Question about 2012 Mercedes-Benz GL-Class GL350 BlueTEC 4dr SUV 3.0L V6 Turbodiesel AWD 7-speed Automatic

Open Question

Hazard s wont turn off - 2012 Mercedes-Benz GL-Class GL350 BlueTEC 4dr SUV 3.0L V6 Turbodiesel AWD 7-speed Automatic

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Hazard Lights come on and can't turn off


Hi Todd:
I'd be thinking that the switch is defective.
The hazard lights are there for a reason so I would not disable them.
My suggestion?
Get the switch checked.

Aug 26, 2015 | Cars & Trucks

1 Answer

Turn signals wont work but flasher an lights come on


If the hazard flasher is working but the turn signals aren't, the problem is most likely either fuse A11 or the #2 relay in the trunk fuse block. However, if these check out, the problem could be either the turn/hazard switch assembly or the turn flasher module.

If both the turn signals and hazard flasher are not working, the most likely problem is the turn/hazard switch assembly.

May 26, 2015 | 1994 Cadillac DeVille

1 Answer

No turn signals. hazard lights work only when button is held in. Hazzards will not stay on. Is problem in turn sig switch or hazard light switch


If hazard switch wont stay engaged and the turn signals run through it I would replace hazard switch then retest

Apr 11, 2015 | Cars & Trucks

1 Answer

Kia hazard lights stay lashing even when the vehicle is not running and wont stop flashing


Has the HAZARD switch been activated? If the switch is off then there may be a problem with the switch or the flasher module.

Feb 20, 2015 | 2014 Kia Sorento

1 Answer

Hazard lights wont come when you push hazard button turn signals will not work push it again and they work


it sounds like the relay has gone for your hazard lights, when you press the button to turn them on, it will disconect the power to the main indicators hence wont work when hazards pused in, try locating either the hazard flasher unit, or the relay , have you checked the fuses?

Feb 01, 2010 | 2000 Hyundai Elantra

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Haz flashers wont work but blinkers do


There are 2 seperate flashers 1 for turn signals and 1 for hazard.The hazard flasher is located in the convenance center the turn flasher in the fuse box. Also seperate fuse's for each. One battery circuit for hazard Ignition for turn signals.Check fuse for hazard,if good try swapping in the turn signal flasher and see if hazards work.They use the same flasher unit.

Aug 20, 2009 | 1993 GMC Safari

2 Answers

Turn signal and hazards wont work checked the fuses and the flasher already


Do you have a trailer wiring harness? If you do, recheck the wiring there. If that doesn't help and you have properly checked the flashers then you need to check each bulb

Jul 03, 2009 | 2005 Jeep Wrangler

Not finding what you are looking for?
2012 Mercedes-Benz GL-Class GL350 BlueTEC 4dr SUV 3.0L V6 Turbodiesel AWD 7-speed Automatic Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...