Question about Nissan Maxima

Open Question

2002 i35 infinity keeps blowing eccs fuse 1 - Maxima Nissan Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pingman37
  • 58 Answers

SOURCE: How to program 2002 i35 infiniti keyless remote?

The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

Posted on May 05, 2009

pingman37
  • 58 Answers

SOURCE: Put new rear rotors and pads on my 2002 I35

Doesn't sound like the brake lines were bled properly. Many times after pad and rotor installation if the lines are bled correctly you will have to pump them initially after the repair for a couple of minutes until the pressure is built back up. Also check the master cylinder and make sure fluid level is ok.

Posted on May 05, 2009

Shereena_M
  • 601 Answers

SOURCE: how do you get at the radiator drain plug on a

Hi...

This picture should help you.

f474e50.jpg
Thanks
Smith

Posted on Jul 26, 2009

  • 155 Answers

SOURCE: How do I replace my cam sensors and crank sensor

simple check to see if is the bank 1 or bank 2 cam sensor
do you a code for cam sensor

Posted on Apr 26, 2010

IPS_POWER
  • 36 Answers

SOURCE: I NEED THE FIRING ORDER DIAGRAM FOR A 2002 INFINIT...

REAR OF CAR

1 3 5

2 4 6

RADIATOR (FRONT OF CAR)

Posted on Dec 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Infiniti i35 wiring diagram


I WOULD CHECK WITH DEALERSHIP, MAY BE A RECALL ISSUE

Jun 24, 2013 | Cars & Trucks

1 Answer

2002 infinity i35 will not crank or turn over, yet dash lights work


The ignition switch could be defective but you don't mention in your narrative whether you had the starter checked

Jan 14, 2013 | Infiniti I35 Cars & Trucks

1 Answer

I have a 2002 infiniti I35 with 150K on it when I park the car and take the key out the some motor in the engine keeps running. Why? I took out the engine cont #1 fuse (15amp) out from underneath the hood...


This may be the engine stabilizer mount motor. It can get stuck, and run all night. I had this happen recently. You can pull the fuse, but the car will not run as smoothly until you replace the stabilizer.

Nov 27, 2011 | 2004 Infiniti I35

1 Answer

My car keeps making a clicking sound when I try to start it, eventually it will start but later on it will do the same thing. I have i35 2002. Brand new alternator so I dnt understand what's goin on!


If its a single click every time you turn the key to the crank position you need a starter.

If its a series of clicks when you hold the key in the crank position you need a battery.

Sep 28, 2011 | 2004 Infiniti I35

2 Answers

How do i replace the camshaft position sensor on a 2004 infiniti i35


hi, i have infinity fx 35 2003 it light on the service engine camshaft position sensor bank 1 , i replaced the bank 1 after 3 hour it light on again service engine + VDC off and slip i put the scanner it told me camshaft position sensor bank 1 again what can i do ?

Jul 24, 2010 | 2004 Infiniti I35

1 Answer

How do I replace my cam sensors and crank sensor in my 2002 Infiniti I35. I have an 02, not an 04


simple check to see if is the bank 1 or bank 2 cam sensor
do you a code for cam sensor

Apr 26, 2010 | 2004 Infiniti I35

1 Answer

I tried Penzoil synthetic 5w30, is this a good oil for this car? I changed oil june12 @124,262 mi. I now have 128,603mi and my check engine light is on and for the first time my oil was very low. I bought...


some of the nissan/infiniti 3.5L engines have been known to have internal ring/valve seal problems therefore you should either keep a quart or two in your trunk or think about selling it.You should change your oil a little early because synthetic oil tend to break up sludge in your engine the first time it is introduced.Longer intervals are ok after that.

Aug 03, 2009 | 2004 Infiniti I35

1 Answer

How to program 2002 i35 infiniti keyless remote?


The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

Apr 28, 2009 | 2004 Infiniti I35

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...