Question about Cars & Trucks

Open Question

What is the coolant Capacity for toyota 22R motor

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 333 Answers

SOURCE: 2005 toyota corolla motor oil capacity?

if you have a 1ZZ engine

4.2 quarts, 4.4 quarts with oil filter change

if you have the 2ZZ engine (XRS model) it is

4.4 quarts, 4.6 quarts with oil filter change

NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.


Posted on Sep 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing crankshaft pulley from Toyota 22R motor


it undoes easy if you use a 1/2 " impact gun
or you can remove the inspect cover under the converter and lock the flex plate using a screw drive in the teeth

Sep 30, 2016 | Toyota Cars & Trucks

Tip

How to fix a timing chain rattle on a 85-94 Toyota 22R engine


Toyota 22R 1985-94 85- Celica, P.U., Four runner.

There are two basic different 20-21-22r engines, and three different timing chain setups. The early tall block 20-22r block used a dual row chain with steel backed rubber faced guides, the 83-84 22r used a single row chain with plastic guides and short step bolts, then came the final setup, a shorter block, thinner head, combustion chamber with a large squish area, nearly flat pistons, and pear shaped exhaust ports. It has a single row chain, with plastic guides with long step bolts on the left (drivers side) and short step bolts on the right holding the guides on. On this last 22R there is high incidence of guide failure, usually starting with the long straighter left guide breaking, allowing the chain to rattle against the timing cover in the area where the coolant passes through to the water pump, eventually wearing through and letting coolant into the crankcase. Upon inspection we find the chain is loose when installed, the tensioner is close to half way out on a new engine.

If we use a right side, curved guide and
short step bolts from an 83-84 and a prestretched timing chain, it goes together tight, the tensioner is fully retracted making the whole setup have less play, and less chance to rattle and break the left guide. I've never seen this setup fail, oil leaks from using sealant around the oil ports on the right side have been tough, but using the factory gasket on this side seems to work, also the felpro with printed seal in this area seem to work well.

This is critical if the block and head have been surfaced, making the chain even looser.

Hope this helps

on Apr 29, 2010 | Toyota Pickup Cars & Trucks

2 Answers

93 Toyota ect cab 4x4 22r motor spark plug firing order


I would order a Chilton manual for your truck. eBay is a good place to get one ($25).

Apr 19, 2015 | Toyota Cars & Trucks

1 Answer

What bell housing will mount to a R150 transmission, in order to use a 22r engine ?


go to magicmechanic website and send him the issue--an xpert on any vehicle--will get back to you

Jul 28, 2014 | 1992 Toyota Pickup

1 Answer

When i start my 84 toyota truck 22r i notice white smoke coming out of the exhaust...


If your not overheating or losing coolant, its more than likely engine oil burning. If it is coolant related, possible blown head gasket.

Feb 26, 2014 | 1984 Toyota Pickup Deluxe

1 Answer

What are the 5 wires going into the fuel sending unit for a 2000 toyota 4runner?


To further help you with diagram need to know if 2wd or 4wd and if motor is 22R-E or 22R-TE (Turbo or not) and also email address to send diagram to you

Feb 07, 2010 | 1986 Toyota 4Runner

1 Answer

Replacing ignition lock cylinder for 1987 toyota pickup truck


can send diagram to walk you thru it, need to know if 2wd or 4wd, which motor SOHC,Turbo, 22R-E, 22R-TE,22R, EMAIL ADDRESS TO SEND TO

Feb 07, 2010 | 1987 Toyota Pickup

2 Answers

I have an 86 toyota 4x4 with the 22r motor. my


it could just be the switch,, or more likley to be the resistor burned out or the reostat? (same thing realy)

Oct 27, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Toyota 89 4x4 22r-e Timingbelt


I've rebuilt my engine on my '86 22R-E.
I'm willing to bet the timing chain cover it cracked if the timing chain broke. Coolant does run through the timing chain cover and the water pump is mounted to it.

Best thing to do is get a Chilton manual at the Autoparts store. It runs about $20. That way you have better research material. It will give you step by step procedure to do repairs.

Apr 11, 2009 | 1989 Toyota Pickup SR5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...