Question about Mercedes-Benz Cars & Trucks

Open Question

Restraint system visit workshop CAN NOT START THE CAR

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76132 Answers

SOURCE: Restraint system defective visit workshop

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Posted on Nov 02, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Restraint svs malfunction consult workshop


You mean SRS..?
Mercedes call it Supplementary Restraint System - the seat belts and/or air bags.
Get a mobile mechanic or a workshop to do a diagnostic check for you to identify the fault.

Mar 21, 2016 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Where are the air bag sensors on a 2000 Lincoln towncar


Sensor - Front Crash Removal
WARNING: Vehicle sensor orientation is critical for proper operation. If a vehicle equipped with an air bag supplemental restraint system (SRS) is involved in a collision, inspect the sensor mounting bracket and wiring pigtail for deformation. Replace and properly position the sensor or any other damaged supplemental restraint system (SRS) components whether or not the air bag is deployed.
WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.
WARNING: To reduce the risk of personal injury, do not use any memory saver devices.
NOTE: The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic procedure again.
  1. Depower the system. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in this section.
  1. Remove the radiator upper sight shield (8C291).
  1. Remove the air bag sensor.
    1. Disconnect the air bag sensor electrical connector.
    1. Remove the three screws.
    1. Remove the air bag sensor.
    2. SECTION 501-20B: Supplemental Restraint System 2000 Town Car Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/10/2004 Sensor - Side Crash Removal
      WARNING: Vehicle sensor orientation is critical for proper system operation. If a vehicle equipped with an air bag supplemental restraint system (SRS) is involved in a collision, inspect the sensor mounting bracket and wiring pigtail for deformation. Replace and properly position the sensor or any other damaged supplemental restraint system (SRS) components whether or not the air bag is deployed.
      WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.
      WARNING: To reduce the risk of personal injury, do not use any memory saver devices.
      NOTE: The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
      NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
      NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic procedure again.
      NOTE: Left side is shown, right side is similar.
      NOTE: The side crash sensors are located under the carpet beneath the front seats.
      1. Position the seat to gain access to all fasteners.
      1. Depower the system. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in this section.
      1. Remove the front seat. For additional information, refer to Section 501-10 .
      1. Remove the safety belt anchor bolt cover.
      1. Remove the bolt and the safety belt anchor.
      1. Remove the front and rear door scuff plates.
      1. Remove the lower B-pillar trim panel.
      1. Remove the carpet to access the side crash sensor.
      1. Remove the side crash sensor.
        1. Remove the retaining bolts and position the side crash sensor in order to disconnect the electrical connector.
        1. Disconnect the electrical connector.
        1. Remove the side crash sensor and bracket.

Dec 16, 2015 | 2000 Lincoln Town Car

1 Answer

Restraint system defective visit workshop


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Nov 02, 2012 | Cars & Trucks

1 Answer

What does SRS lit up on the dashboard mean. 1995 accord wagon.


the SRS stands for Supplemental Restraint System. Most people call it the air bags but the SRS system includes all of the sensors and control units for air bags, seat belt pre-tensioners and passenger detection systems on cars that are equiped with themeach time you start the car up the SRS control unit will do a self-test of the system to make sure all of the sensors are working properly. The SRS light will stay on while that test is conducted. If all is well and everything passes the on-board test the light will go out in about 7 seconds. If something is wrong the light will stay on.whenever a failure is detected for any reason,the SRS light is turned on and the system is shut off. The air bags will not be deployed when the SRS light is on.They call it a Supplemental Restraint System because your seat belts are your primary restraint system.

Mar 22, 2011 | Honda Accord Cars & Trucks

1 Answer

I HAVE A 2003 MERCEDES C 200 K AND WHEN I TERN THE KEY AMESSAGE COMES UP IN DASH AND SES RESTRANTS ERROR DRIVE TO WORKSHOP COULD U HELP PLZ


In your car SRS RESTRAINT SYSTEM ( AIR BAG SYSTEM ) malfunctioning, in this case you must drive your car to the authorized workshop for find what's the fault, It's cant say what's the fault without diagnose

Nov 14, 2010 | 2003 Mercedes-Benz C-Class

1 Answer

Replacing the agnition switch how to?


SECTION 211-05: Steering Column Switches 2001 Focus Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 09/15/2004 Ignition Switch Removal
  1. Depower the supplemental restraint system (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, GENERAL PROCEDURES).
  1. Detach the instrument panel lower panel.
    1. Remove the screws.
    1. Release the fastener.
    e0001946.jpg
  1. Remove the instrument panel lower panel.
    • Disconnect the hood release.
    • Disconnect the data link (DLC) electrical connector.
    e0009940.jpg
  1. Detach the steering column upper shroud.
    • Using a thin bladed screwdriver, release the two clips (one each side).
    e0000671.jpg
  1. Remove the steering column lower shroud.
    1. Release the steering column locking lever (if equipped).
    1. Remove the screws.
    • Remove the ignition key.
    e0000670.jpg
  1. Disconnect the electrical connectors.
    • Disconnect the ignition switch electrical connector.
    • Disconnect the turn signal/flash-to-pass switch electrical connector.
    e0001776.jpg
  1. Remove the ignition switch.
    • Release the clips.
    e0000394.jpg
Installation
  1. To install, reverse the removal procedure.
  1. Repower the supplemental restraint system (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, GENERAL PROCEDURES).

2010&c18=modelyear&c20=g17614&c35=wsm%2cignition%20switch%2cs1y%2c211-05%2cremoval%20and%20installation&s=1600x900&c=32&j=1.3&v=y&k=y&bw=1171&bh=582&ct=lan&hp=n&[aqe]

Apr 01, 2010 | 2001 Ford Focus

3 Answers

What does the red light on the bord with letters SRS means? It stays on for few seconds after I start the car (Honda accord 1995). Thank you


srs means secondary restraint system. e.g air bags and things like that. when it stays on for a few seconds its because it is doing a systems check. if the light stays on all the time then there is a problem. hope i helped.

Jan 28, 2010 | 1995 Honda Accord

1 Answer

2001 c240 battery/alternator - visit workshop light


This is normally a low voltage from the alternator condition. Hook a voltmeter to the battery and note the reading. Should be 11.6vdc to 12.2vdc. Start the car, after a minute or so it should be around 13 to 14 vdc., if not then the alternator may be bad

Jan 09, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

2003 E320


My car keeps displaying a picture of a battery Visit Workshop. How do I clear the code?

Aug 07, 2008 | 2006 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...