Question about Ford Edge

Open Question

No heat car floor vent ford edge

No heat coming from rear seat vents. all other vents work fine.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: clicking noise behind right side second row seat

I had the same problem. There are two regulators and the one that determines air direction is broken. The door inside is hung up and it strips the gears in the regulator. You can leave all the seats in the car but you have to remove several panels on the inside to get to the regulator. Many or them pry off. This can be risky if you are not careful and you may decide you don't want to risk it. Others need bolts removed (around the seatbelts) to remove. If you get to that point you will find two regulators that are white in color. They are anchored by 4 screws (i think) and come right out. Determine you have the proper one by toggling the face/floor button. You can follow the noise. The real problem here is with the door that hangs up. Mine hung up because the whole assembly was anchored against a big wiring harness on the back side that cracked the whole casing. Bad engineering. You may have to remove some sharp cracked pieces so the door moves easily. Problem is that you now will have a hole in your AC/Heating unit. You can replace that as well (expensive) or seal it some other way. By the new regulator from Ford and reassemble and you're done. If you are handy it should take you a couple of hours. My bro had the same problem on his Explorer and we fixed it much quicker the second time around. If you are not handy, you might want to reconsider.

Posted on Feb 01, 2009

Ad
  • 4369 Answers

SOURCE: 2004 Ford Expedition rear floor cool/heat

03f81ff.gif
Item Part Number Description 1 — Air inlet door 2 — Temperature blend door 3 — Headliner airflow 4 — Auxiliary mode door 5 — Floor airflow 6 18476 Heater core 7 19860 Evaporator core 8 19805 Blower motor
The auxiliary A/C and heating system has the following features:

  • The auxiliary A/C and heating system is functional whenever the instrument panel mounted A/C control is in any position except OFF.
  • The auxiliary blower motor recirculates the air inside the vehicle. Outside air is not available to the auxiliary system.
  • Air is cooled and dehumidified by the auxiliary A/C evaporator core only if the instrument panel mounted A/C control is adjusted to a position that requires A/C compressor operation.
  • The temperature blend door and the auxiliary mode door are controlled by electric actuator motors.
  • Movement of the auxiliary temperature control between COOL and WARM causes a corresponding movement of the temperature blend door to mix air flowing through and around the auxiliary heater core.
  • Movement of the auxiliary mode control between PANEL and FLOOR causes a corresponding movement of the auxiliary mode door to direct air flow between the panel (headliner) registers and the floor duct.
---------------------------------------
I would say the auxiliary mode door (#4) electric motor is not wokring.

=============================================
Auxiliary Blend Door Actuator —Air Distribution Removal and Installation
  1. Remove the RH quarter trim panel cup holder and access panel.
  1. Remove the screws.
  1. Disconnect the blend door actuator electrical connector.
  1. To install, reverse the removal procedure.

Posted on Mar 01, 2009

  • 37 Answers

SOURCE: PROBLEM WHEN SELECTING THE DIRECTION FOR THE AIR

Sounds like you have a supply vacuum problem. When you lose supply vacuum to the control head it defaults to defrost.

Posted on Mar 13, 2009

moparownr
  • 667 Answers

SOURCE: 2004 Ford Expedition XLT, front blend door actuator

Hope I was avle to help, glad you up and going.

Posted on May 27, 2009

cadman000
  • 607 Answers

SOURCE: Air is blowing out of defroster and floor but not main dash vents

Check for vacuum hose leak.

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair


i'd think that the vent adjuster knob/slider is not working correctly strip out the heater panel around the control knobs and check the vent direction is working properly either stiff operation so a little wd40 on the cable would probably do the trick or some thing causing the vent itself to not move

May 01, 2014 | 2004 Ford Crown Victoria

1 Answer

Air comes out of rear floor vents but not out of rear head vents


yes, switch for the vents are switched towards floor. remove compartment box so you can easily see switch cable

Jun 10, 2013 | 2006 Chrysler Town & Country

1 Answer

Rear Floor Vent heat only


Sounds like your heater coolant hose door flap is broken or loose. May want to check behind the heater controls, if your components are mechanically operated. If electronically, may need to perform more troubleshooting before replacing this component.

Jun 17, 2017 | 2004 Ford Econoline

1 Answer

2007 Chevy Uplander Rear Overhead A/C Vents Won't Work


Have you checked the Aux switch near the bottom of the center control console.
There should be a knob with: Aux, Off, 1, 2, 3. This is the switch for the rear AC blower.
If the driver wants to control the rear AC, use the 1, 2, 3 settings.
If you put it on Aux, Than the rear AC is controlled by the passenger in the back seat using the extra controls located on the Overhead DVD player. (The front AC must be on the rear to work)

Jul 09, 2009 | 2006 Chevrolet Uplander

3 Answers

2004 Ford Expedition XLT, front blend door actuator


Hope I was avle to help, glad you up and going.

May 26, 2009 | 2004 Ford Expedition

1 Answer

No air flow through the rear vents with ac or heat on high


make sure the control knob on the dash is on "RR". This lets the driver control all the vents in the back. The heat only comes out of the floor vents, if you have the knob on the blue dots that represents the air conditioning in which the cool air will come out of the vents up above in the back. There is also an area on the control knob on the dash where you can turn the knob to shut the heat and air conditioning off. If the knob is in this position then you can control everything with the knob up above the seat right behind the driver's seat.

Jan 15, 2009 | 2004 Honda Odyssey

1 Answer

No air flow through 4 top rear vents


Don't worry, it's designed that way. The owner's manual is pretty unclear about this. But the heated air only comes out the floor vents underneath the front seats and the "heat vents" at the forward and side of the rear A/C compartment near the floor. The cooled or vent air flows from the overhead vents.

Nov 28, 2008 | 2004 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...