Question about Acura TL

Open Question

I have a 2003 acura tl. With the last snow storm I got stuck in the snow, got frustrated and started switching from drive to reverse. The wheels stopped moving and i heard a sound. Had my car towed, the car starts ,but when i put the car i drive and try to put it back in park it gets stuck in neutral, and i hear a knocking sound coming from the engine. I change the neutral safety switch with no success

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2006 chevy equinox lt can't get

their is a service adsvisory and a warrantee fix. A number of key switches were faulty. A new one will solve the problem

Posted on Aug 11, 2008

  • 39 Answers

SOURCE: problem with ignition switch, starter, flywheel

that sounds correct what happens is the starter still tries to engage the flywheel and grinds the teeth off both. Replace switch then worry about starter flywheel if it starts fine don't worry about it you may have saved it if you didn't let it run that way long

Posted on Dec 24, 2008

chispitas
  • 69 Answers

SOURCE: transmission issue, when in reverse heard a clunk, then a whining

burn out transmission.

Posted on Feb 26, 2009

  • 14 Answers

SOURCE: engine vibration in drive or reverse

Wow..thats not good..first have motor mounts checked, maybe the tranny mount or possibly if ur car has it is the driveshaft bearings...good luck on the oil leak...maybe tranny fluid..make sure if ur losing fluid that ur checking them incl. the tranny fluid...u might find ur leak first of all by rechecking the oil cap where it is supposed to be ...same with all fluid caps.

Posted on Feb 27, 2009

  • 149 Answers

SOURCE: car will not shift into gear

Sounds like a linkage/cable to me. Disconnect the linkage at the transmission and move the shift actuator by hand to see if there is the same things happening. Don't try to do this with the engine running unless someone is holding the brake inside the car.

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can go in reverse but not in drive


Takes two people. Block the wheels, climb under the car and check the linkage.

Jan 13, 2014 | Ford Mustang Cars & Trucks

1 Answer

I changing brake pads & rottor brake on front of Acura 3.2 TL 1996 but I can't re move the wheel?Please help


Before jacking the wheels off the ground, use an appropriate socket with a solid drive size (1/2 inch drive usually works) ratchet or drive handle, and bang it with a sizable rubber mallet to loosen the lugs. In extreme situations, penetrating oil or WD-40 can be applied and let set for a few minutes before trying...

Apr 15, 2013 | 1996 Acura TL Series

2 Answers

IN THE SNOW PROBLEMS GOING UP HILL


As to any cars, when it snow, and going up hill there will be promblems, best way for the tl is turn on the vsa, put it in a low gear, like d1 d2.... and slowly press on the accelerator. Best solution is to stay away from hills until road has been trreat. Remember your Tl is only 2wd drive front wheel. It won't be able to handle like a 4wd or awd.

Jan 30, 2011 | 2005 Acura TL

1 Answer

Reverse lights dont come on. the bulbs and fuse


The switch that lights the bulb is not good ,it must be change,you will find this switch under the gear shift lever

Jan 13, 2010 | 2000 Acura TL

1 Answer

Front wheel bearings on an Acura TL


ya no prb u can do that for the front wheels...but careful that u better check the bearings of rear wheels also...so that it will be safe drive for u!!!!

Jul 25, 2009 | 2000 Acura TL

1 Answer

99 Acura TL dies when I try to start


I have helped many Honda/Acura owners on this issue. Many mechanics will replace many parts prior to solving this problem, which then creates unnecessary repairs and spending. So here is my diagnosis: Notice if your speedometer drops to zero when your engine dies while driving. If this happens its your ignition switch failing. Ignition switches in Honda/Acura vehicles years 97-02 encounter faulty or shorted internal contacts. This causes premateur electrical failure to vital engine electrical parts, causing vehicle to stall intermittedly. A recall has been in place since 2002, approximately 1.3mil vehicles are affected, call your local honda/acura dealer for info and possible free repair or replace the ignition switch yourself. Hopefully my info helps you!!

Jul 25, 2009 | 1999 Acura TL

2 Answers

Engine vibration in drive or reverse


Wow..thats not good..first have motor mounts checked, maybe the tranny mount or possibly if ur car has it is the driveshaft bearings...good luck on the oil leak...maybe tranny fluid..make sure if ur losing fluid that ur checking them incl. the tranny fluid...u might find ur leak first of all by rechecking the oil cap where it is supposed to be ...same with all fluid caps.

Feb 27, 2009 | 1997 Acura TL Series

2 Answers

Replacing HID headlight in 2004 Acura TL


HID Bulb Replacement

A transient high tension (25,000 V ) occurs at the bulb sockets of the high intensity discharge (HID) lamps when the combination light switch is turned ON, it may cause serious electrical shock or electrocution if you do not observe the cautions below.

CAUTION:
  • Never turn on the combination light switch before fitting the HID bulbs to their bulb sockets and completing the reassembly of the headlight assembly.
  • Do not service the headlights assembly in wet conditions, such as rain or snow, near a sprinkler system, or when your hands are wet to prevent electrocution.
  • Do not touch the surface of the HID bulbs with your bare hands and do not stain it with any oils and fats.
  • Do not disassemble the inverter unit and the ignitor unit.
  • Do not turn on the HID bulb by using a power source other than the battery mounted on your vehicle.
  1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the XM radio channel preset. Make sure the ignition switch is OFF.
  2. Turn the combination light switch OFF.
  3. Disconnect the battery negative cable, then disconnect the positive cable.
  4. Remove the headlight assembly.
37a2a12.jpg
  1. Remove the Torx bolt using a Torx T20 bit.
  2. Turn the cover (A) 45 ° counterclockwise to remove it from the headlight assembly.
71b91a6.jpg
  1. Turn the socket (A) 45 ° counterclockwise to remove it from the bulb (B).
  2. Pull the retaining spring (C) away from the bulb then remove the bulb.
  3. Make sure the bulb harness (D) is routed correctly so it does not contact the reflector (E).
  4. Install the new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.
  5. After reconnecting the battery, enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets.

Feb 13, 2009 | 2004 Acura TL

1 Answer

04 TL pass window reverses on way up


ONE OF YOUR SWITCHES ARE STUCK OR BAD FOR THE DOWN BUTTON

Oct 18, 2008 | 2004 Acura TL

2 Answers

Acura tl won't start


Ignition switch problem?

Jul 02, 2008 | 1999 Acura TL

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...