Question about 2007 Toyota Camry
Hybrid or not?
lost the oper. guide?
car has 2 trans. (3rd id m/T)
Id call Toy and ask, why guess?
i logged in to alldata.com
and looked at TSBs, and there is a tranny TSB.
here it is
DATA: (mostly EPA bs)
WORLD STANDARD AUTOMATIC TRANSMISSION FLUID
June 28, 2007
Page 2 of 2
100,000 Maintenance Interval - Inspection only; ATF-WS does NOT require any
flushing or changing during the life of the vehicle.
The use of Genuine Toyota ATF-WS is recommended.
The use of additives or aftermarket fluids that are considered compatible
or substitutes may result in shift concerns and damage to the internal
ATF-WS is NOT compatible with T-IV or Dexron ATF.
Containers storing Toyota ATF-WS should
be sealed - If exposed to the
atmosphere, ATF-WS may absorb moisture and potentially cause shift concerns if
used in operation.
One time use only.
When performing repairs on ATF-WS equipped transaxles, it is important to use
ATF-WS when refilling the ATM.
ATF-WS equipped ATMs may use the overflow type procedure - Any fluid
drained from the overflow plug should be discarded following proper local
regulations and never reused. Failure to do so could result in shift concerns and
damage to the internal transmission components.
Posted on Feb 23, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Hello. A vibration in the steerign wheel indicates an issue with the front tires. They are either out of balance, and would need to be rebalanced, or it is possible (although remotely) that the tire(s) may be compromised (after hitting a pothole), the belts in the tire may be corrupted. What I would suggest is to take the car to a reputable tire place, and get the balance checked. While the tire is on the balancer, the Tech will be able to see if the tire is out-of-round due to possible road damage. Probably just a tire balance problem. Thanks for choosing FixYA for assistance.
Posted on Feb 03, 2009
Push and hold trip button on dash with key off, turn key on but don't start, odometer will clock down, when it is finished, lite will go off
Posted on Apr 08, 2009
most likely a defect. call the dealer and see if toyota has issued a recall on the visor and you might have it replaced for free. other than that, there's always the junkyard.
Posted on Aug 12, 2009
Tips for a great answer:
Oct 21, 2016 | Toyota Cars & Trucks
Oct 21, 2015 | 2008 Toyota Highlander
Feb 24, 2015 | 2007 Toyota Camry
Apr 07, 2012 | 1992 Toyota Pickup
Jan 15, 2011 | 2007 Toyota Camry
Jul 12, 2009 | 2002 Toyota Camry
May 19, 2009 | 1993 Toyota Camry V6
Apr 01, 2009 | 2007 Toyota Camry
178 people viewed this question
Usually answered in minutes!