Question about 2007 Chrysler Sebring 2.4

1 Answer

Tail lights and dash board is not working

Dashboard flashes 5 times and goes out completely until u turn switch on and it flashes again and the deck stays on all the time [trunk warning} even when car is off and when u press brake pedal it goes off

Posted by on

  • hotrodbear19
    hotrodbear19 Feb 11, 2014

    checked all fuses and they are good even changed switch and still same problem

  • hotrodbear19
    hotrodbear19 Feb 11, 2014

    we had cold weather this past months and after all of it that is when this started

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Chrysler Expert
  • 189 Answers

If its just the cluster flashing chanses are it needs to be sent out for repair but try diconecting the battery for a bit then reconect it and see if any thing changes also check and see if teh battery is good low voltage can cause strange things to hapen

Posted on Feb 28, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 51 Answers

SOURCE: brake and ABS warning lights on, trac off on.

You may have a bad abs controller. You need to get the code for the abs light from a shop or auto parts store.

Posted on Oct 08, 2008

junit80
  • 81 Answers

SOURCE: 2006 pt cruiser, dash lights and tail lights don't work

check the fuses.

Posted on Jun 25, 2009

  • 1 Answer

SOURCE: dash board lights on grand voyager flashing when

the controls always click when you change the setting as it is electronic, don't panic, but you should ask your ex as he is well up in voyager' s and the back seat not folding down properly!!!!!

Posted on Oct 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail and dash lights are not working


check the ground and look for the body modual water could have gotenin the conector

Feb 11, 2014 | 2007 Chrysler Sebring 2.4

1 Answer

1983 chevy caprice classic my dashboard lights dont work and also the clock stops working when i turn the lights on


Probably bad ground in the dash circuitry. You'll have to pull it out and check all the connections. Big job.

May 06, 2012 | Chevrolet Caprice Cars & Trucks

1 Answer

My dash bored wont stay lite at night with my lights on in my 1992 Buick


There are few help links provided to resolve this issue of dash board light not working.Click the link below to go through its procedure:-----Dash board lights not working? http://repairhelpcenter.blogspot.in/2012/02/dash-board-lights-not-working-on-gmc.html
----------- light in the dash blinks? http://repairhelpcenter.blogspot.com/2012/01/overdrive-light-in-dash-blinks.html
-----------Orange O/D warning light flashing on dash? http://repairhelpcenter.blogspot.com/2012/01/orange-od-warning-light-flashing-on.html
---------gauge on the dash quit working on? http://technoanswers.blogspot.com/2012/01/temperature-gauge-on-dash-quit-working.html---------No 4x4 light on dash? http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html
----------Digital Dash Display not working? http://schematicsdiagram.blogspot.com/2011/12/cadillac-seville-digital-dash-display.html
---------warning on dash and alarm sounds? http://schematicsdiagram.blogspot.com/2011/12/chevrolet-tahoe-hood-open-warning-on.html
---------Light Stays On dash of car? http://schematicsdiagram.blogspot.com/2011/06/brake-indicator-light-stays-on-dash-of.html
----------The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html
----------warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html
---------light bulb under dash replacement?

http://schematicsdiagram.blogspot.com/2011/12/heating-knob-light-bulb-under-dash.html

----------

Parking lights, tail lights and dash lights not working? http://technoanswers.blogspot.com/2012/01/parking-lightstail-lights-and-dash.html

---------

How to replace Instrument panel and dashboard?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-instrument-panel-and.html

-------

Tail lights and dash light fuse keeps blowing? http://technoanswers.blogspot.in/2012/02/tail-lights-and-dash-light-fuse-keeps.html

---------

This will help.

Thanks.

Feb 19, 2012 | 1992 Buick Century

2 Answers

How do i fix my dashboard lights on my 1986 chevy nova?


Turn the light switch on and check your tail lights. Back then the tail and dash lights work on the same circuit inside the headlight switch so if one was out so was the other. If this is the case you need a new headlight switch. If not, there should be a fuse in your panel marked "instr". that's for the dash lights. Hope this helps.

Oct 31, 2011 | 1986 Chevrolet Nova

1 Answer

Program remote


The horn chirp can be disable by pressing the lock and unlock buttons simultaneously until the hazard lights flash, and no enable press the lock and unlock until the horn chirp.
To reprogram (enter new ID) key fob (keyless remote controller) follow the steps.
1. Close all doors and lock all doors
2. Insert and remove the key from the ignition key cylinder more than six times within 10 seconds. (The hazard warning lamp will then flash.) NOTE: Key should be withdrawn from ignition key cylinder completely each time.
NOTE: Do not rush the insertion/removal key cycling process. The side marker/tail/license lamps and interior illumination will flash twice when this step is accurately completed.
3. Insert key on ignition key cylinder and turn ignition key switch to "AAC" position At this time, the new ID code is entered and original (previous) ID codes are erase.
4. Press any button on the new remote controller once. (The hazard warning lamp will then flash)
NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful. The side marker/tail/license lamps and interior illumination will flash twice when this step is accurately completed and programming is successful.
If there is only one remote controller skip step 5.
5. Additional ID code entry Release the door lock, then lock again with door lock/unlock switch (In power window main switch)
6. Remove key from ignition
7. Unlock driver side door, open driver side door and then close the door. (END)

Feb 20, 2010 | 2001 Nissan Pathfinder

1 Answer

Want to turn off warning lights on dashboard


Change oil light: remove the driver side fuse cover, there is a reset switch. turn key to on position (engine NOT running), press and release reset button. change oil light will flash. press and HOLD reset button again until you hear chimes and the change oil light goes out. it is now reset.
as for the trac off light, there is a button on the dash which turns the traction control on and off

Jun 02, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Rear tail lights won't go on


sounds like dampness is getting in somewhere around the dash board and is causing a short.when it heats up it dries out

Nov 21, 2008 | 1985 Honda Accord

1 Answer

Dashboard and tail lights out on 97" Nissan Sentra


I took my pathfinder to U-HAUL and asked them to check the towing lights. There was a pinched wire by my tail light and they cut it and changed it out for me, it was $5. I am so glad that I didnt take it to Nissan. My second step was going to be getting a new dimmer switch..but the guy who worked on my car said that wouldnt be the problem. He also told me that replacing a fuse that kept blowing out was dangerous and after the first time to get it checked out. Learn something new every day!!

Sep 12, 2008 | 2004 Nissan Pathfinder

3 Answers

Dashboard and tail lights out on 97" Nissan Sentra


i would check the connectors under the dash they have a tendancy to get loose are get hot and short a fuse this is most likely the problem...please rate this....

Sep 01, 2008 | 1997 Nissan Sentra

1 Answer

Keyless entry keylob want lock or unlock doors or trunk.change battery and checked all fuses.


You need to program the remote. Get in to the car and LOCK all doors with the switch on drivers side door. Take the key and insert it into the ignition cylinder in and out 6-10 times, until the flashers/hazards flash on your dash board. Or just keep putting the key in and out (nice and easy now, not fast) until you see the lights on dash flash. After the lights flash, turn the key into ACC mode to make the whole dash light up.(do not start car) .With the key in ACC position, hit any button on remote, that will make the hazards flash again. Turn key off and unlock door with switch again. Open door.DONE.
Good luck.

Jul 15, 2008 | 2001 Nissan Altima

Not finding what you are looking for?
2007 Chrysler Sebring 2.4 Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...