Question about Cars & Trucks
Check engine light on U1017 & & u1064
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
wow thermostat >>>> shucks i believe its evep emissions code like faulty gas cap ....you can reset any computer the chck eng light will come on in 50 to 100 miles if not fixed....
Posted on May 08, 2009
The code is for the TPS , several things can cause this tps not plugged in , or plugged in after the car was started. If the car runs good go to auto zone let them erase the code for free with their scanner and then see if it comes back on. most likely it was just a accident. but go check to make sure it is plugged in and that the wires to it are not pinched in any way.
Posted on May 28, 2009
It would be better if you got the codes read and then post back with the code.There are numerous codes that can cause the check engine light to go on.Auto Zone will do this for free.There are a few other parts stores that do this for free also.Hope this helps.Good luck.
Posted on Mar 15, 2010
Sounds like a blown fuse to one of the computers, either the ECM (engine control computer) or the BCM (body control computer). The ECM fuse should be under the hood and the BCM fuse in the cabin. The U1064 means a loss of communication on the data line between computers (64 usually is the BCM). If the computers can't communicate they will shut down the engine and set trouble codes. The other issue could be a faulty ignition switch not allowing power to a computer (but not common for cavaliers or sunfires). If fuses are good, chances are you have a faulty computer somewhere in the data line, shorting out communication.
Posted on Feb 24, 2011
As previous post stated you may have data cable unhooked somewhere.
B0040- Second Row Right Frontal Stage 2 Deployment Control (Subfault)
B0099- Right Frontal Restraints Sensor 2 (subfault)
U1026- Loss of Active Transfer Case Control Module Communications.
U1064- I do not have a listing for that code on hand. May be able to obtain it when I get to my shop tomorrow.
Posted on Oct 14, 2011
Tips for a great answer:
Nov 23, 2015 | 2007 Saturn Ion
Sep 03, 2015 | Pontiac Cars & Trucks
Apr 03, 2014 | 2005 Chevrolet Colorado
Oct 22, 2013 | 2007 GMC Canyon Crew
Oct 14, 2011 | 2005 Chevrolet Colorado
Apr 06, 2011 | Chevrolet Blazer Cars & Trucks
Feb 24, 2011 | 2004 Pontiac Sunfire
Mar 15, 2010 | 2002 Buick LeSabre
Mar 24, 2009 | 1999 Chevrolet Blazer
46 people viewed this question
Usually answered in minutes!