Question about 1989 BMW 3 Series

Open Question

Horn not working on a 318i

Which fuse

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 GMC Sierra horn does not work, fuse keeps blowing.


the fuse blows because somewhere after the fuse , the wire is dead shorting out to ground
check / replace any horn relays

use a multimeter set on ohms resistance and that will tell you that it is shorting out as it will register as a circuit

Jun 27, 2017 | GMC Cars & Trucks

1 Answer

Bmw 318i problems


dont under estimate your battery connections remove and clean and connect tightly, then check all your fuses if needed, then go from there.

Dec 10, 2013 | Cars & Trucks

2 Answers

Horn dosen't work


Check fuse. Usually located under the Steering wheel or under the hood. You will have to use the other side of the cover to determine which fuse controls the horn and see if the metal link is broken. If both are not blown its probably a short in the wire. If it randomly just happened then its a good first guess without knowing any further details.

Usually I check all my fuses any time I am looking for a specific one. Sometimes a random fuse can be the cause, and not the actual Horn fuse that is blown.

Jan 30, 2012 | 2005 Dodge Caravan

1 Answer

The horn won't honk. What do I need to do to fix the problem. What does it mean to have service ride control show up/


If you hear clicking near the engine compartment fuse and relay box when the horn pad is pressed, then you need to check the horn fuse,(probably have to look the location up in the owners manual) if the fuse is blown, you may have shorted out horns or a short in the wiring to the horns. Usually there are two horns for the vehicle and if you install a good fuse in the horn circuit then unplug one horn and test the operation the horn may work or the fuse will blow again. If the horn works, disconnect it and reconnect the other and retest,if the horn does not work and the fuse blows, you have found your bad horn. Good luck.

There are two main causes for Service Ride Control message - active strut failure and accelerometer failure.

Feb 17, 2011 | 1995 Cadillac DeVille

1 Answer

I just bought a 2000 Saturn SL 4-dr sedan. It's in great shape, but the horn doesn't work and the dashboard light don't work. Is this a simple fix with replacing the fuses or dash light or is it a little...


Check fuse for horn and for dash lights. If the interior lights work then suspect dimmer switch for the dash lights. If you press the horn button do you hear a click under the hood or inside the car? If you do not then the fuse is blown and if the fuse is good then the relay may be suspected bad. If the fuse is good and the relay clicks then suspect the horn to be bad. If fuse is blown and you put a new one in and you push the horn and the fuse blows again, then disconnect the horn before replacing the fuse again. Then push the horn button and see if you hear the relay click if you hear a click the the horn is bad or wiring butmost likely the horn. If you have the horn unplugged and the fuse is good and you push thee horn button and no relay click suspect the horn button to be bad. Hope this helps.

Sep 06, 2010 | 2000 Saturn SL

1 Answer

Where is the horn fuse for 94 honda civic DX


check the fuse if the fuse is good use a test light on the wire going to the horn if it lights up when you press the horn button then the horn itself is bad if it does not light up it means no power to the horn ,check fuses first ,and make sure the horn is grounded to metal, if you run a wire from the positive terminal of the batt. and touch it to the wire going into the horn the horn should work if not bad horn

Apr 15, 2010 | 1995 Honda Civic

1 Answer

Need Fuse Map Diagram BMW 318i 1993


check the internet for a bmw e36 ETM ( electronic troubleshooting manual) everything you need is there.

Jun 02, 2009 | 1994 BMW 3 Series

1 Answer

1994 BMW 318i Fuse Box layout


the fuses u are looking for are as follows:
From the top left first row its# 4
then the bottom row its # 19
I also wanted to point out. from 1989 to 1996 the brake switch was the common failure for bmw's
the series it included were 318i, 525-540i, and all 7 series. if the fuses dont fix it.. its the switch
located under a panel u need remove on the drivers side on the steering collum

Apr 25, 2009 | 1994 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...