Question about Isuzu i-370

Open Question

When HSA is ON , vehicle cannot go forward, what has caused this?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It's not moving forwards only reverse, the forward red light is blinking.


not even knowing what vehicle
no forward means
put it on a tow truck to a workshop to sort that out

vehicle will have fault codes to find which sensor or module is the cause

May 30, 2016 | Cars & Trucks

1 Answer

What causes Jimmy transmission to slip in forward gears, but OK in reverse


If your fluid level is right you may have a bad transmission. you need to talk to a mechanic.

Mar 22, 2014 | 1994 GMC Jimmy

1 Answer

When you apply brakes the vehicle stops then lunges forward


your brake pads could be low and this causing this issue... Replace the pads.. There should be about 1 CM of "meat" on both the inner and outer pad

Jan 20, 2014 | 2004 Ford Explorer Sport Trac

1 Answer

MY 2000 SATURN LS WITH THE 2.2 ENGINE HSA NO SPARK WHEN TRYING TO START


there could be few reasons of cause spark failure.
1. timing belt broken 2. crank sensor failure 3. cam sensor failure 4. coil failure

Feb 11, 2011 | 2000 Saturn Ls 4dr Sedan

2 Answers

When and how to apply HSA


hsa means HILL START AID. hsa is standard on isuzu's npr and nqr models fitted with manual transmission. hsa maintain truck-brake pressure until the clutch is engaged and limit vehicle roll-back. it is very effective for take-off on hills under load condition.

Feb 02, 2011 | Isuzu i-370 Cars & Trucks

1 Answer

2005 ford 4x4 6.0 ltr. diesel-5r110w trans.


We have a 2005 Ford 350 with a 6.0 engine that only makes 4 MPG . What sugestions Please > mrcox@sasktel.net

Jul 28, 2010 | 2005 Ford F 350 Super Duty

1 Answer

2002 ford expedition stuck in park the gear shift would not come out of park


replace the neutral safety switch or also try rocking the vehicle forward and back and then trying the shifter again.if it is parked tight against a curb and had rolled forward just a little bit and came to rest with the vehicles weight against one tire this will cause a bind and won't let it out of park this is especially true of 4x4 vehicles as the mileages get hire I hope this helps and good luck

Jun 21, 2010 | 2001 Ford Expedition

1 Answer

The car will start but after it's been running if you cut it off it will not re-start,has coolant,I use lucas oil injection cleaner,hsa new hose


This is typically a problem with the fuel pump relay. When you drive the vehicle, the electrical contacts get hot, and over time they build up with burned deposits of dust, dirt, etc. When you start the car initially, there is electrical contact because the deposits are cold; but when the build-up warms up, it can prevent electrical contact on restart. Replace the relay, and see how it works out. Hope this helps you.

Dec 02, 2009 | 2002 Volvo S80

1 Answer

Power drivers seat does not move forward and backward


if thare is a clicking sound heard then the fuse is not blown so this means ether the seat motor or transmission has gone bad and you half to replace the hole seat track, cause i dont think servisable parts are available for this vehicle

May 03, 2009 | 2003 Mercury Sable

1 Answer

My speedo in my fto mivec as stopped working is it a easy repair?


If you have a speedo convertor/delimiter chip fitted (UK market mph) this is often the cause.

Feb 22, 2009 | 1995 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...