire

look for weak valve springs.

Posted on Jun 22, 2009

  • 412 Answers

SOURCE: 2004 Neon SXT cylinder misfire

TRY REPLACING THE CRANKSHAFT POSITION SENSOR..HAVE SEEN THESE CAUSE MISFIRES AND LOW VOLTAGE DTCS AS PCM THINKS VEHICLE IS NOT RUNNING..ALTERNATOR MAY NOT BE PUTTING OUT PROPERLY

Posted on Jul 07, 2009

  • 119 Answers

SOURCE: MISFIRING ON CYLINDER 1 VW POLO 1.4 3CYLINDER

I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.

Posted on Jul 23, 2009

roniecon
  • 6826 Answers

SOURCE: 2003 kia # 3 misfire/ runs rough

Replace the coil for number 3 cylinder.

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine misfires. Battery dead/fixed. Po303 code: Changed plugs/wires, code cleared/reappeared. Misfiring again. Po420 code/then cleared. Po306 code. Replaced coil tower. Misfired again..


You either have a bad catalytic converter causing too much back pressure or you are running rich. I think cylinder 3 and 6 are on the same side of the engine (except opposite banks) right? Locate the fuel pressure regulator. Is it on the same side? I've seen those go bad and allow fuel to be sucked into the vacuum line causing a rich condition/ misfire on two or three cylinders on that side of the engine.

Nov 13, 2015 | 2005 Dodge Caravan

1 Answer

Po 303 304 code 97 honda civic


You have done everything except touch on what is wrong . code p0303 refers to cylinder 3 misfire detected===causes ---engine mechanical fault---wiring---ignition/ furl system---injector---RCT/MAF sensor--ECM
code p0304 refers to cylinder 4 --misfire detected===causes -- same as po303
have a compression test done as there are two adjacent cylinders and it may be a head gasket problem

Jan 06, 2014 | 1999 Honda Civic

1 Answer

Missing,viborating


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The vibrating tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2009 Ford F-150

1 Answer

Vehicle missing,shaking,engine light comes on


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The shaking tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2004 Ford F150

2 Answers

After going over 40mph the check engine light goes on n it gives the code 440


How did you read that code on your car? A 92 Accord is supposed to give you pre-OBD honda codes, which are all below 100. Please check the code again and re-post it.

Jan 04, 2011 | 1992 Honda Accord

2 Answers

2000 honda crv p1399 and p0301 check engine codes


Code P1399 is specific to Honda - it is an error code for "multiple variable misfires detected". P0301-P0304 are common OBDC codes for all cars, specifically "misfire in cylinder X".

You will get the P0301-P0304 codes on your OBDC reader when you plug it in (if actually errors), but will only find the P1399 if you select Honda as the manufacturer.

Just got these errors today on my CRV 2000. Now I have to figure out what is causing two of the cylinders to misfire.

Mar 08, 2010 | 2000 Honda CR-V

1 Answer

2002 Ford Ranger check engine light indicating misfire


Code P0301
Ignition Coil Pack
Ignition Cable
Spark plug
Clog or dirty fuel injector
Evap canister purge valve
Engine Compression
fuel pressure

you have 3 type of engine for your truck
2.3L 4 cylinder
3.0L 6 Cylinder
4.0L 6 Cylinder

need to know that type Engine

The reason why the service light come on because it is a hard code
not a soft code.

Let me know

Sep 20, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

76 P0306 Misfire Cyl. 6 Or Random Misfire


hi my name is mark, to reset that all you do is pull positve cable off battery and that will reset the ecm. you might check your plug wires for loose connections.

Mar 16, 2009 | 1998 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...