Question about 2007 BMW 335i Coupe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: BRAKE WARNING LIGHT
I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....
Turn the ignition key to position 2, but do NOT start the car. Wait for about 45 seconds and the brake warning message will be reset.
If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.
Posted on Dec 24, 2008
This will only come on when a tyre has dropped in pressure (not spare). It work on the principle that a tyre with less air has a smaller rolling circumference and therefore a different wheel speed. This is then monitored against other signals from other wheels and determined that a loss in pressure has occured.
If all tyre pressures seem ok, there could be a chance of a small unoticeable leak and would require a bath test. This is when the tyre is dipped in water and bubbles would appear where the puncture is.
Ultimately the system may just need to be reset, or has incorrectly been reset from a tyre change. For this you just press and hold the TPC button (located on the centre console above the gearstick - looks like a flat tyre with an exclamation) turn on the ignition to position 2 and the light will come on re then yellow,go out, come back on yellow. When it comes back on yellow it re-initializing the system. You can let go of the button and after 20 odd seconds the light will go out for the final time, completing the reset.
If the light continues to come on after the reset then you definitely have a puncture somewhere!
Hope this helps!
Posted on May 28, 2009
i have a bmw , 1 series, i have just put air in my tyres and there is now a warning light on the dashboard, have i over inflated my tyres?
Posted on Aug 27, 2009
Tyre pressure warning light
When correct,turn ignition on and use lever on top of indicator stalk to scrool untill you see tyre pressure reset
Press end of stalk to reset
Posted on May 07, 2010
Using the indicator stalk, navigate to the tyre pressure reset option, press the reset button twice in short succession but hold it in the second time until a tick appears on the display
Posted on Jun 02, 2010
Tips for a great answer:
Nov 20, 2016 | 2007 BMW X5
Aug 05, 2014 | 2007 BMW 335i Sedan
Jul 17, 2014 | 2007 BMW 3 Series 328i
Jul 30, 2011 | 2007 Mini Cooper S Convertible
That red light indicates u have loss BRAKE FLUiD in ur system and needs to TOP UP the brake master. It also indicates s pressure loss in the brake system and u have to check the FLUiD, LEAK and ur BRAKE PADS!
Check all of these and tell us wut happened!
Nov 16, 2010 | 2007 BMW 335i Coupe
May 28, 2010 | 2007 BMW 328xi Sports Wagon
May 07, 2010 | 2005 BMW 1 Series
Mar 22, 2009 | 2007 BMW 335i Coupe
41 people viewed this question
Usually answered in minutes!