Question about 2013 Toyota RAV4
Need to remove glove box because something is stuck behind it
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.
Posted on Nov 02, 2008
mcdevito75 here, That"s the drain tube to the A/C evaporator, without it when you run your A/C you:ll have water on the floor on the passenger side. Re attacch that hose to the bottom of the evaporator under the glove box and then thru the firewall.
Posted on Jun 18, 2010
I had the same problem with my 2009 RAV4 lower glove box. I removed the box by popping the top front right post and then the top left front post from theside housings by prying them free with my fingers. They pop out easily. I then let the box fall open and while holding it level to the floor, pulled forward, released the piston from the post on the right, and the glove compartment came out without tools. There was a plastic electrical box cover, which came loose behind the glove box, blocking it from closing. I snapped the cover plate back in place and then reversed the glove box removal process. It took a few minutes and I needed no tools.
Posted on Dec 20, 2010
Tips for a great answer:
Oct 23, 2017 | 2007 Toyota RAV4
Remove the battery cover to access the battery terminals. Disconnect the negative (-) battery cable with the pliers.
Open the glove box door and squeeze the outer part to remove the door. Locate the two screws behind the door to remove the glove box.
Access the ECU behind the glove box. Remove the electrical connectors by hand; remove the bolts mounting the ECU to the inner dash.
Install the new ECU in the same position. Replace the bolts and reconnect the electrical connectors.
Replace the glove box and the glove box door. Reconnect your battery.
Oct 02, 2012 | Toyota Avalon Cars & Trucks
Aug 21, 2012 | 2000 Pontiac Grand Am GT
Apr 30, 2011 | 2006 Toyota Corolla
Nov 05, 2010 | 2009 Toyota RAV4
Feb 26, 2010 | Honda Odyssey Cars & Trucks
Dec 17, 2009 | 1993 Buick Park Avenue
Jul 23, 2009 | 1999 Ford Expedition
May 05, 2009 | 2004 Toyota Avalon
Jan 06, 2009 | 1998 Cadillac DeVille
312 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: