Question about Jaguar S-Type

Open Question

2000 jaguar s type my rear parking light stay on when car is off,and switch is off.also car is on rear turn signals do not blink but the the front turn and side markers work fine and reverse donot come on

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
countrysi248
  • 443 Answers

SOURCE: Marker light working but turn signal not blinking

make sure the bulb is grounded good . usually if the front one is lit and the signal is fast the rear bulb might be bad . turn on the side that is not working properly and take off the lense and wiggle the bulb. also you might have to gt under it and check for the ground for the bulb .. holler if ou need more Jerry

Posted on Feb 05, 2009

Ad
  • 2 Answers

SOURCE: passenger side front and rear parking lights staying on

Return the direction indicator stalk to the central rest position to cancel the parking lights.

Posted on Apr 13, 2009

SOURCE: 93 S10 left turn signals not working

Have you tried replacing the flasher? You'd think neither side would blink if the flasher was bad but I've seen this happen and it turned out to be the flasher. You could swap the signal flasher with the 4 way flasher to verify that's the problem before going out and buying one. Should be a few bucks at the parts store.

Posted on Apr 16, 2009

red54eyejp
  • 25 Answers

SOURCE: front driver side turn signal light doesn't flash

replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

Posted on May 09, 2009

kevinj650
  • 82 Answers

SOURCE: turn indicator light flashes quickly. bulbs fine

The quick flash is a fault detection for a burnt out bulb. If bulb is good, check bulb socket. Inspect for corrosion. If needed, replace bulb socket. Check bulb socket connector. Check if fuse. Check emergency flashers ( most cars have a separate circuit).

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia turn signal works but blinks fast on right side when parking lights are on


turn on park lights and signal on right side and take a good look at the front and rear light , see if one is dimmer than the other this may be due to a bad ground and when the park lights are on and drawing more power it also needs better ground, check the sockets front and rear try wiggling the bulb to see which one is causing the problem

Jan 04, 2013 | Cars & Trucks

2 Answers

2000 olds shihouette right turn signal blinks fast and back right does not blink, changed bub in right rear and still have problem


Could be the switch, but more likely the socket. Check the socket for power and ground with a test light.

Aug 21, 2012 | 2000 Oldsmobile Silhouette

1 Answer

Signal lights dont work and want to know where the fog light switch is at


With the switch in sidelight or dip

position, pull the switch to its first

position to turn on the front fog lights.

Pushing the switch in or turning it to OFF
or AUTO will turn off the front fog lights (this is for the front)


With the switch in any position except

OFF or AUTO, pull the switch to its

second position to turn on the rear fog

lights. This will also turn on the front fog

lights unless main beam is selected.

Pushing the switch in or turning it to OFF
or AUTO will turn off the rear fog lights (this is for the rear)

Exterior lighting

Exterior lighting switch

A. OFF.

B. Side (parking) lights.

C. Headlights.

D. Auto.

E. Front fog lights.
F. Rear fog lights.

It is the round knob nest to the steering colume

Aug 18, 2011 | 2003 Jaguar X-Type

1 Answer

Left front turn signal does not flash. Left rear OK. socket was corroded so I replaced socket. No flash. Checked wires for voltage, only the parking light connection ever gets anything. Front and rear...


Try pushing the Hazard switch on the Column several times and see if it restores the connection. From what I understand about the Multifunction Turn switch is that some of the contacts share connections with the Hazard Button.

The contacts work on a type of derailer setup and when the contacts get dirty or wear, things stop working. Moving the Hazard switch resets the points and springs each time you go in and out of the Hazard setting.

If your brake light is working you know the wires to the light socket from the brake switch are okay. Probably would not hurt to check brake light switch as it shares the common wire. The split between the left turn and right turn signal wire has to occur, yet the opposite brake light will stay on steady while the other side blinks.

Oct 22, 2010 | Ford E-250 Cars & Trucks

1 Answer

Jaguar xj6 break light cancels signal


Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.

May 23, 2010 | 1989 Jaguar Vanden Plas

1 Answer

1989 Cadillac rear lights stay on


It may be a turn hazard module under dash.that is the culprit! The power to the third brake light does not go through the module, but the rear brake lamps power is controlled through this module. I am looking at a drawing of one and it looks like it has two connectors with about five wires in one and six in the other. It has some cooling fins on it also.

May 30, 2009 | 1989 Cadillac Brougham

1 Answer

Left brake light stays on


Usually when your signal blinks rapidly it indicates a blown bulb.   Switch on your four-way flashers and check your bulbs at each corner.  On the brake light staying lit, check to see if the left-rear bulb is installed correctly and is the correct bulb for the application.  I've seen people force bulbs in sockets causing the braking element of the bulb to light instead of the parking element.  The braking element is much brighter than the parking element.

Mar 17, 2009 | 2000 Jeep Wrangler

2 Answers

2001 Explorer Sport ,Rear Driver Brake Light and Turn Sig. Broke


Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.

Feb 12, 2009 | 2001 Ford Explorer Sport

1 Answer

Jeep88


try making sure all the grounds are good

Oct 06, 2008 | 1988 Jeep Comanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...