Question about 2005 Nissan Altima
How to replace the front struts
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Front struts replacement
Jack up and secure front end of your vehicle,Take off two front wheels. Loosen to bolt on the bottom of struts (Its a bolt and nut). Remove clip that holds brake hose on to strut and remove hose. DO NOT OPEN BRAKE LINE OR DISCONNECT FROM CALIPER. Remove bolts and remove bottom of strut from knuckle/Hub assembly. Then loosen nuts on strut tower( on top of fender inside hood) (3) nuts, mark exact locations of each nut on strut mount area on upper fender weld. Make sure to hold strut on the bottom so it doesn't drop down on caliper and knuckle or on you possibly.YOU WILL NEED A SPRING COMPRESSOR to compress spring so you can take struts off. MAKE SURE THAT SPRING IN COMPRESSED/SQUEEZED WITH A STRUT COMPRESSOR. Then loose center nut on strut tower(may be covered with a circular rubber cover) If nut spin around with out getting loose use vise grips to hold strut rod ONLY TO REMOVE STRUT NOT TO INSTALL. if you use vise grips to install it will damage strut. When nut is off, remove strut and reinstall new one transfer all rubber boots and cushions from old strut. Good Luck thanks for using FIX-YA.com contact me if you need more help.
Posted on Dec 30, 2008
Tips for a great answer:
Dec 12, 2012 | 2004 Nissan Altima
Jul 30, 2012 | 2002 Nissan Altima
Mar 27, 2011 | 1994 Nissan Altima
Mar 06, 2010 | 1995 Nissan Altima
Nov 09, 2009 | 2004 Nissan Altima
Jul 27, 2009 | 2003 Nissan Altima
Mar 28, 2009 | 2000 Nissan Altima
Mar 10, 2009 | 1995 Nissan Altima
Dec 30, 2008 | 2004 Nissan Altima
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: