Question about 2002 Oldsmobile Bravada
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try starting your car and letting it run for a min disconnect the bat and if it dies then you need to find a bad wire or a bad ground to the alternator. something might not be telling it to put out any power to re-charge your batt
Posted on Mar 24, 2009
SOURCE: cant find fuse box
When you stand in front of the car, look at the battery.
now look furter away from you - that's the air filter casing. (It has 4 screws fastening it, 3 are easily visible)
now look even further away from you - THERES THE FUSE BOX!!! (it has a screw in the middle.)
Posted on Jul 08, 2009
If it is only 1 window,it is unlikely a fuse as it would control all windows and probably 1 or 2 more systems.The fuse box under the hood should not be an issue either since it is a very high power controller and is called a power distribution box.If the window has an option to be operated by more than one switch and does not work with either the motor is probably bad.If it is the driver window and has only a switch to control that particular window I can tell you a fairly simple way to determine what is wrong.If it is a different window which can be operated by 2 separate switches,I would say the window motor.If you would like more help or I did not get the scenario correct,please write back and I will get an auto link to your post and we'll figure it out.Good luck! Greg
Posted on Sep 18, 2010
first thing you need the fuse on that wire second either you have a short between the alt and bat or your alt might be grounded internally auto zone has a tester to check the voltage from your alt. it may have a faulty voltage regulator
Posted on Apr 22, 2011
SOURCE: there are two wires coming
There should be a tag or marking for the amperage on the fuseable link, this should be rated lower [ say the original wire is 8 gage, the fuseable link should be a lighter, like 10 gage ] then the wire it protects and should fail first. Is the spliced wire smaller then the Fuse link?, If so then you should replace the wire with the same size as the orignial one from the factory.
NOTE: Fuseable links have a isulation that's fire resistant, common wire shouldn't be used in this situation as there's a fire danger.
Posted on Apr 22, 2011
Tips for a great answer:
Dec 09, 2015 | Cars & Trucks
May 15, 2012 | 2005 Chevrolet Suburban
Sep 23, 2010 | 2007 Chevrolet Silverado 2500HD
May 10, 2010 | 2004 Nissan XTerra
Apr 05, 2010 | 1991 Honda Accord
Mar 06, 2010 | 1997 Honda Prelude
Aug 15, 2009 | 2000 Oldsmobile Intrigue
Jun 24, 2008 | 1997 Ford Expedition
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: