Question about Cars & Trucks

Open Question

Where is the brake bleed screw on toyota hiace

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Hiace Toyota

Near the foot-step on the front passenger door (open the door first!)

Posted on Mar 18, 2009

Ad
polarcycle
  • 1392 Answers

SOURCE: toyota yaris brakes how do you bleed the brakes on a toyota yaris

have someone pump the pedal and hold it, then you work from the right rear, left rear, right front, left front, while the person pumps and holds several times at each wheel.

Posted on Jun 10, 2009

badnad
  • 1 Answer

SOURCE: How do you disassemble toyota hiace 2006 dash?

Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.

Posted on Dec 06, 2009

agent91
  • 2100 Answers

SOURCE: having problem bleeding brakes cant find the brake

The bleeder screw is in the back next to the brake line into the caliper. Start the bleeding at the right rear, farthest from the reservoir. Then move towards the front left. Keep checking the fluid level and make sure you don't let go of the pedal with the screw loose. Get a 6 point box wrench on there , about 8mm, and a piece of hose to run the fluid into an empty can. Check it out, hope this helps.

Posted on Aug 29, 2010

  • 1 Answer

SOURCE: how to change gearbox oil on a toyota hiace van...

Creating Gears Problem 1st and 3rd sleeping gears, how to romove this problem

Posted on Oct 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed clutch master cylinder of toyota hi ace commuter 2010 model??


you bleed the same as you would bleeding brakes. you just won`t get the hard pedal like with brakes but you should feel resistance and no air coming out of system when you open the bleeder screw on the slave cylinder. make sure the reservoir does not get empty or you won`t get the air out of system.

Aug 04, 2015 | 2007 Toyota Hi-Ace 220

1 Answer

Hi there,Could give me idea on costings for replacing brake pipes on a toyota hiace? cheers


you can guess approximately the time you think it may take and add to it as sometimes there are problems. I would think about 1.5 hours to replace one line including bleeding the system.

Mar 01, 2015 | Toyota HiAce Cars & Trucks

1 Answer

Do you have to bleed brake slave cyclinder when replacing


replacing brakes or the brake master cylinder, or brake caliper? If your just doing brakes then you can get away with not bleeding brakes. Just open the master cylinder before you push the caliper in with the C-clamp. If your changing the caliper then yes you have to bleed the brakes. There is a bleed screw on the caliper.

Jun 02, 2012 | 1998 Toyota Camry

1 Answer

HOW DO YOU BLEED THE BRAKES ON 100 SERIES CRUISER


Start the engine, fill up full the brake fluid reservoir, and let someone press the brake pedal down to the floor for 3 times,, bleed the bleeder screw behind the tire.. position yourself closed to back plate of drum or caliper for easy bleeding work. when the bleeding screws is loosed brake fluid leaks with a bubbles. then close it again and tell the guy in the pedal brake to press it again until a hard press is felt and bleed the bleeder screw again, stop only the process when there is a hard pressing already on the brake pedal which is the brake system is now working properly.

Aug 16, 2011 | 2003 Toyota Land Cruiser

2 Answers

I changed about everything,cylinders calipers,shoes,pads,and new rotors. then after following correct bleeding proceedures still no pedal.oh, and no e- brake either .what the heck am i doing wrong?(1991...


If you have no e brake that tells me your problem is something to do w/rear brakes. Pull your re brakes back apart and make sure everything is seated properly. Sounds like you didn't adjust rear shoes out far enough. Double check rear adjustment THEN bleed again - rt rear -> lft rear ->rt frt -> lft frt.

Mar 14, 2011 | 1991 Toyota Pickup

1 Answer

How to bleed 1991 hiace clutch?had new master cyl


need to bleed the slave cyl, on bell houseing.

Jan 11, 2011 | 1991 Toyota Land Cruiser

1 Answer

Bleeding clutch


Bleeding because you replaced parts? or it's getting soft/spongy / you have a leak. If the latter then you need to fix the leak first ... worn master or slave cyl. Otherwise bleeding is like a brake cylinder ... someone pushes on the peddle ... helper opens the bleed screw to let air and fluid out ... close bleed screw ... release pedal ... repeat.
Make sure the master cyl doesn't run out of fluid.

Dec 03, 2010 | 1994 Toyota Pickup

1 Answer

Took my 93' Toyota, has 193,000 miles replaced the


THE MASTER CYLINDER NEED TO BE BLED FIRST.BEFORE PUTTING ON THE CAR.TO MANUAL BLEED BRAKE SYSTEM.YOU NEED 2 PEOPLE TO DO A BETTER JOB.YOU FIRST BLEED THE LEFT REAR RIGHT REAR LEFT FRONT AND RIGHT FRONT. WHEN YOU BLEED THE BRAKES.HAVE THE HELPER PUMP BRAKES 3 PUMPS.AND HOLD BRAKE PEDAL IN.YOU NEED A CLEAR BLEEDER HOSE IN A CLEAR BOTTLE HALF WITH CLEAN BRAKE FLUID. WITH BLEEDER HOSE ON BLEEDER SCREW AND OTHER END BLEEDER HOSE IN BOTTLE OF BRAKE FLUID.WHILE HELPER PUMP BRAKE PEDAL HOLD IT IN OPEN BLEEDER SCREW 1/4 TURN ALLOWING AIR BUBBLES LEAVE THE BRAKE SYSTEM.CLOSE THE BLEEDER SCREW BEFORE BRAKE PEDAL RELEASE.HAVE HELPER PUMP BRAKE PEDAL 3 TIMES. WITH PEDAL HELD DOWN OPEN BLEEDER SCREW GETTING AIR OUT OF THE SYSTEM.WHEN YOU SEE SOLID FLUID COMING OUT OF BLEEDER HOSE THE AIR IS OUT THE BRAKE SYSTEM.DONT DRIVE CAR ON HIGHWAY IF YOU STILL CANT GET SOLID BRAKES. HAVE CAR TOWED IN TO BE PRESSURE BLEED.

Jun 19, 2010 | 1993 Toyota Corolla

5 Answers

Is there a bleeding sequence for a 1990 Toyota Four Runner? We replaced one front driver side brake line and both calipers and we cannot seem to get it to bleed properly. Thanks


normally, the brakes are bled starting from the furthest brake to the closest with respect to the master brake cylinder. the sequence is : right rear, left rear, right front, left front. pump the brakes until pressure is built up. do this rather slowly. while keeping downward pressure on the pedal, open the bleed screw slowly. the pedal will go to the floor. hold the pedal on the floor and tighten the bleed screw. do this until no air is observed. keep the reservoir. repeat with the rest of the brakes following in sequence

http://www.aa1car.com/library/2003/bf90347.htm

May 31, 2010 | 1990 Toyota 4Runner

1 Answer

Adjust rear brakes Hiace van


usually this vehicle is equipped with rear drum brakes with auto adjuster. thy backing up about 30 kph and step on the brakes hard. do this 2 or 3 times this should adjust the brakes.

May 28, 2009 | 1991 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...