Question about Mitsubishi Cars & Trucks

Open Question

Where is blower resistor for lancer - Mitsubishi Cars & Trucks

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
harley9701ha
  • 424 Answers

SOURCE: trying to find the blower motor resistor on my 02 lancer

It is on the right side of the dash. Look under the glove box,there may be a cover that has to be removed to gain access to it. The blower motor is held on by three 8mm bolts.

Posted on Feb 03, 2009

Ad
  • 43 Answers

SOURCE: blower moter resistor location 03 lancer oz ralley

It is under the dash on the passenger side close to the blower fan. Follow the wires, there should be a connector visible for the resistor on the housing. The resistor is usually held in place by a couple screws.
Check the pic. #10 is the resistor pack.
f0b367c.gif

Posted on Dec 09, 2009

  • 14036 Answers

SOURCE: where is the blower motor

REMOVE GLOVE BOX ASSEMBLY LOWER RIGHT SIDE INSTRUMENT PANEL TRIM COVER AND RIGHT COWL TRIM PANEL. WHEN YOU WILL SEE BLOWER WIRES THATS WHERE YOUR RESISTOR LOCATED. DISCONNECT BLOWER MOTOR WIRES THEN REMOVE RESISTOR.

Posted on Dec 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blower motor resistor located on a 1988 dodge lancer


REMOVE GLOVE BOX ASSEMBLY LOWER RIGHT SIDE INSTRUMENT PANEL TRIM COVER AND RIGHT COWL TRIM PANEL. WHEN YOU WILL SEE BLOWER WIRES THATS WHERE YOUR RESISTOR LOCATED. DISCONNECT BLOWER MOTOR WIRES THEN REMOVE RESISTOR.

Dec 06, 2010 | 1988 Dodge Lancer

2 Answers

LOCATION OF BLOWER RESISTER


The Lancer blower motor's are known to heat up and burn out. If you remove it, it is labeled with "Do Not Repair", but it is possible. If you look inside of the block, you will see a flap sticking up - that needs to be soldered down in order to work in the 1 - 3 positions.
The Blower resistor is located on the passenger side under the dash, in the air plenum left of the blower motor.
Thank you for using fixya, and good luck

May 06, 2010 | 2002 Mitsubishi Lancer

1 Answer

Blower moter resistor location 03 lancer oz ralley


It is under the dash on the passenger side close to the blower fan. Follow the wires, there should be a connector visible for the resistor on the housing. The resistor is usually held in place by a couple screws.
Check the pic. #10 is the resistor pack.
f0b367c.gif

Dec 07, 2009 | 2003 Mitsubishi Lancer

2 Answers

My moms heater in her 2002 Mittsubishi Lancer just stopped blowing, no A/C ,no heat all the knobs work fine but it will come on once in a while and i mean like once every two months or so just for the time...


For one, if your blower motor is not blowing ANY air...the blower motor is bad. Period. Are you not getting air flow at all?

If it is VERY intermittent, it could be the heater resistor. This is located under the dash, straight back from the center console and on the ducting.

Oct 31, 2009 | 2002 Mitsubishi Lancer

2 Answers

Need to know how to get to the blower motor resistor for '02 mits


Number 2 is your blower motor resister.
Number 3 is a blend door (damper motor)
Number 4 Hose
Number 5 Blower Motor
Number 6 Blower Case
Open glove box you will see it on you left hand side
It will be a very tight fit, Sure take about 30 to 40 minture.
Let me know if this help you..


eb29c61.jpg

Oct 01, 2009 | 2002 Mitsubishi Lancer

1 Answer

Mitsubishi Lancer ES '02 - Rattling noise in 1st gear...


I think you might need to ask someone to throttle up the car and you look underneath to try locating the rattling noise. Don't forget that this model runs the exaust pipe in front of the motor so it might be an exaust rattle as well??
Cheers

Feb 07, 2009 | 2002 Mitsubishi Lancer

1 Answer

Trying to find the blower motor resistor on my 02 lancer


It is on the right side of the dash. Look under the glove box,there may be a cover that has to be removed to gain access to it. The blower motor is held on by three 8mm bolts.

Feb 03, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...