Question about 2006 Ford Fusion

Open Question

2008 Ford Fusion

Service engine light. not running right engine codes P050B, P0352 & P0354

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Ford Fusion 04 Engine Management Light

I had a 2002 model 1.4 Fiesta, same problem Engine management light or ECA, electronic accelaration Control (EAC), it needs a ford dealer to do a computer diagnostic, most likely that it will need replaced.

Mt friend who is a mechanic for ford said that it was a common factory fault and is very common in 1.4 zetec /duratec petrol models.

I now have a 2007 Fusion and was quick to see if this problem had been sorted on this model, and it has!!

Hope this helps!!

Posted on Dec 16, 2008

Ad
Mustgo
  • 2359 Answers

SOURCE: how to reset airbag light on 2008 ford fusion

Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity2_bing.gif problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate me answer if it is useful to you.


Cheers,

Mustgo

Posted on Dec 16, 2009

  • 181 Answers

SOURCE: my right head light is out on my 2008 ford fusion.

There is a splash shield in the right side wheel well. If you take out the screw you can get the access cover off to get to the headlight. It is labeled bulb access.

Posted on May 17, 2010

  • 4861 Answers

SOURCE: how do i remove radio from 2008 ford fusion radio ...

http://www.fitaudio.com/index.php?CategoryID=13

Posted on May 26, 2010

moparownr
  • 667 Answers

SOURCE: my 2006 ford fusion check engine light is on and

P0882 - TCM Power Input Signal Low, this is a transmission code, I recommend that you take it to a dealer or qualified transmission shop. Hope this helps.

Posted on Jul 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the probable causes of DTCs P0352 and P1684?


P0352 Ignition Coil Primary Secondary Circuit Malfunction Is your vehicle misfiring ? What make , model an year vehicle ? Just had a ford fusion with this problem on three cylinders . p0353 , p0355 an p0356 . He never had the spark plugs changed , the plug gap was way more then it should have been , caused the driver for one cylinder to short out inside the engine computer . $ 800.00 from ford. The coil is bad or the circuit or the PCM -engine computer is bad .

Oct 28, 2015 | Cars & Trucks

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

Fix a po603 code on 2008 ford fusion


Start by charging the vehicles battery and clean terminal, once the battery is charged and the terminals are clean and secure, erase code. If the code comes back ON you may have to reprogram or replaced ECM/PCM

Dec 06, 2014 | 2008 Ford Fusion

1 Answer

Check engine light on, lost power. ford Fusion 2008


Take it to a auto parts store...they can put a machine on it and read the codes for free.

Mar 18, 2014 | 2008 Ford Fusion

1 Answer

2007 Mercury Milan Premier V6 Misfiring


P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Nov 07, 2013 | Mercury Milan Cars & Trucks

1 Answer

2008 for fusion engine light is on


run fault codes to see which sensor/servo is not working and causing a fault that may damage the engine or gear box. Replace faulty units.

Sep 06, 2013 | 2008 Ford Fusion

1 Answer

Ford edge wont start codes ,p0351,p0352,p0354,p0316


You may need a mechanic for this one.
The first three codes are for coil problems on cylinders 1-2-4.
Code 316 is for a cylinder miss on startup which would follow along with the other codes.
Someone would need to test the coils and the circuits that power them.
It is unlikely all three have failed, but rather something with the computer or the crank or cam sensors.

Jan 08, 2013 | 2008 Ford Edge

1 Answer

2004 Taurus DOHC; All COPs and spark plugs have been replaced. Intermittent problem (car may run great for weeks at a time) Then engine runs very poorly, and these codes come up: P0351, P0352,...


codes p0350-p0360 are all coil primary/secondary failure codes. could possibly be the pcm its self if you have already replaced all 6 coils and plugs. there have also been cases i have seen where a remote start system is the cause, if one is installed check the wiring where they tie into the ignition system

Sep 17, 2011 | 2004 Ford Taurus

1 Answer

Service engine light on OBD reader gives back code p0352 already changed coil on # 2 cylinder


p0352 is not a misfire code... and anytime a coil is changed you must also change the sparkplug

May 18, 2011 | Ford Explorer Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...