Question about Cars & Trucks

Open Question

EBS03222-00 Fault code appear and wheels are very hot

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have audi Q5 2010 model i have a fault code to the transmission i dont know what is this P1f68


HI,
Strongly suggest taking to the dealer as it should still be under warranty.

Code info I googled:

OBD II Fault Code P1F68 :Description of OBD II Fault code P1F68

TH2TNK Sensor Value Offset Shifting
Possible failuer of OBD II Fault code P1F68

  • Hydrogen Tank Internal Temperature Sensor (TH2TNK) offset shifting
  • Inlet Air Temperature Sensor (TA) offset shifting
  • Offset shifting of both Teperature Sensor (TH2TNK) and Inlet Air Temperature Sensor (TA) in Hydrogen Tank
  • RTC function error (Miscalculated Soak Time)
  • FSVSCM failure
  • FCCM failure
Diagnostic Procedure using AutoHex auto Scan tool tester
  • The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
  • If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.
Test Conditions using AutoHex Scan tool tester
  • Vehicle speed / wheel speed is normal
  • Brake is out of action
  • The automatic brake is out of action
Clear Fault codes Conditions
  • The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
  • If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.
MIL Status
  • Glow ON


Note:
  • AutoHex is a professional OBD /OBD II diagnostic scanner / scan tool tester.
  • This fault code is a GERENRIC fault code, some cars may change the meaning of this fault code.
    To get the accurate fault code description you may use AutoHex OBD scanner

Oct 24, 2012 | 2010 Audi Q5

1 Answer

Car dies when given gas 2002blazer


Have the computer tested for fault codes or buy a code reader, you will need a OBD2 code reader, it plugs in under the dashin front of the steering wheel. Here is a link to a code reader like you need. Just click HERE

Feb 22, 2012 | 2002 Chevrolet Blazer

1 Answer

Abs light stays on I have put new brake line on new calipers because they were sticking causing brakes to get hot, thats all fixed but light still stays on.


the ABS light is on because there has been a fault detected by the ABS module. It has nothing to do with the actual braking system.

The ABS module does a self check every time you start the vehicle. If it detects a problem during that self check the ABS light will stay illuminated and a code or codes for the fault will be stored in the ABS module. Scanning the module will allow you to pull the codes and proceed with diagnosing why the fault is occurring.

The most common source of ABS problems is bad wheel speed sensors or broken wires to the wheel speed sensors. Again pulling the codes from the ABS module will narrow down the possibilities.

Once you now what codes are present post them and we will be happy to assist you further.

Apr 21, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

MESSAGE CENTRE TC


TC = Traction Active

If your vehicle is equipped with the Traction Control system, this message will stay on a few seconds after the traction system stops limiting wheel spin.

This message will appear when the traction control system is limiting wheel spin. Keep in mind that when the warning lights turn on, a fault code is stored in the ABS control module (in this case). Retrieving, diagnosing, and repairing any ABS system faults will be necessary to keep the light off. A common fault with ABS systems are the wheel speed sensors, stored codes may confirm this.

Hope this helps.

Apr 13, 2011 | 2005 Chevrolet Impala

2 Answers

Why does my abs light stay on?


Dear Madam or Sir,

this is possibly due to a faulty ABS-Wheel-Speed-Sensor. There is one mounted to each wheel, the ABS control unit compares all four signals to compute the moment to intervent. If there is one signal unplausible or missing, the control light will appear to show you that there was an error recognized and stored to the control unit´s memory.

You should see the shop to access the fault memory via diagnosis eqiupment to get to the heart of the matter.

Kind regards from Germany,

AutoDoc P. :)

Jun 25, 2010 | 1996 Chevrolet Blazer

1 Answer

Car overheating and ac is hot and have 0645 code


There is an electrically driven clutch on the front of the air conditioning compressor which engages when air conditioning is required The AC compressor has a fan belt driven wheel on the front of it. The belt turns this wheel all the time. When the a/c is off this wheel spins freely. When a/c is required the electrically driven clutch engages this spinning wheel to supply drive to the a/c compressor shaft. The 0645 code concerns a fault with this clutch.

Jun 16, 2010 | 2001 Chrysler PT Cruiser

2 Answers

Check abs system lite on how do you find the code list


ABS Fault Code List 1991 Corvette (C4)
Code Definition
21 Right Front Wheel Speed Sensor Fault
22 Right Front Toothed Wheel Frequency Error
25 Left Front Wheel Speed Sensor Fault
26 Left Front Toothed Wheel Frequency Error
31 Right Rear Wheel Speed Sensor Fault
32 Right Rear Toothed Wheel Frequency Error
35 Left Rear Wheel Speed Sensor Fault
36 Left Rear Toothed Wheel Frequency Error
41 Right Front Solenoid Valve Fault
45 Left Front Solenoid Valve Fault
55 Rear Wheels Solenoid Valve Fault
61 Pump Motor or Motor Relay Fault
63 Solenoid Valve Relay Fault
71 Electronic Brake Control Module Fault
72 Serial Data Line Fault
75 Lateral Accelerometer Fault (Short ot Open)
76 Lateral Accelerometer Fault (Signal out of Range)

Mar 12, 2010 | 1991 Chevrolet Corvette

1 Answer

ABS and ESP BAS is turned on and the fault code(c1041) appear ,my car is DODGE MAGNUM model 2008


C1041 code is-Left Front Tone Wheel Performance
the speed sensor was slower then the other front one to react to something,or the left wheel spun and not the right front one,
or there is a problem in the sensor or wiring

Nov 22, 2009 | 2008 Dodge Magnum

1 Answer

What does it mean when a yellow symbol appears on the dash board of your 2005 dodge caravan


it means you have a fault code in your anti-locking brake control module. Probably a wheel speed sensor fault code. (commom fault)

Sep 26, 2008 | Dodge Caravan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...