Question about 2000 GMC New Sierra 1500

Open Question

1999 gmc 1500 s8203 sensor location

Need to replace s8203 sensor and cannot locate it in the engine

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 180 Answers

SOURCE: I NEED TO KNOW WHERE

Shold be on passenger side or behind distributer

Posted on Jan 02, 2009

emissionwiz
  • 75822 Answers

SOURCE: cant find the location of this oil pressure switch on my 1999 gmc savana 1500 van with a 350 engine

very rear of engine center of block behind intake.

Posted on May 12, 2009

  • 18 Answers

SOURCE: 1999 gmc sierra 1500

it should be between the grill and radiator on the drivers side

Posted on May 21, 2009

  • 432 Answers

SOURCE: i have a 2002 gmc sierra 1500, need to change the

There are several located within the exhaust system(PIPE)You need to know witch one.

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the egr valve to vortec engine located


generaly installed beside the evaporation part near the throttle gate.

Mar 31, 2015 | 2004 GMC Sierra

1 Answer

Crank sensor location


The crank sensor is on the right side of the crankshaft pully. (Bottom Center of Engine)

Oct 25, 2013 | GMC Cars & Trucks

1 Answer

Where is the fuel pressure sensor located on a 2002 GMC Sierra 1500 4X4?


The fuel tank pressure sensor on a 1999 GMC Sierra is located on the top of the fuel tank on the fuel pump itself. Most say that you need to drop the fuel tank to replace it but if you have access to a lift you can replace it without removing the fuel tank. By removing the rear U joint straps and moving the driveshaft to the side you can see and access the sensor for replacement. Chock wheels to prevent movement of the vehicle after driveshaft is disconnected.

Apr 11, 2013 | GMC Sierra Cars & Trucks

2 Answers

Where is the cam shaft location sensor located on a 2005 gmc yukon


camshaft sensor located above crankshaft pulley, the camshaft sensor mounted on the front timing cover above the crankshaft pulley.

Sep 17, 2012 | 2005 GMC Yukon

3 Answers

CHECK ENGINE LIGHT STAYS ON. WAS TOLD IT WAS THE 02 SENSOR/VALVE. WHERE DO I FIND THIS? GMC SIERRA 1500


You should have 5, O2 sensors on your Sirera. What are the DTC codes, each codes will indicate which O2 sensor needs to be addressed, or is this an answer with someone guess what the check engine light is saying.
Thye check engine light could be from a bad O2 sensor to just a bad or loose gas cap to a transmission issues.
Thank you for using fixya and note that Auto Zone and most larger auto parts store will scan DTC codes free of charge.

Jun 07, 2010 | 2006 GMC Sierra 1500 2WD

1 Answer

Where is the camshaft position sensor located on 1999 gmc yukon denali engine


It is located at the front of the engine under the crankshaft harmonic balance. Real easy to get to and replace.

Feb 19, 2010 | 1999 GMC Yukon Denali

1 Answer

1999 GMC Sierra 5.3L knocking sound around Catalytic Conerters? ?


on my gmc i have 2 knock sensors and im not possitive if you have two or not under your intake mani but when i replaced both mine i got the same code of low input so i took the small needle out and wire brushed it clean and also traced and ran a new wire just to be safe and that solved my problem. as for bank 1,2 if it helps any my bank one is located engine side driverside and bank2 is engine side passenger side and 3 and 4 are underneath bed side. but you can see the sensors if you look real close near the headers. hope this helps
See less

Jun 27, 2009 | 2003 GMC Sierra 1500

1 Answer

Need to know where sensor 1 (oxygen sensor) on bank 1 is located


It would be on the left header pipe as you sit in the truck. Its the sensor in front of the cat

Jan 16, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...