Question about Jaguar Cars & Trucks

Open Question

Noisy hydraulic lifters

Noisy lifters in xj8

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 58 Answers

SOURCE: hydraulic lifters

Yes, but there is still a lot of stuff to move out of the way to get in there and pull them. I would try all the chemical remedies for sticky lash adjusters (oil flush, marvel's mystery oil, etc.) first, then check the timing belt to see if a worn timing belt has let it slip a tooth and the valve timing is off for that reason before digging into the lifters. There used to be a forum that had video and audio from a subaru legacy this model before and after swapping out a bad lifter. Google for it and see if the noise matches.

Posted on Mar 21, 2009

  • 158 Answers

SOURCE: very noisy squeky fron suspension on jaguar xj8

You might need a lube job or you may need to see if noise is coming from another place such as your engine water pump, brakes, power steering. Look for leaks.

Posted on Sep 14, 2009

drsinister69
  • 2317 Answers

SOURCE: mechanical or hydraulic lifters for my '99 montero sport??

Hydraulic

Posted on Mar 16, 2010

Testimonial: "thank you. i appreciate it"

  • 14036 Answers

SOURCE: Replacing Hydraulic Lifters

YOU HAVE TO REMOVE VALVE COVERS LOOSEN REMOVE ROCKER ARMS ASSEMBLY KEEP ROCKER ARM ASSEMBLY IN ORDER SO THEY GO BACK IN THE ORIGINAL POSITION.YOU HAVE TO REMOVE INTAKE MANIFOLD ALSO.YOU NEED A REPAIR MANUAL FOR TORQUE SEQUENCE ON THE INTAKE MANIFOLD AND ROCKER ARMS TORQUE.

Posted on May 27, 2010

  • 14585 Answers

SOURCE: can noisy Hydraulic roller lifters

Possible. I have replaced the roller rocker arms and push rods because they get clogged and wear out both parts. I guess if left to long they would punch a hole threw the arms and knock alot louder.

Posted on Jul 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 jag xk8 that sounds like it has a noisy hydraulic lifter, is there any additive that works good in helping this?


you may try adding a engine oil flush follow the instructions on the container if the lifter is blocked that may help but that engine at that model/year suffered with worn nicosyl coated liners which made the engine poor starting/noisy unless it has been reworked with cast liners

May 10, 2017 | Jaguar XK8 Cars & Trucks

2 Answers

A noisy engine


low oil pressure, wrong oil filter, worn hydraulic lifters , worn rockers at valve stem ends
worn rocker bushes
wrong viscosity engine oil
and engine is spelt ENGINE nt how you spell it

Jan 05, 2016 | Cars & Trucks

1 Answer

Noisy lifter


I would try an engine flush and oil change first. It probably has a hydraulic lifter that is not pumping up due to low oil viscosity, or dirt in lifter. If that don't work then you may have a rocker arm coming loose, or a bent pushrod.

Mar 10, 2014 | 1999 Chevrolet Monte Carlo

1 Answer

Previous problem - hydraulic lifter noisy - car first lost oil hose to turbo - before this lifters, etc. were fine- 2003 PT cruser w/ turbo


that oil hose probably lost enough engine oil to starve lifters... but then again, that engine shouldn't have lifters since it an overhead cam... suspect your tappets were starved of oil... might come around, might not...

Dec 28, 2013 | Cars & Trucks

3 Answers

Looking to adjust valves on a 2.2 chevy motor in a Corsica hydraulick lifter


Sorry but there is no valve adjustment with hydraulic lifters - can turn the lifter upside down fill with oil - let sit for a while and then tap on the lifters to see if they make noise - if noisy replace.  Camshaft may be worn on the lobes or may have jumped timing if belt.

Jun 09, 2010 | 1994 Chevrolet Corsica

2 Answers

I have a 89 ford ranger with a 2.9 v 6 and the lifters are tapping it has good oil pressure .


Very common problem, some 2.9L were mechanical lifters that required adjustment, others have trouble with the hydraulic liters being noisy.

Oct 26, 2009 | 1988 Ford Ranger

1 Answer

I have a noisy cam follower on a hyundai accent is it a big job?


No such thing as a 'cam follower' on any engines. Need clarification from someone who knows what they're talking about. Common misconception about 'cam followers'.. they simply don't exist -- cam lobes push against lifters (or rockers), in turn (rockers)lifters push against valve stems, valves then 'open' or 'close' accordingly. Perhaps you're describing valve/tappet noise?... if so, is the engine design of 'solid' or 'hydraulic' lifters?..If Solid, then overhaul, is hydraulic, then perhaps 'Z-Max' treatment will help.

Sep 26, 2009 | 2002 Hyundai Accent

3 Answers

Do the valves need periodic adjustments in a 1999 Chevy suburban and how many valves per cylinder


The valves never need adjusted, .Do to hydraulic lifters and zero clearance.The rocker arms are torqued to 35 ftlbs.So you never have to worry about it.If there is a noise have your lifters checked:)

Aug 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Engine runs good then I hear a tapping noise. could I have a bridge broke inside the engine? 1987 brougham with a 350 Olds motor.


noisy lifter is number one....get an addititive like hyper lube and run it 20 min on the freeway,. lifters are hydraulic and get gummed up with a varnish like substance. an additive dissolves it and restores the hydraulic lifters action,which operates the pushrods that operates the valves

Jul 23, 2009 | 1987 Cadillac Fleetwood

2 Answers

Noisey valve lifters in 2001 blazer


I suggest Blue Devil products for noisy valve lifters. If they are too worn or one of them is broken , no product will work . The lifters and valves have to be overhauled.

Apr 07, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...