Question about Peugeot 206

Open Question

Is 99 peugeot 306 xsi steering rack the same unit as 01 206 gti

On my 2001 206 GTi when turning the steering wheel there is a knocking sound from the front of the car, even when the car is stationary. My garage has advised me that it is the steering rack which will be 700 for a refurbished unit plus fitting cost. I have a 1999 306 XSi which I am about to scrap...it had a new rack in it a few years ago and wondered if I could use it. Any advice on the possibility of this or the validity of the garages diagnosis and price would be much appreciated. Thanks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ginko
  • 19396 Answers

SOURCE: fuse box diagram peugeot 206

Check the website below:

Peugeot 206 Fuses.

Posted on Mar 28, 2009

  • 1 Answer

SOURCE: Peugeot 206 2001 GTI

cant find fuel filter 4 peugeot 206 gti

Posted on May 11, 2009

  • 10 Answers

SOURCE: Speedo, rev counter and fuel gauge not working on peugeot 306

hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.

Posted on Jul 07, 2009

  • 274 Answers

SOURCE: i have a 2001 206 gti and the engine just died

hiya mate if you have got a live at the fuel pump when engine is turning over then your relay is working.
you could possably have a fauly crank position sensor (which can be checked using a code reader) which would stop the engine from starting, also check the fuel pressure switch has not been activated (this is located on the n/s/f inner wing and is a small black unit with a red cap on it)
it would also be a good idea to make sure the timing belt has not snapped.

Posted on Dec 16, 2009

citroenchris
  • 600 Answers

SOURCE: Hi I own a peugeot 206 gti 180. It has recently

Check the drop link and sway bar (anti roll bar) bushes also the knock could be in the strut top or the strut itself, maybe disconnect the drop link to the sway bar and drive over a pothole and see if the knock is still there.

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering noise


Yep Tye rod ends need replacing they are wore out that is the sound they will make.

Feb 18, 2014 | Volkswagen Cars & Trucks

1 Answer

Peugeout 306 clunking sound HELPPP


check the suspension ball joints and rubbers . Check the steering ball joints and the rack end bushes for wear. Any front end steering noise is a cause for alarm as it is indicating a part worn excessively and is ready to fail

Feb 08, 2014 | Peugeot Cars & Trucks

1 Answer

Peugeot 306 s16


your plug wires need to be replaced. Open the hood when its dark and the car is running and spritz some water on the wires in a spray bottle. If the car sputters, you have a leaking plug wire.

Jun 18, 2013 | Cars & Trucks

1 Answer

How to fix my steering rack on my 1983 mk1 golf gti


This is a shot in the dark, but its probably your lower steering column bearing, that will make everything wobble, and it happens to almost ALL mk1 vw's at some point. Just google "steering column fix" and you'll have it taken care of.

Your question is vague so that doesn't help. Doubt its the actual rack, as I have an original one in my rabbit with almost 400,000 miles. On top of that I had another rabbit that died around 400,000 with an original steering rack, and I am beating a dead horse by letting you know that my 83 gti has been punished since day 1, and guess what...stock steering rack.

Nov 29, 2012 | Volkswagen Golf Cars & Trucks

1 Answer

I have a 2001 volkswagen gti, and the headlights won't turn on as well as the heater& the directionals. I don't have a clue what it could be.


More than likely it needs an ignition switch. The trim around the steering column needs to be removed. 2 philips straight up just below the steering wheel, one t25 bolt near the column adjuster, and 2 philips behind the steering wheel. You can get to these by turning the wheel. Once the trim if off you can see a large connector for the ignition switch. Before disconnecting it, use a small flathead screwdriver to loosen the switch. There are 2 flat head screws behind some red threadlock between the connector and where you put the key in. Pull the switch out using the wiring, disconnect and reinstall in reverse order.

Dec 07, 2010 | 2001 Volkswagen GTI

2 Answers

Hi I own a peugeot 206 gti 180. It has recently


Check the drop link and sway bar (anti roll bar) bushes also the knock could be in the strut top or the strut itself, maybe disconnect the drop link to the sway bar and drive over a pothole and see if the knock is still there.

Jun 05, 2010 | 2005 Peugeot 405

1 Answer

HOW TO TAKE ENGINE out OF PEUGEOT 306 GTI UP OR DOWN ON TO FLOOR


do you take out sub frame with engine and gearbox attached on a peugeot 306 diesel to change engine

Feb 20, 2010 | Peugeot Liberte Cars & Trucks

1 Answer

I have a 2001 206 gti and the engine just died


hiya mate if you have got a live at the fuel pump when engine is turning over then your relay is working.
you could possably have a fauly crank position sensor (which can be checked using a code reader) which would stop the engine from starting, also check the fuel pressure switch has not been activated (this is located on the n/s/f inner wing and is a small black unit with a red cap on it)
it would also be a good idea to make sure the timing belt has not snapped.

Sep 29, 2009 | Peugeot Liberte Cars & Trucks

2 Answers

Peugeot 206 2001 GTI


Check the alternator belt for proper tension. Also check alternator voltage output. If output is low the rest of the systems can fail.

Jul 05, 2008 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...