Question about Nissan Z
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove steering column shroud(cover)and tap ignition barrel with small hammer while twisting key backwards and forwards,also turn steering wheel backwards and forwards sometimes this is enough to release key as the locking pins in barrel and the steering lock pin do sometimes jam.You will have to remove steering column shroud to replace ignition barrel if tapping/hitting it doesnt work anyway so its not a wasted effort.Good luck,let me know how it works out
Posted on Nov 12, 2008
Did u try turning the steering wheel slightly in either direction? The steering wheel can 'jam' causing the key to seem stuck in the ignition. Simply turning the steering wheel a bit relieves the pressure and the key will turn. Let me know if this works for u
Posted on Nov 29, 2008
well to get the key out all you need to do is takeWD-40 and put the small hose on it as far as you can down the ignition the spay it and wiggle the key UP AN DOWN then take a sewing needle and wiggle it around in the ignition som anything holdin the key in there will come loose. TRUST ME I HAD THE SAME PROBLEM WITH MY 2006 SILVERADO
Posted on Jan 18, 2009
If I understand, the key will not rotate to all of the normal positions? If this is true, then I would guess that the trani didn't fully return to the park position please verify, You can check the ignition switch(the one that is half way down the steering column) for defects. Is there any binding, does the rotate freely? Thank you; good luck.
Posted on Apr 25, 2009
You need to push the car into Park harder and the key will pop right out :) even if it is off just push the gear in harder..
Posted on Jun 15, 2009
Tips for a great answer:
Nov 28, 2016 | Nissan Cars & Trucks
Nov 06, 2015 | 2006 Mercury Milan
Sep 15, 2015 | 2001 Nissan Sentra
Feb 12, 2015 | Nissan Hardbody Cars & Trucks
Nov 13, 2013 | Cars & Trucks
Sep 06, 2011 | 1993 Nissan Pickup
Aug 05, 2011 | 2005 Chevrolet Monte Carlo
Dec 27, 2009 | 2007 Chevrolet Cobalt Coupe
Nov 07, 2009 | 1999 Nissan Altima
Feb 05, 2009 | Nissan Z Cars & Trucks
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: