Question about 2010 Ford Fiesta 1.4

Open Question

How to change head light bulb - 2010 Ford Fiesta 1.4

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Mazda 5 minivan how do I change the headlight bulb


Headlight Change 2006-2010 Mazda 5 - CarCareKiosk

www.carcarekiosk.com/video/2009_Mazda_5_Sport_2.../headlight
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

2 Answers

We are trying to change a head light in the truck but the head light cover looks like its sealed with glue is that normal its not comeing off easy


The head light is a lens, the bulb is replaced, the bulb is at the rear of the head light under the hood, the retainer twists off and then the bulb is removed.

Mar 03, 2011 | 2005 Ford Explorer

1 Answer

1991 Toyota Camry: How do I change the headlamp bulb on the driver's side? What steps need to be done?


Hello first start by opening your engine hood rite behind your head lamp pot is a plug socket simply twist counter clock wise and socket will come out remove bulb and replace turn clock wise to tighten up turn head lights on to check that new bulb works both high and low beam you have now changed your head lamp bulb and restored your lights

Jan 23, 2011 | 1991 Toyota Camry

1 Answer

My passenger head light went dim and i changed it to a brand new bulb already and it is still low


You got a bad ground connection somewhere.
You have a voltage drop,where you shouldn't have,and as a result the bulb is dim.
Check the bulb socket/connector and related wiring, to that head light

May 21, 2010 | Cars & Trucks

1 Answer

How do i change the brake light on jeep liberty 2006?


1) You will need to open the rear swing door.

2) On the inside jam there are two torx headed screws (T-15's if I remember correctly).

3) Unscrew the two torx screws.

4) The light is now held by two mounting tabs (small spherical headed plastic sets that go through a rubber grommet).

5) You will need to pry the light casing off (easy pressure with a good size flat head screw driver will do the trick).

6) The light bulbs are twist mount settings inside the light casing.

7) Twist out the mount setting, change the bulbs, and reset the light mountings.

8) To put the light casing push the light casing back on and put in the screws. Everything else will work in reverse when it comes to assembling the whole unit.

2006 Jeep Liberty Replacement Light Bulb Sizes
Low Beam Headlamp Bulb Size: 9007
High Beam Headlamp Bulb Size: 9007
Parking Light Bulb Size: 2825 or 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3757ALL
Tail Light Bulb Size: 3157
Stop Light Bulb Size: 3157
High Mount Stop Light Bulb Size: 921
Fog/Driving Light Bulb Size: 9145 or H3-55W
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3157
Front Side Marker Light Bulb Size: 168
Ash Tray Light Bulb Size: 161
Map Light Bulb Size: 578
Dome Light Bulb Size: 578
Step/Courtesy Light Bulb Size: 906
Trunk/Cargo Area Light Bulb Size: 578

Thank you for using fixya, and good luck

May 08, 2010 | 2006 Jeep Liberty

1 Answer

How do i change the lowbeam headlight


There are two clips on the head light assy under the hood that you pull up and the head light comes out. you have to change the bulb in the head light because low and high beam lights are the same bulb.

Feb 07, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

Trying to open light to change head light bulb


you may have to start the car if they are vacuum operated or if they are electric you may have to turn the lights on to be able to get to the problem

May 26, 2009 | 1998 Pontiac Bonneville

1 Answer

How to change head lights on a toyota echo 2004


you unplug the bulb then there is a "collar" around the light bulb just turn i belinve its counterclock wise and remove the bulb, dont toouch the new bulb reverse the removel to install

Apr 18, 2009 | Toyota ECHO Cars & Trucks

1 Answer

Changing head lamp 04 grand am


you need gloves hands cant touch bulbs .oils from hand causes bulb to blow.to change bulb you raise hood remove head light housing has to be removed before you remove bulb.

Mar 07, 2009 | 2004 Pontiac Grand Am

1 Answer

CHANGING HEAD LIGHT BULBS IN 2002 CHEVY S-10


Right behind the light there should be 2 clips pull up on those and the headlight will come out to change the bulb

Dec 13, 2008 | 2002 Chevrolet S-10

Not finding what you are looking for?
2010 Ford Fiesta 1.4 Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...