Question about 1998 Cadillac DeVille

Open Question

Engine over heatingneed to drain block - 1998 Cadillac DeVille

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the drain plug for the block drain on a Kubota engine V1902-B?


[PDF]KUBOTA DIESEL ENGINE - Waterax




waterax.com/app/uploads/2015/09/ENGINE-MANUAL-D902.pdf







engine maintenance. it is KUBOTA's policy to utilize as quickly as possible .... Be sure to close the coolant drain valve, secure the pressure cap. and fasten the .... Oil drain plug. (18) Oil ... around the machine. it may catch on moving (B) "OFF".




Kubota V2203 Block Water Drain? - Diesel Bombers




www.dieselbombers.com > ... > Diesel Engine Conversions







Nov 21, 2013 - On my Kubota V2203 DI above the Oil filter is a long bolt of which the only thing ... I did not even know that Block Water Drain was there till last night I ...Also, the pipe plugs in the engine are a Japanese style, but we've ... Kubota v2203 vsv1902, ziegler, Diesel Engine Conversions, 4, 01-10-2015 06:27 PM.




Kubota Engine Service Tips




johnsoncitykubota.com/Kubota%20Engine%20Service%20Tips.htm









If the reading is 11 volts or more while you are trying to crank the engine see the ...Other causes include defective glow plugs or low cranking speeds from a weak battery.... We have not seen it "ruin" anyone's tractor yet, so drain the tank, refill with ....passages between the cylinder head and the block became 90% blocked.




Kubota L2550 needs block heater! - Yesterday's Tractors




www.yesterdaystractors.com > Discussion Forums > Tractors











Jan 25, 2011 - 25 posts - ‎14 authors

Oldmax, I could swear I was looking at a closeup of my engine, except for the colour.... V1702, V1703, V1902, V1903, V2003, V2003T, V2203 (4 cylinder) Part No. ... BSeries (Except 2 cylinder) Part No. Watt Volt Diameter Type .... Paul, does the tractor have a block drain plug, and a thermostat bypass ...

Jan 06, 2016 | Cars & Trucks

1 Answer

How can I drain Peugeot 407 2.0 diesel coolant?


That is hard to believe, since the bottom hose is the lowest point in the cooling system. There is an engine block drain plug which would let out what coolant is remaining in the engine, but it would be about a liter at most left in the engine. To completely drain the coolant, remove the block drain-there may be a drain plug on both sides of block, so you should check for that.

Mar 01, 2013 | Cars & Trucks

2 Answers

Were is the drain plug located on a 2007 chevy 5.3 on the passenger side of engine . is it behind the ac unit. i want to put a engine block heater in.


The block drain is on the passenger side of the engine, in the center of the block near where the oil pan attatches to the block.

Engine Block Plugs/Sensors


Engine Block Plugs/Sensors
100 - Engine Block
100 - Engine Block
101 - Oil Gallery Plug - Front
110 - O-Ring
111 - Oil Gallery Plug - Rear
112 - Oil Gallery Plug - Side
113 - Washer
114 - Engine Coolant Heater
115 - Washer
116 - Oil Gallery Plug - Side
117 - Washer
130 - Transmission Housing Locating Pin
145 - Washer
146 - Engine Block Coolant Drain Hole Plug
701 - Crankshaft Position (CKP) Sensor
702 - O-Ring
718 - Knock Sensor
718 - Knock Sensor
739 - Bolt
739 - Bolt
750 - CKP Sensor Bolt

Oct 19, 2010 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

How to drain radiator


hello. on the drivers side of radiator is a drain. here is a picture and the instructions for draining the coolant out.



  • Install a tube on the radiator drain. Place the end of the tube in the drain pan.
  • After the engine cools down, remove the radiator cap.
  • Completely open the radiator drain ****.
  • Allow the coolant to drain from the system until the flow stops.
  • Place a drain pan under the block drain hole plug.
  • Remove the drain hole plug from the engine block.
  • Allow the coolant to drain from the block until the flow stops. There may be more drainage from the radiator at this time.
  • Install the block drain hole plug.
  • Close the radiator drain ****.


  • 1ab38d9.gif

    Jul 04, 2010 | 1997 GMC Suburban

    3 Answers

    Where is the drain plug for the radiator


    Should be a drain **** at the bottom of the radiator that unscrews out. It looks like a wing nut has been welded to a bolt on the end of it. Another way to do this is just pull off the bottom hose.

    Mar 31, 2010 | 2001 Jeep Cherokee

    1 Answer

    Im replacing timing belt, accessory belts and water pump on my hyundai elantra gls 1997 sta wgn auto transmission. (1)Where is bolt to drain engine block coolant?(2)After removing front engine mountin


    (1) No need to know if engine block coolant drain plug was available. Once the water pump was removed, all engine block coolant was drained. (2) After removing the three engine mounting bracket bolts, I also removed the mount bracket from the the body and made enough room to replace the timing belt easier.

    May 18, 2009 | 1997 Hyundai Elantra

    2 Answers

    Draining the Engine Block of Coolant.


    the drain plug is under the front of the truck on the drivers side back of the radiator. you have to turn it to open it .

    Mar 01, 2009 | 2000 Pontiac Montana

    2 Answers

    Engine block coolant drain plug


    there is no coolant drain on the block. however take the lower radiator hose off and you should be able to get it to drain completely.

    Aug 30, 2008 | 1997 Buick Skylark

    1 Answer

    Coolant drain plug on engine block


    there is no drain plug on the engine block unfortunately, however taking the lower radiator hose off will drain almost all the coolant out off the block. then reconnect the lower hose and fill completely with just water and flush solution let sit for a few minutes. then take lower hose off again let it completely drain. reconnect lower hose and fill with 60/40 mix of coolant this will protect to -40 degrees F. when you have it completely full keep cap off radiator and start vehicle turn your heater on hot and the fan to high. top off with coolant and replace cap. there should be no need to bleed system of air. please rate this solution.

    Aug 30, 2008 | 1997 Buick Skylark

    2 Answers

    Engine block coolant drain plug location


    They are on the side of the engine block, there will either be a pipe plug or a sensor in the threaded hole(s)

    Aug 22, 2008 | 2007 Chevrolet Tahoe

    Not finding what you are looking for?
    1998 Cadillac DeVille Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cadillac Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Cadillac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...