Question about Cars & Trucks

Open Question

My nissan primastar is missing in 4th gear - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: Engine is missing when in 4th-5th gear

try having the fuel filter changed first and have the timing checked and I don't know how many miles on the truck but check low or uneven cylinder compression pressure remove spark plugs and test the compression with a gauge but before doing all this it could be a weak or faulty ignition system

Posted on Jan 09, 2009

rey12312
  • 36 Answers

SOURCE: i have a nissan nivara d22 missing in 3rd n 4th gear

NEED TO REPAIR

Posted on Aug 08, 2009

SOURCE: nissan primastar clutch

If there is no free play on the clutch pedal that mean the clutch disc have gone ,or adjust the clutch pedal.

Posted on Mar 04, 2010

  • 279 Answers

SOURCE: 06 nissan primastar i can select

This sounds like your clutch plate is no longer making contact,or it has worn to a point where it just slips.You are going to have to take it in to a tranny shop and have it looked at or if you are handy start dropping the tranny out yourself.Replace the clutch and the throw-out bearing at the same time.No one will know for sure whats wrong untill they get into it.Good Luck

Posted on Oct 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Pontiac Bonneville GXP will not shift into 4th gear I was to it was a fourth gear band but is that the only problem that will cause itI'notto shift into 4th gear


Which transmission does yours have 4T65-E or 4T80-E ?

4T80-E
No Fourth Gear

Checks

Causes

1-2 Shift Solenoid Valve
?€¢
Inoperative
?€¢
Debris
?€¢
Pinched wires

3-4 Shift Valve Bore Plug

Misassembled

4th Band

Burned, slipping, missing

4th Servo Cover

Cracked

4th Servo Pin

Broken, seized

4th Servo Piston

Damaged

4th Servo Seals

Rolled, cut or damaged
4T65-E
Slipping or No Fourth Gear
Slipping or No Fourth Gear Checks
Cause

DEFINITION: A large engine RPM increase is noted in fourth gear, Drive range, with little or no vehicle forward speed increase. First, second, and third gear operation are normal. Shifts into fourth gear are soft or do not occur. Fourth gear ratio is 0.705:1.

Automatic Transmission Fluid Level
Low fluid level

Transmission Main Line Pressure
Low transmission main line pressure

Oil Filter Assembly
• The oil filter assembly (100) is missing, plugged, or damaged.
• The oil filter seal assembly (101) is missing or is damaged.

Control Valve Body Assembly
• The 3-4 shift valve (362) or the 4-3 manual downshift valve (360) is stuck or binding.
• Debris is found in the passages of the control valve body (301) or of the control valve body spacer plate and gasket assembly (396)

Case Cover Assembly
Distortion or damage occurs at the manual valve (404) or at the case cover (401), causing PRN oil leak.

Driven Sprocket Support Assembly
A plugged third clutch oil passage in the driven sprocket support assembly (609)

Fourth Clutch Assembly
• The clutch plates (500-502) are worn, damaged, or misassembled.
• A missing or not seated fourth clutch spring retaining ring (601)
• A damaged spring assembly (602) or piston (603)
• Worn or damaged fourth clutch piston seals (604, 605)

Third Clutch Sprag Assembly
• The sprag (720) was misassembled or backwards on the inner race (661).
• A damaged third clutch sprag assembly (653, 661, 719-721)

Dec 06, 2015 | Pontiac Cars & Trucks

1 Answer

I have a 1996 Nissan XE pickup 2.4l.4cyl,4×4 5-speed. It grinds in all gears,even reverse except for 4th gear.. What's up???


if 4th gear is the only gear not grinding then there is a problem in the counter shaft bearings in the box
in reality there is no 4th "gear" as it is a straight through connection of the input and out put shafts and there is no load placed on the counter shaft set bearings

Apr 28, 2015 | Nissan Cars & Trucks

1 Answer

Nissan primastar hazard lights flashing for no reason


The switch is not catching, replacement is simple. two torx screws each side of the bottom of gear stick shroud, pop off the shroud and push switch from inside. Replace in reverse order.

Dec 11, 2013 | Daewoo Korando Cars & Trucks

1 Answer

Hi having problems starting my primastar in the mornings .i have to pull star it .its as if its not getting diesil i got new glow plugs put in but still no joy


turn the key on my nissan primastar 07, no glow plug light comes up on the dash, result the engine turns over fine but it won't start any suggestions

Dec 15, 2010 | Nissan Pickup Cars & Trucks

1 Answer

Nissan primastar.heater direction control stuck.when control knob is turned it springs back.


you need a new cable for the heater controle about £6 on ebay it is a common problem and is changed in about 5 mins you will need a torax driver to fit your dash cover to remove the part of the dash covering the gear leaver / hazard switch

Oct 22, 2010 | 2005 Nissan Maxima

1 Answer

06 nissan primastar i can select any gear but when i let my foot off the clutch nothing happens,this happened during driving,


This sounds like your clutch plate is no longer making contact,or it has worn to a point where it just slips.You are going to have to take it in to a tranny shop and have it looked at or if you are handy start dropping the tranny out yourself.Replace the clutch and the throw-out bearing at the same time.No one will know for sure whats wrong untill they get into it.Good Luck

Oct 18, 2010 | Nissan Pickup Cars & Trucks

1 Answer

Hi i drive a 05 nissan primastar when started cold it takes a few seconds for revs to build up also when taking off in 1st gear it slow to build up power. To get a good take off i have to rev fairly high...


I also have the same problem has to be start in first gear and then no power for ages till the turbo warm up. Had you any luck with getting your problem fixed??

Jul 06, 2010 | Cars & Trucks

2 Answers

Nissan primastar clutch


If there is no free play on the clutch pedal that mean the clutch disc have gone ,or adjust the clutch pedal.

Mar 02, 2010 | 1994 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...