Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pretty har to say at this point, help me by telling what u checked and how u checked it. What engine is in the car?
The no spark issue could be any of the following: distributor, dist. cap, rotor, plug wires, spark plugs and engine coil.
Check the engine coil to make sure it isn't cracked, u can easily find it by following the center plug wire from the distributor cap.
I am not the most familiar with chrysler products myself, though i used to be a mechanic. I will look into this for you, but until i find a more precise answer, i am inclined to say it is the engine coil. I will get back to u very soon.
How did this problem occur? Did u come home one night and then car never restarted or did it stall somewhere as u were driving?
What i'm really interested in is knowing how you checked the engine spark.
Posted on Nov 19, 2008
for the most part it is under the hood of your car where the sticker say engine size try this website to see if they have you car listed its www.autozone.com if not call your local part store and tell them its a 4.0 liter and you need the gap on the spark plugs
Posted on Apr 20, 2009
SOURCE: plymouth breeze
Yes, I had this on my 97 Stratus....could be a couple of things....one, the there may be damage to the wire connector harness going to that sensor. That was the problem with mine. I replaced the cam sensor, crank sensor, coil pack, mas sensor..etc...it ended up being a burnt spot on the wire harness. They said this is a common problem for the stratus/breeze/cirrus/intrepid.....the most it could be is a bad ECM....there is a bad pin on it located half way down the side where the big connector is. It is the silver block with the big wire harness going to it in the engine compartment. Try wiggling that around...the harness area.
Posted on Jan 19, 2010
Testimonial: "thnk u for the quick response, this is very help ful. it gives me confidence in what i thought "
Tips for a great answer:
Feb 28, 2015 | 1997 Plymouth Breeze
Feb 11, 2014 | 1997 Plymouth Breeze
Oct 07, 2011 | 1997 Plymouth Voyager
Jun 19, 2011 | 1997 Plymouth Breeze
May 01, 2010 | 1997 Plymouth Breeze
Oct 06, 2009 | 1998 Plymouth Breeze
Sep 17, 2009 | 1997 Plymouth Breeze
Sep 04, 2008 | 1997 Plymouth Breeze
Jun 24, 2008 | 1997 Plymouth Breeze
17 people viewed this question
Usually answered in minutes!