Question about 2006 Mazda 3

Open Question

What is fault code C3800

My car looses power when it is hot mazda 3

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car looses power, bogs down check engine flashes rapidly. No acceleration, then 15 - 30 seconds later power comes back and check engine light goes solid and stays on for 2 or 3 days.Anyone with idea?


You should read check engine code.
It tells you more than you can guess.
You can buy quality $1000 snap-on OBD scanner or $30 cheap one.
$30 will do good job. (you need to google after car tells you error code because cheap scanner shows only code but not meanings in plain English)

or you can visit local autozone and ask them read code for free.
unless you ask car itself, nobody will be accurate.

Dec 02, 2015 | 2003 Mazda Protege

1 Answer

Hi I have a 93 2.0 v6 mazda lantis. seems to have power surges when I'm driving(doesn't cut of though) and lack of engine power. any ideas please? ?


run the fault codes.problems may be from faulty sensors in the exhaust system, low fuel pressure, venting problems in the tank,loose connections to the ECM or MAP/MAF/VAF sensor problems

Feb 10, 2015 | Mazda Cars & Trucks

1 Answer

Misfiring


code p0303 refers to cyl 3 misfire detected ===causes engine mechanical fault--wiring--ignition/fuel system--injector--ECT/MAF sensor--ECM
code p0316 refers to misfire detected during start up --first 1000 revs===causes --engine mechanical fault--wiring--ignition/furl system--injector
the common fault cause is ignition/ fuel system and injectors so I would be checking fuel pressure and injector systems for clean and wiring connections are good especially on no 3 injector.

Apr 19, 2014 | Mazda 626 Cars & Trucks

1 Answer

My mazda323 has no power when moving on gear 2 but when in gear 3 it sudenly accellerate


run fault codes and check for accelerator position sensor fault.

Jan 07, 2014 | Mazda Cars & Trucks

1 Answer

I have only 36,000 miles on my 2004 mazda 3 hatchback and the engine light just came on. What does it mean?


IT MEANS THAT ONE OR MORE OF ABOUT 200 FAULTS HAS OCCURED IN THE ENGINE OR THE EMISSION CONTROL SYSTEMS, AT THIS POINT U WILL NEED TO HAVE THE SYSTEM TESTED FOR FAULT CODES, KRAGEN AND AUTOZONE DO THIS CODE TEST FOR FREE, FIND OUT THE CODES AND WRITE THEM DOWM THEN POST THEM BACK ON THIS THREAD FOR ME TO LOOK AT AND GIVE U SOME IDEA OF THE PROBLEEMS U HAVE TO FIX

Apr 06, 2010 | 2004 Mazda 3

Not finding what you are looking for?
2006 Mazda 3 Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...