Question about 2001 Dodge Dakota

Open Question

What does codes p1294 and p1494 mean? - 2001 Dodge Dakota

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 599 Answers

SOURCE: 96 dodge caravan code p1494

P1494 Leak detection pump pressure or mechanical fault, hope this helps

Posted on May 15, 2009

rad0279
  • 36 Answers

SOURCE: What does a p1294 code mean on a 2001 Dodge Ram 1500

The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Solution start by checking or replacing the sparkplugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit. Did you replace the TB or make an adjustment to the TPS? As for your spark knock(pinging) this could be related or not. Most of the time pinging occurs is from high combustion tempertures. This could caused by worn plugs,cap and rotor. If not that maybe the truck is running lean but I doubt it because you did not get a code for that. Another thing that could cause pinging on a Dodge truck is oil going into the combustion chambers(i.e. the intake belly pan gasket leaking very common). These are just pointers for you to look at. If you find something else please let us know, it is very difficult to diagnos a problem by word of mouth.

Posted on Jun 17, 2012

  • 76 Answers

SOURCE: What does error code p1494 mean?

vacume leak most common is gas cap not sealing

Posted on Oct 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAN YOU PLEASE TELL ME WHAT THIS CODE MEANS P1294 FROM A SMOG CHECK ON A 1997 DODGE STRATUS


The code is "target idle not reached". This indicates that the idle is too fast and this is what sets the code. The cause could be the TPS or the IAC, but normally if these were the problem, you would have additional codes to indicate them.. The P1294 without any other code is most likely going to be caused by an intake leak, one that occurs after the MAF sensor if your car has one, or the throttle body if not.

Mar 13, 2015 | Dodge Cars & Trucks

1 Answer

ROUBLE CODE P1294


The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Start by checking or replacing the spark plugs and wires. Try to use Autolite spark plugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit.

Jan 18, 2012 | 1996 Dodge Neon

1 Answer

I have a 1999 mitsubishi eclipse with the stock 420a (non-turbo) engine. The check engine light turner on with two codes, p1494 and p1495. I fixed p1294 but still have no clue what p1495 is or how to fix...


I kept getting this code on my 2001 stratus it had the 3.0. The problem for me was my egr valve. I was able to clean mine with card cleaner and it worked for me. But every six months it came back and had to clean it again. Later found out I had some vacuum leaks which were causing car to run rich as cause more junk to clog egr. After fixing those the problem stopped. Good luck.

Jun 18, 2011 | Chrysler 300 Cars & Trucks

1 Answer

What does the P1294 Manufacturer Specific Code mean in a failed Emissions OBD Test?


P1294 Target idle not reached this is the code in the chrysler list of codes for this number and reading it ,it must mean the idle isnt correct when engine is warm but i could be wrong here in my interpretation as our europeon test puts a probe up the exhaust and the idle doesnt come into the equation .So long as the gas output from the engine is below the specified limits on first run at 2500 rpm then idle is read but this is only for the CO and oxygen levels in the exhaust gas as the level of CO2 will depend on the size of the engine but must be below 2% on idle ,so a big monster american gas burner will still be below the 2% by volume on idle but rise with the increase in engine RPM .Complicated business and costly when the cat goes

Mar 25, 2011 | 1999 Jeep Grand Cherokee

1 Answer

What does the code P1494 means on my 99 jeep grand cherokee


LEAK DETECTION PUMP SYSTEMS (P1494, P0442, P0455, P0456),

Jun 10, 2010 | 2001 Jeep Grand Cherokee

2 Answers

Target Idle Not Reached (Chrysler, Jeep)i am getting a dash display code of p1294. how do i find the problem? I did find a vacuum line broke and fixed but the error came back!


The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Solution start by checking or replacing the sparkplugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit. Did you replace the TB or make an adjustment to the TPS?

Sep 22, 2009 | 2003 Jeep Wrangler

1 Answer

Codes for durango p0443-0753-1765-1494


danbalue, a code P1765 means Transmission 12V Supply Relay Control Conditions and P1494 means EVAP LDP Pressure Switch Fault Conditions.

I found info on the following codes:
P0443 - http://www.obd-codes.com/p0443
P1494 - http://www.check-engine-light.com/dodge

Good luck.

Sep 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

96 dodge caravan code p1494


P1494 Leak detection pump pressure or mechanical fault, hope this helps

May 15, 2009 | 1996 Dodge Caravan

Not finding what you are looking for?
2001 Dodge Dakota Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...