Question about 2006 Pontiac G6

Open Question

Program key fob GM/L:22733524 to a pontiac g6

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: 2005 Pontiac SV6 Montana key fob unlocks doors but will not lock

For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.

Posted on Feb 14, 2009

Ad
  • 10 Answers

SOURCE: Key Fob Programming

key fobs have to be the same gm id number on back of fob and need to be programmed for your car by the dealer. its expensive . i had to have it done on my car. other fob i had could not be programmed to work, wrong gm id number

Posted on Apr 23, 2009

emissionwiz
  • 76109 Answers

SOURCE: program gm key fob

There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. SEE THE DEALER.

Posted on Nov 09, 2009

  • 401 Answers

SOURCE: how do i program a key fob for a 2006 Pontiac

you will need to take it to a dealer or some place that has a scanner to program key fobs
IMORTANT TAKE ALL THE KEY FOBS WITH YOU
once the vehicle is put in the learn mode all the fobs have to be programed

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: The key fob for my

The key fobs stop working because the solder joints that hold the battery in place break free. Very easy to fix with a little solder and a soldering iron. I just fixed a bunch of them for people I know including BOTH of the fobs for our 2006 GP GT. Takes about 5 minutes each.

Posted on Jan 18, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions on how to program GM remote key OEM 22733524


Switch ignition ON.

Repeatedly press vehicle information button (it is usually located on the right or left from the steering column depending on year make and model until PRESS TO RELEARN REMOTE KEY is displayed.

Press set/reset button until REMOTE KEY LEARNING ACTIVE is displayed.

Programming mode activated, proceed as follows:

Press and hold LOCK and UNLOCK remote buttons on first remote transmitter simultaneously for 15 seconds.

Wait for acoustic signal (indicates correct programming).

Repeat above procedure to program remaining remote transmitters.

Switch ignition OFF to exit programming mode.

May 17, 2015 | 2007 Pontiac G6 GT Convertible

1 Answer

Locked keys in trunk in pontiack g6 button on fob and door dont work?


It's not expensive to program fobs... my dealer will do a reasonable amount (I had 4 of them) for $40 and he states that it would be the same cost for just 1 fob programming

Aug 16, 2014 | 2005 Pontiac G6

1 Answer

How to program key fob GM/L:22733524


Since you have a Malibu, you have to take it to a Chevy dealer. They have a hand-held computer they plug into your car to activate the BCM ( body control module) to go into programming mode to accept the new transmitter. Probably cost around $50-$60? You can call them for an estimate.

Nov 23, 2012 | 2005 Chevrolet Malibu

1 Answer

2006 pontiac g6 keyless remote programming


must take FOBs to dealer for programming.... there is no other way and it's cheap (you can take any number of FOBs and it's still a flat rate (~$40)

May 20, 2010 | 2006 Pontiac G6

1 Answer

I lost a keyfob with key to my Pontiac G6. I have


Once you program this key fob the other one will not work.The reason is when you program the fobs how ever many you have,you have to program them all at the same time.So if you only program one fob only that fob will work the other one will loose it`s program.You have to take it to the dealership to program the fob.Hope this helps.Good luck.

Mar 30, 2010 | 2005 Pontiac G6

2 Answers

Program gm key fob


There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. SEE THE DEALER.

Nov 09, 2009 | 2009 Pontiac G6

1 Answer

Programing keyless entry for a 2006 Pontiac G6


Do not circumvent the process. Take all your FOBs to a Pontiac/GM dealer. Pay the $40ish to get it all done and walk away with officially programmed FOBs. There is no other way to do this unless you have the highly expensive scan tools they use. Just bite the bullet

Jul 31, 2009 | 2006 Pontiac G6

1 Answer

Key Fob Programming


key fobs have to be the same gm id number on back of fob and need to be programmed for your car by the dealer. its expensive . i had to have it done on my car. other fob i had could not be programmed to work, wrong gm id number

Nov 25, 2008 | 2005 Pontiac G6

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...