Question about Mercedes-Benz Cars & Trucks

Open Question

Replace the handbrake cables on a mercedes estate

I have a Mercedes estate and the cable from the handbrake foot peddle has broken and needs replacing and where the cable separates into two I cannot work out how it comes apart

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replace Cabin Filter in my 2002 C240 Mercedes Benz

I have a 2002 C240 Mercedes and need to replace the cabin air filter. Problem, I don't know were it is located or how to replace it. Can you help me.

Posted on Mar 21, 2009

greg_margo
  • 1959 Answers

SOURCE: need a diagram for serpentine belt replacement for mercedes benz

Below is a link for your diagram. Best of luck!
Greg

http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0002R&l=n&catalog=auto&category=2

Posted on Jun 18, 2009

  • 490 Answers

SOURCE: 1987 190d mercedes, hood release cable broke

crawl under the front of your car and by sight or feel find the broken cable and pull on it to open your hood.also it the cable is too short feel if you can find the lever from under the car to release to hood.

Posted on Jul 23, 2009

  • 55 Answers

SOURCE: Need to replace speedometer cable on 95 toyota 4runner

http://www.tacomaterritory.com/forum/

Posted on Aug 24, 2009

  • 1 Answer

SOURCE: hello , where is the handbrake adjuster on volvo v40 - 53reg

V40 cable ajuster is situated under the rear part of center console. Remove rear tray, undo the two posi screws, remove the cup holder rubber base cover to expose one more posi screw-undo.
Now you can lift the section backond off the handbrake lever.
Look under the flexi plastic cover and find a gold nut which has a sprung retainer.
You can now effect adjustment via this nut book suggests six to seven notches from off to on for ideal adjustment.

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I've got a C180 kompressor 2004 mercedes.when I release the handbrake, the light won't go off. I explaind it to a mercedes mechanic and he and friends say that the sensor on brake is loose. I have...


Problem is usually a failed spring in the parking brake pedal mechanism. Only fix I know of is replacement of the pedal assembly. Also make sure your brake fluid level is ok. Low fluid will give you the same light.

Feb 28, 2015 | 2004 Mercedes-Benz C-Class

1 Answer

How to repair broken winder cable on rear passenger window mercedes e430


Remove the inner door panel & replace the
regulator cable assy,switch motor over the new one
if possible

Nov 18, 2012 | 2001 Mercedes-Benz E-Class

1 Answer

HOW DO YOU AJUST THE HANDBRAKE ON A MERCEDES SLK200


I have a 2007 SLK200 can you tell me where and how to adjust the handbrake cables

Feb 23, 2012 | Mercedes-Benz SLK Cars & Trucks

1 Answer

R reg, 1.6i zetec escort estate finesse, clutch peddle constantly deppresed, suspect peddle mechanism not clutch!! how can i reset clutch peddle???


You might have a broken cable or the clutch pedal is broken at the top.Unless it a hydraulic clutch and the fluid level is low.

Oct 09, 2010 | 1998 Ford Escort

1 Answer

1987 190d mercedes, hood release cable broke


crawl under the front of your car and by sight or feel find the broken cable and pull on it to open your hood.also it the cable is too short feel if you can find the lever from under the car to release to hood.

Jul 23, 2009 | Mercedes-Benz 190-Class Cars & Trucks

1 Answer

Merecedes C270 - the foot operated parking brake,


Hi :)
Very common problem do loads. You need to lubricate the handbrake linkage under the rear seats ( the bit ur bum goes on). If you have a estate car then the seats will flip up but if its a saloon car then you will have to remove 2 13mm nuts for either side seat. When ur under there, u will see a little black panel in the middle, remove it 2 8mm self tappers and a 13mm nut. right you should now see the linkage where the cable splits to either side of the car. Get a load of wd-40 and spray whilst some else operates the handbrake 100 times or so. sorted! Dont forget to adjust the handbrake at the wheels after, go all the way with the adjust and back off two clicks either side.
Hope this works and good luck1
Carlo@ss

Apr 11, 2009 | 2003 Mercedes-Benz C-Class

1 Answer

Mercedes E300 1999 handbrake probelem


hi,it has a cable,lift your car,seem your cable is jump in to the rail,or disconnected from two rear wheel,ty

Mar 10, 2009 | 1999 Mercedes-Benz E-Class

1 Answer

Mercedes 300 cd 1982 hood cable


Where is the cable broken at? They commonly break right there where the under dash latch is at...

Sep 25, 2008 | 1989 Mercedes-Benz Mercedes Benz S Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...