Question about 2005 Toyota Tazz 130

Open Question

Co2 setting heavy fuel consumption, high revs

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How to improve the fuel efficiency?

Consider getting this info on ADDING Hydrogen power to your fuel. Raises fuel mileage 25% to 50%+.
http://tinyurl.com/6zmchd

Imagine if it works - raise your fuel mileage to 21+ in stop n go driving, up tp 35+, maybe 40 mpg with a steady low cruise on the highway, at 60-62 mph.

only costs $170-$200 if you can do it yourself, if you can change pcv / oxygen sensors / plugs / fuel filters, YOU can do it.
Else, pay a mechanic an extra $200 for 2 hours work for him/her to install in 45 minutes.

Greg

Posted on Jun 11, 2008

  • 119 Answers

SOURCE: toyota 1ge engine 0n a Toyota mk 2 heavy fuel consumption

it can be some reasons mybe cylinder head, inlet valve worn out.
it can be cuporator valve releasing more petrol into the inlet.
Brakes it can be. check contacpoint.

Posted on Oct 12, 2008

  • 101 Answers

SOURCE: High fuel consumption

Tune up, Change oil, Wires, plugs,PCV, Air filter

Posted on Sep 10, 2009

SOURCE: my Toyota 1985 has high fuel consumption i have

Did you take it apart. That is my definition of cleaning. Is the float sinking and allowing too much fuel to enter from the fuel bowl. I hope it's not fuel injected because, I only know what you tell me. Most vehicles from 84 on have no carb.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to increase fuel consumption on hyundai matrix/lavita 1.6 dohc petrol


would you not mean decrease fuel consumption meaning to make it go further for the same amount of fuel
to increase fuel consumption
be heavy footed at lights , speed , overload, run on partially flat tires stop/ start , be heavy on the brakes

Dec 17, 2016 | Hyundai Cars & Trucks

1 Answer

Reasons for excessive fuel consumption for 407 hdi


Gas leak, under inflated tires, excessive bearing friction, high speed operation, clogged air filter, improperly working computer, heavy junk in trunk or truck bed, open windows at high velocity, clutch or transmission slippage.

Aug 20, 2016 | Cars & Trucks

1 Answer

Does the driving on overdrive mode cause high fuel consumption, because the transmission use the first three ratios mostly?


driving in over drive mode actually is what gives the economy as the engine rpms will be around 300 less than direct drive . Lower rpms = fuel savings
OD should come in around 60 klm/hr and drop out at around 50 klm/hr. When you are accelerating hold the pedal in a set position and watch the rev counter (rpms ) and each gear change you will see the rpms drop and then build back up as the vehicle speed increases At 100klm/hr the revs should be around 3200 rpms or less but if over ( say 3500 rpms) then may be the OD is not coming in. One way to test a box operation is to find a speed shop with a dynomometer and test the gear selections against loads and engine rpms

Dec 23, 2014 | 2000 Audi A6

1 Answer

Difference between ford 9 inch and 8.8 inch rear end


The size of the crown wheel gear. Ford 9 inch is a strong diff used in V8 models. The 8.8 is slightly smaller but is still a good diff. The gear ratios will probably be different. Manual gearbox cars have different ratios to automatics. The higher the ratio, the faster takeoff you will have but lower terminal speed. At high speeds , the high ratio differential will cause high engine revs and poor fuel consumption. A low ratio will be mediocre takeoff but allows high top speeds and lower engine revs. (Good for fuel economy if you are mostly highway driving)

Sep 25, 2014 | Cars & Trucks

1 Answer

Very high fuel consumption on a nissan vannete cargo 1996 45 liters for 350 kilometres is it normal ?


For sure the fuel consumption if very high specially if you are a moderate driver and do not drive at very high RPM. Now the possible areas to check must be the fuel pump calibration and the timing. If this is out of order/settings then the fuel can be wasted without utilization which can result in high consumption.

Apr 26, 2011 | 1996 Nissan Maxima

2 Answers

I have several questions: Number 1 the initial minutes of my premio (corona) D4 2-litre engine raves at above the 1500 rev per minute but eventually returns to less than 1000 after some minutes;...


George,
1) Yes It is normal for corona Engines to have that high rev when the engine is still cold. It automatically adjusts to the Normal Rev/min when the engine gets warm so don't worry about that.
2) The Buttons are use when you are running on road. PWR means Power meaning that you lock the car in gear Five while sprinting. MNL stands for manual transmission.
3) Econ tries to show you that you are using a higher gear like say 5, therefore your fuel consumption is now being economized and thus low consumption. Actually, its always good if you drive your car with that light on coz it saves on your fuel. It get on automatically.

Don't forget to vote my solution if it was of help to you.

Dec 03, 2010 | Toyota RAV4 Cars & Trucks

1 Answer

High fuel consumption


Hi There,

If you are wanting to lessen the high fuel consumption you must do the following.
1 - Over-Reving is a big no no. Keep the revs between 2 and 4 thousand rpm. (it is highly easy to over rev so lessen the throttle)
2 - You can buy a product called octane booster. The higher the octane in the fuel tank the better for your car. To use insert into fuel tank as you would a bowser nozzle and release amount of octane as per product intructions prior to filling up with petrol, then add petrol after. This ensures proper mixing of octane throughout tank.

Hope this helps

Cheers Buckaroo,
Chris.

Apr 16, 2010 | 2001 Hyundai Tiburon

1 Answer

The rev is going up & down on idle & when driving


have you checked your air inlet manifold for any leakages by spraying WD40 around each portall bolted to the cylinderhead gasket,check for vacuum air pipes deterioration.make sure the engine is running first ,then spray WD40 to check that the engine speed should increase.it sounds like your engine is haveing problems breathing due to heavy hydro carbons increasing./and your CO2% is dropping.

Jan 25, 2009 | 1999 BMW 318 ti

1 Answer

Engine runs on when driving along


Sounds like the choke is sticking on, that would also explain the heavy fuel consumption

Dec 01, 2008 | 1992 Ford Escort 4 Door

1 Answer

Toyota 1ge engine 0n a Toyota mk 2 heavy fuel consumption


it can be some reasons mybe cylinder head, inlet valve worn out.
it can be cuporator valve releasing more petrol into the inlet.
Brakes it can be. check contacpoint.

Oct 11, 2008 | 1987 Toyota Cressida

Not finding what you are looking for?
2005 Toyota Tazz 130 Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...