Question about Ford F-150

Open Question

Trying to find out what the engine numbers for a 351 mean and what year

Just after some info on a 351 engine . After some info on what all the numbers and letters refer to. Also can the engine number be traced back to the year and model of the car it came out in

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: suzuki engine model number

I think 2003

Posted on Jun 26, 2008

j_del
  • 1586 Answers

SOURCE: check engine light is on

P0455 - Evaporative Emission Control System Leak Detected (no purge flow or large leak)

What does that mean? This indicates a fuel vapor leak or lack of purge flow in the EVAP control system. It means a large leak has been detected. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
Symptoms You likely won't notice any drivability problems.
Causes A code p0455 most likely means one or more of the following has happened:

  • A loose or improperly affixed gas cap
  • A non-conforming gas cap (i.e. not factory/original brand)
  • Other leak or damaged piece in EVAP system
Possible Solutions With a p0455, the most common repair is to:
  • Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
  • Otherwise, replace the gas cap, and/or
  • Inspect the EVAP system for cuts/holes in tubes/hoses (you may hear a vacuum noise or smell fuel), repair if necessary

Posted on Sep 17, 2008

  • 39 Answers

SOURCE: Ford engine numbers for Australia

the date codes pl mean 1974 jan i cant find the model codes but in 1974 the model code for a utility (i think you guys call them trucks ) is 45371 ending in 71 and the engine code k is a 5.8 litre 2v high compression enginehope this helps

Posted on Dec 26, 2008

relaga58
  • 158 Answers

SOURCE: i hv just bought vitz 2000 model car but couldnt

engine is always on the engine block most of the time near the timing case

Posted on May 07, 2009

  • 5 Answers

SOURCE: Lost Car radio code after removal of battery head

Real easy. Go to the MB dealership, proceed to the parts department give them the VIN of your car(I used my insurance card) ,they type in your VIN, few seconds... they hand you over a post-it w/ your code.

Go to your car punch in the code and make sure you press OK.

Your done ...radio works again.

P.S. I have a 1999 e320

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can i do to inprove preformance


Remove the valve covers. remove the heads. remove the block. Order summit racing part number FMS-M6007X427FRT. No replacement for displacement. That part number is what you need.

Feb 24, 2016 | Cars & Trucks

2 Answers

I have 351 motor and have tdc but the rotor is pointing toward #8 is that right?


Depends.
If you have tdc on the number one cylinder, and it is tdc on the compression stroke, then the rotor should be close to cyl one.
A four cycle engine has four up and down strokes, compression, power, exhaust, and so on.
Depending on the make model and year, the firing order could be 1-3-7-2-6-5-4-8 which would mean the timing chain or the distributor is one cylinder too far advanced if it is pointing to number 8.

Mar 29, 2015 | Cars & Trucks

1 Answer

WHAT YEAR CHEVY VEGA ENGINE IS CASTING NUMBER T0414CBS 17U170350


I have some info, but not much.
The letter T stands for Tonawonda plant. 0414 stands for April 14 and CBS would tell you its a Chevy and the model info.
17 means Chevrolet and the year 1977. The rest of that number should match the last 6 digits of the VIN number on the car the engine came out of.
You can check with the dealer for more info.

Feb 20, 2015 | Cars & Trucks

1 Answer

DTC Reported P0505,P0351 What does this mean?


google it or better get the FSM for your car, and read how to do the tests, that prove what causes each DTC.
505 idle speed failure.
351
http://www.obd-codes.com/p0351

there are 5 engines, so first find that out,.
351
ignition Coil # 1 Primary Circuit Peak primary circuit current not achieved with maximum dwell time.
this means the coil primary is open (other books show the fail is for too low current (open coil in COP)

505
Engine started; system voltage over 11.5v and the PCM detected an unexpected voltage condition on one or more of the IAC motor circuits for 2.75 seconds with the IAC motor active.

id fix the 351, cop coil , its probably bad, or bad connections to it.
then clean the iSC,
then reset all codes, with a scan tool
drive 20 miles or until CEL glows, driving and the rescan.

Oct 29, 2013 | 2007 Jeep Grand Cherokee Overland

1 Answer

I have a Cleveland 351 rebuilt engine and I would like to find out the history of the engine, such as what year it was made ect.


contact ford customer service on line and give the engine number and request the build of material for that engine and the vehicle it was initially installed in.

Sep 05, 2013 | Ford Cars & Trucks

1 Answer

Will my 351 modified fit in place of my 360 in ford f-150


Probably but find a ford car club and the members will be glad to help with the problems you will encounter.

Mar 13, 2013 | Cars & Trucks

1 Answer

I have a 1973 ford mustang grande and the engine in it is not the original engine. I was told it was the original 302 but i know its not. I looked up the model/serial number right behind the carbeurator on...


That number is not on the block - it is on the intake manifold. It is also not a model or serial number. That number is the casting number for an intake manifold. Yes, it is an intake manifold for a 302 cid engine.

Feb 22, 2011 | Ford Mustang Cars & Trucks

1 Answer

Trying to find out engine size have serial number D4TE942582A


if it not a diesel the more common motor that came in these trucks was a 351windsor some came with a 351 modified but very few if you call a parts house and look for say a carburator or something of that nature they should ask you what engine size and be able to tell you from the 8th digit of the vin.

Aug 29, 2009 | 1983 Ford F 250

1 Answer

Ford engine numbers for Australia


the date codes pl mean 1974 jan i cant find the model codes but in 1974 the model code for a utility (i think you guys call them trucks ) is 45371 ending in 71 and the engine code k is a 5.8 litre 2v high compression enginehope this helps

Oct 22, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...