Question about 1999 Chevrolet Blazer

1 Answer

99 chev blazer drivers window switch got a little rain water in it. the drivers window quit working, all the rest operate fine.I replaced the 5 switch control panel located on the arm rest. now not only does the window not work but the door locks switch doesn't work. I put the old switch back in and the door locks work like before but still no window. question is it possible the new switch I put in is faulty?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 21,873 Answers

Could be, or a wiring problem in the harness. I would check the harness for power and ground with a meter.

Posted on Feb 11, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 59 Answers

SOURCE: power windows/ door locks

you might have left your window cracked and it rained on it, or it could have gone out on its own but it is definately the master control switch, on drivers door needs replacing. hope it helped you.

Posted on Dec 22, 2008

co7196
  • 3433 Answers

SOURCE: 98 chevy blazer power window issue

sugest fuse ck 1st thing. Master bypasses individual controls. Power supply to rear windows is interupted. Ck for connevtor under front seats. Fuse may be labrled accessory or per win.

Posted on May 12, 2009

  • 14 Answers

SOURCE: driver door auto--locks, windows, etc. not working. all other doors working

cable probably became disconnected in door..

Posted on Jun 16, 2009

  • 1 Answer

SOURCE: door locks and power window

Just did this procedure I got from coloradofans.com forums:

"any type of power/voltage change seems to trigger this issue

The most common symptom is power locks fail and only the driver window quits, however that is on the extended cab.

Steps to fix and it works every time.

take door panel off driver's door
Disconnect the wiring attached to window and power lock control unit
disconnect battery cables
connect the negative to the positive cable(((NO BATTERY CONNECTED)))
This will act to short residual voltage in the system

5 minutes later
place the key in the ignition and turn to the run position
connect the wiring to the window/lock controller
connect the negative cable to the battery
then the positive
open drivers side door
turn key to the off position((do not remove yet)) you should get a series of dings through speakers telling you the key is still in the ignition
once it begins dinging pull the key out and you should hear the door lock solenoids trigger and the windows should work." - Coloradofans.com forums

Posted on Mar 20, 2010

  • 270 Answers

SOURCE: i have a 2006 chevy trail blazer, the drivers side

Problems WithChevy TrailBlazers
ElectricalProblems
Some of the mostcommon problems with the TrailBlazer involve the vehicle's electrical systemand accessories. Many drivers have experienced problems with the dashboardgauges, including the fuel gauge, speedometer and "check engine"warning light. Additional electrical problems include power automatic doorlocks and windows that fail to work or operate intermittently. These problemscan be difficult to diagnose as they can result from anything from a faultybattery to problems with the wiring or other electrical components.
Read more: Problems With Chevy TrailBlazers ' eHow.com
A fuse contains a thin metal bridge between two terminals. When too muchelectrical current is drawn through the fuse the bridge melts, breaking thecircuit. This feature prevents damage to electrical components and limits thepossibility of a fire.The Chevrolet Blazer utilizes small fuses to protect thevehicle's wiring harness from overload. These are typically plug-in blades, notthe glass-barrel fuses used in older vehicles.
Location The fuse panel ona Chevy Blazer is located on the driver's side of the firewall beneath thedashboard. Some later models may be equipped with a fuse panel cover. To removethe cover, pull the retaining clips loose on each side and lift the cover fromthe panel. Replacing a Fuse Locatethe fuse you believe is burned out by its label or use the owner's manual as aguide. To remove the fuse, you may need needle-nose pliers; don't put too muchpressure on the fuse or you could crack the casing. Examine the thin metalstrip between the two terminals. If it is broken, scorched or deformed, it mustbe replaced. Read more: Fuse Box Instructions for a Chevy Blazer ' eHow.com

Posted on Nov 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford ranger elec window switch wont work for either window but pass side does work for that side


Replace your Driver side switch. It obviously has become corroded or shorted out from moisture. This happens a lot when people forget to put their windows up before a rain.

Mar 23, 2015 | 2004 Ford Ranger

2 Answers

1999 Toyota Camry intermittent window will not go up and down


On the actuating motor their is a small solenoid switch that needs to be sprayed with an electrical contact cleaner. It is also a thermal switch that will shut off power if something is binding the closing or opening of the window, and will come back on after about three minutes after it cools down.The best check is to slam the door pretty hard and see if that makes it work. That will pinpoint the problem as being in the door.

Sep 19, 2014 | 1999 Toyota Camry

1 Answer

Back defrost on 99 chev blazer not working


Has the rear glass been replaced? The wires to the glass are notorious for breaking near the upper most point of the hatch where the hatch opens and the harness flexes between the body and the hatch every time you open it.

Mar 27, 2014 | Chevrolet Blazer Cars & Trucks

1 Answer

98 Chev Blazer. power lock problem. driver's door would not unlock doors, now it will not lock doors. passenger side works fine


you may just have a bad connection under the lock button under switch panel on your drivers door. check electrical plug in at door lock switch by removing that panel from driver door.it may be that you have to replace that door lock switch .thers only one fuse for door locks and if pass side works, it's not blown.

Aug 19, 2010 | 2001 Chevrolet Blazer

1 Answer

Driver side power window won't go up on 99 chevy blazer


bad switch or motor
To check the motor the motor has two connections. One for up and one for down. Try hot wiring the connections to check. If it works the drivers switch is bad

Apr 30, 2010 | 1999 Chevrolet Blazer

1 Answer

1996 Chev Blazer-water in driver's side floor board


its caused by your aircon the hose may leaking under your dash board

Jan 29, 2010 | 1996 Chevrolet Blazer

1 Answer

Drivers side window won't roll up


check for power at that window motor plug behind door panel while operating window switch. No power? replace window switch. Have power? replace motor.

Nov 28, 2009 | 2006 Dodge Stratus

1 Answer

The front pilot window don't work. Don't respond at all. The others windows works fine. How do you change the fuse?


not fuse, if others work. hit on drivers door panel under arm rest while working switch. usually motors bad for window in door

Aug 17, 2009 | 1999 Chevrolet Blazer

2 Answers

Driver's side window will not roll up. All other windows work fine. Help


replace window regulater and moter...after you chech for power inside door on the plug in at window motor with a circuit tester...

Aug 09, 2009 | 2000 Chevrolet Blazer

1 Answer

98 chevy blazer power window issue


sugest fuse ck 1st thing. Master bypasses individual controls. Power supply to rear windows is interupted. Ck for connevtor under front seats. Fuse may be labrled accessory or per win.

May 12, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...