Question about Citroen Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you drive your car more likely for short distances then engine will not get hot enough to start the regenerating process to clean the cloged particulate filter resulting in a antipollution fault.
Drive your car to a motorway or empty dual carriage way (best in nights). The temperature meter should be showing above 60°C when you begin with this process. Place 3rd gear and drive your car at 3000-3500 rev /min for 15 to 20 minutes to let the ecu to kick the regeneration process. Keep driving car for 15 minutes in this state will be enough to clean your catalytic converter and your problem will be solved. But if it doesn't then the problem is with your catalytic converter and more probabily you need to change it.
Posted on Feb 10, 2010
Those are multiple problems. ABS is antilock brake system. Normally this comes on when you need to replace your brakes. Also replace the engine oil in your car and have your car tuned. The check engine light will more than likely go off. If not then the mechanic will tell you what needs to be done to make it go off. Hope this helps
Posted on Jan 18, 2011
Hi i think the problem is one of the coils ( very common on renaults ).
The shaking is the engine missfiring.
Because of the missfiring the emissions are not correct which brings on the engine light.
If you are able to get a diagnosis ( code reader ) done on the car it will tell you which coil is gone
I hope i have been of some help to you
John ( South Wales UK )
Posted on Jun 14, 2011
Tips for a great answer:
Mar 19, 2017 | Citroen Cars & Trucks
Nov 01, 2016 | Cars & Trucks
Apr 04, 2015 | 2007 Peugeot 207 1.4
Apr 05, 2014 | 2006 Citroen C5 2.0i
Apr 02, 2014 | 2009 Citroen C4 1.6i
Feb 19, 2013 | Peugeot 308 Cars & Trucks
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Nov 04, 2012 | 2008 Citroen C-Crosser HDi
Jul 08, 2011 | 2006 Renault Le Car
May 01, 2010 | 2005 Peugeot 405
Nov 22, 2009 | 2003 Mini Cooper
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: