Question about 2005 Chevrolet Blazer

Open Question

4wd. does not work

What could cause the 4wd. not to work? The 2wd. works fine.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 4WD Hi does not work on 96 Chevy K1500 Suburban

we had this same problem, under the car there is a modular,near the transfer case, it just unlugs and plug a new one in.20 min.. it is approx. $80.00 item,$ 350.00 to have it done. we were in yellowstone when we had this problem. hope this helps

Posted on Jan 21, 2009

Ad
DAD5bbbbg
  • 111 Answers

SOURCE: 78' k5 blazer wont shift into 2wd

You have to stop the truck and put it in natural. It should go into 2 wheel drive then. If you have lock outs make sure that they are unlocked.

Posted on Apr 08, 2009

  • 96 Answers

SOURCE: 04 Z71 4wd problems

can you hear the shifter motor trying 2 shift? if not its the shifter motor open the door and try 2 listen when your trying 2 shift it

Posted on Feb 13, 2010

Testimonial: "thanx"

  • 11 Answers

SOURCE: 2000 Chev 4x4 2500; When

either the encoder is bad or the complete encoder motor assembly. this motor and encoder is mounted on the left side of the transfer case. easy to change.
this is the most common problem with the gm electronic transfer case.

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 Dodge Ram 4WD LOW light blinks while running in 2WD. When applied the 4WD High works fine as well as the 4WD LOW but the light keeps blinking and you can hear the system trying to apply 4WD LOW


Replace the motor/module on the transfercase. It has an internal short. Don't replace it. Soon you will have to replace or rebuild the transfer case and the motor.

Oct 31, 2014 | 2004 Dodge Ram 1500

1 Answer

1998 Chevy Suburban - service 4wd light comes on after running 4x4 for 2 mins


Well it could be the selector switch, but I doubt it.
Generally, the service light means something is not working that the computer controls. Solenoids and valves are a couple of possibilities.
The transfer case is shifted by solenoids commanded by the body computer based on the switch position on the dash.
You should be able to have a shop scan the body computer for trouble codes and proceed from there.
A basic code reader may not access the body computer.

Jul 05, 2012 | 1999 GMC Suburban

1 Answer

Clicking noise


Hello, You need someone with GM experience for the particular requirements of your drivetrain. Some types are not recommended to be engaged on dry pavement and others are fulltime.
You might try looking at all of your U-joints for signs of rust tracking or grease slinging.
Work your 2WD into 4WD and back several times. Its' possible that the plungers or Solenoids which engage the gears have Varnished up and simply have not retracted completely back into 2WD position.
Do not know if you are in the States, but there are some soft-cover Repair Manuals at autoparts stores which could cover this.

Nov 18, 2011 | 1997 Chevrolet Blazer

1 Answer

Service 4wd light is coming on but 4wd works fine


i had the same problem in my 99,i replaced the switch assembly on the dash and all is well,hope this helps

Sep 01, 2009 | 1999 GMC Sierra

1 Answer

Switching back 4WD to 2WD - 1998 Jeep Cherokee 4L Limited Petrol


With any 4WD like this, always move a few feet in the opposite direction when disengaging. If you were moving fwd in 4wd, switch to 2wd, back up a few feet, then go fwd.

Jun 30, 2009 | 1998 Jeep Cherokee

1 Answer

Service 4wd light


what causes the 4wd to kick in when you have it in 2wd

Mar 13, 2009 | 2004 GMC Yukon

1 Answer

In 4wd the front end bangs loudly but stays in 4wd - 2002 tb LS


That Thud is the Trasnfer Case for the 4X4. When Gears Break off inside this Transfer Case the Gears are So tightly Fit inside that the Pieces have nowhere to go but into the Other Gears Causing the Thud that you here. This is Causing Further Damage everytime you Here it. I would get the Transfer Case ReBuilt if you need the 4X4 at any time. Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 27, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2005 Chevrolet Blazer Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...